How enable GPU decoding?

Microsoft Windows specific usage questions
Forum rules
Please post only Windows specific questions in this forum category. If you don't know where to post, please read the different forums' rules. Thanks.
AliG
New Cone
New Cone
Posts: 5
Joined: 30 Mar 2011 12:50

Re: How enable GPU decoding?

Postby AliG » 30 Mar 2011 12:58

I have a problem too :(

When I try to use GPU acceleration, it shows just green screen :?:

using ATI Mobility Radeon HD 4300, latest drivers,
video is H264 - MPEG-4 AVC
VLC 1.1.8, clean

any idea?

Code: Select all

main debug: processing request item a.mkv node Seznam skladeb skip 0 main debug: resyncing on a.mkv main debug: a.mkv is at 1 main debug: starting new item main debug: creating new input thread main debug: Creating an input for 'a.mkv' main debug: thread started main debug: thread (input) created at priority 1 (../.././src/input/input.c:220) main debug: using timeshift granularity of 50 MiB main debug: using timeshift path 'C:\Users\Admin\AppData\Local\Temp' main debug: `file:///E:/Klipy/10/a.mkv' gives access `file' demux `' path `E:\Klipy\10\a.mkv' main debug: creating demux: access='file' demux='' path='E:\Klipy\10\a.mkv' main debug: looking for access_demux module: 2 candidates main debug: no access_demux module matching "file" could be loaded main debug: TIMER module_need() : 1.000 ms - Total 1.000 ms / 1 intvls (Avg 1.000 ms) main debug: creating access 'file' path='E:\Klipy\10\a.mkv' main debug: looking for access module: 2 candidates filesystem debug: opening file `E:\Klipy\10\a.mkv' main debug: using access module "filesystem" main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms) main debug: Using AStream*Stream main debug: pre buffering main debug: received first data after 0 ms main debug: pre-buffering done 1024 bytes in 0s - 1000000 KiB/s main debug: looking for stream_filter module: 2 candidates main debug: no stream_filter module matching "any" could be loaded main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms) main debug: looking for stream_filter module: 1 candidate main debug: using stream_filter module "stream_filter_record" main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms) main debug: creating demux: access='file' demux='' path='E:\Klipy\10\a.mkv' main debug: looking for demux module: 52 candidates mkv debug: | + Seek head mkv debug: | | + Seek mkv debug: | - info at 4135 mkv debug: | + Information mkv debug: | | + TimecodeScale=1000000 mkv debug: | | + Muxing Application=libebml v0.7.7 + libmatroska v0.8.1 mkv debug: | | + Writing Application=mkvmerge v2.6.0 ('Kelly watch the Stars') built on Mar 24 2009 15:23:17 mkv debug: | | + Duration=209640 mkv debug: | | + Date=Mon Aug 30 06:48:37 2010 mkv debug: | | + UID=532337830 mkv debug: | | + Seek mkv debug: | - tracks at 4297 mkv debug: | + Tracks mkv debug: | | + Track Entry mkv debug: | | | + Track Number=1 mkv debug: | | | + Track UID=1965143986 mkv debug: | | | + Track Type=video mkv debug: | | | + Unknown (N11libmatroska19KaxTrackFlagEnabledE) mkv debug: | | | + Track Default=1 mkv debug: | | | + Unknown (N11libmatroska18KaxTrackFlagForcedE) mkv debug: | | | + Track Lacing=0 mkv debug: | | | + Track MinCache=1 mkv debug: | | | + Track TimeCodeScale=1.000000 mkv debug: | | | + Unknown (N11libmatroska21KaxMaxBlockAdditionIDE) mkv debug: | | | + Track CodecId=V_MPEG4/ISO/AVC mkv debug: | | | + Unknown (N11libmatroska17KaxCodecDecodeAllE) mkv debug: | | | + Track CodecPrivate size=38 mkv debug: | | | + Track Default Duration=40000000 mkv debug: | | | + Track Language=`und' mkv debug: | | | + Track Video mkv debug: | | | | + width=720 mkv debug: | | | | + height=400 mkv debug: | | | | + Unknown (N11libmatroska22KaxVideoFlagInterlacedE) mkv debug: | | | | + display width=720 mkv debug: | | | | + display height=400 mkv debug: | | + Track Entry mkv debug: | | | + Track Number=2 mkv debug: | | | + Track UID=126865594 mkv debug: | | | + Track Type=audio mkv debug: | | | + Unknown (N11libmatroska19KaxTrackFlagEnabledE) mkv debug: | | | + Track Default=1 mkv debug: | | | + Unknown (N11libmatroska18KaxTrackFlagForcedE) mkv debug: | | | + Track Lacing=1 mkv debug: | | | + Track MinCache=0 mkv debug: | | | + Track TimeCodeScale=1.000000 mkv debug: | | | + Unknown (N11libmatroska21KaxMaxBlockAdditionIDE) mkv debug: | | | + Track CodecId=A_FLAC mkv debug: | | | + Unknown (N11libmatroska17KaxCodecDecodeAllE) mkv debug: | | | + Track CodecPrivate size=44096 mkv debug: | | | + Track Default Duration=92879818 mkv debug: | | | + Track Language=`und' mkv debug: | | | + Track Audio mkv debug: | | | | + afreq=44100 mkv debug: | | | | + achan=2 mkv debug: | | | | + abits=16 mkv debug: | | + Seek mkv debug: | - chained seekhead at 85542625 mkv debug: | + Seek head mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 49663 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 706562 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 1683712 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 2390739 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 3438663 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 4216249 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 5060812 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 5840384 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 6786685 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 7642857 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 8526963 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 9551984 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 10690663 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 11549695 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 12120257 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 12908939 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 13888124 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 14913840 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 15797840 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 16788617 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 17430500 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 18222751 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 19151711 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 19975618 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 20714867 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 21710573 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 22516698 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 23325381 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 24126648 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 24894893 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 25719277 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 26547482 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 27389133 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 28169567 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 29069676 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 29731279 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 30485434 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 31215798 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 31710197 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 32239384 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 32685900 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 33161906 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 33746848 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 34181341 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 34638163 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 35311341 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 35947154 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 36526651 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 37282992 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 37948473 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 38703172 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 39306787 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 40078789 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 41056811 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 41878140 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 42885118 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 44003340 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 44760644 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 45835149 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 46711233 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 47657563 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 48686718 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 49775724 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 50662769 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 51642171 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 52552376 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 53399864 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 54158039 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 55064359 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 55915737 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 56863246 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 58141870 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 59152295 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 59978915 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 60911833 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 61746530 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 62442679 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 63133773 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 63735533 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 64260138 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 64929998 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 65830141 qt4 debug: IM: Setting an input mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 66683310 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 67485218 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 68105869 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 68703763 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 69557900 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 70574067 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 71475913 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 72760062 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 73629690 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 74304947 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 75183731 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 76252491 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 77456323 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 78404960 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 79553272 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 80719442 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 81764523 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 82729072 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 83554259 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 84542512 mkv debug: | | + Seek mkv debug: | - unknown seekhead reference at 85371828 mkv debug: | | + Seek mkv debug: | | + Unknown (N7libebml8EbmlVoidE) mkv debug: | - cues at 85540881 mkv debug: | + Cues mkv debug: | - loading cues done. mkv debug: | + Preload Unknown (N7libebml8EbmlVoidE) mkv debug: | + Information mkv debug: | + Tracks mkv debug: | + Preload Unknown (N7libebml8EbmlVoidE) mkv debug: | + Cluster mkv debug: found 2 es main debug: selecting program id=0 mkv debug: Starting the UI Hook main debug: thread started main debug: thread (mkv event thread handler) created at priority 0 (../../../.././modules/demux/mkv/demux.cpp:201) main debug: using demux module "mkv" main debug: TIMER module_need() : 17.000 ms - Total 17.000 ms / 1 intvls (Avg 17.000 ms) main debug: looking for a subtitle file in E:\Klipy\10\ main debug: looking for decoder module: 34 candidates avcodec debug: libavcodec already initialized avcodec debug: trying to use direct rendering avcodec debug: ffmpeg codec (H264 - MPEG-4 AVC (part 10)) started main debug: using decoder module "avcodec" main debug: TIMER module_need() : 2.000 ms - Total 2.000 ms / 1 intvls (Avg 2.000 ms) main debug: thread (decoder) created at priority 0 (../.././src/input/decoder.c:301) main debug: thread started main debug: looking for decoder module: 34 candidates main debug: using decoder module "flac" main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms) main debug: thread (decoder) created at priority 2 (../.././src/input/decoder.c:301) main debug: thread started main debug: looking for meta reader module: 2 candidates lua debug: Trying Lua scripts in C:\Users\Admin\AppData\Roaming\vlc\lua\meta\reader lua debug: Trying Lua scripts in C:\Program Files (x86)\VideoLAN\VLC\lua\meta\reader lua debug: Trying Lua playlist script C:\Program Files (x86)\VideoLAN\VLC\lua\meta\reader\filename.lua main debug: no meta reader module matching "any" could be loaded main debug: TIMER module_need() : 2.000 ms - Total 2.000 ms / 1 intvls (Avg 2.000 ms) main debug: `file:///E:/Klipy/10/a.mkv' successfully opened main debug: Buffering 0% main debug: Buffering 0% main debug: Buffering 13% main debug: Buffering 26% main debug: Buffering 40% main debug: Buffering 53% main debug: Buffering 66% main debug: Buffering 80% main debug: Buffering 93% main debug: Stream buffering done (320 ms in 0 ms) avcodec debug: Available decoder output format 61 (PIX_FMT_DXVA2_VLD) avcodec debug: Trying DXVA2 avcodec debug: DLLs loaded flac debug: decode STREAMINFO flac debug: channels:2 samplerate:44100 bitspersamples:16 flac debug: STREAMINFO decoded main debug: reusing aout main debug: looking for audio output module: 4 candidates aout_directx debug: Opening DirectSound Audio Output aout_directx debug: found device: Primární ovladač zvuku aout_directx debug: found device: Reproduktory (Zvukové zařízení High Definition Audio) aout_directx debug: found device: Digitální zvuk (SPDIF) (Zvukové zařízení High Definition Audio) avcodec debug: D3dCreateDevice succeed avcodec debug: OurDirect3DCreateDeviceManager9 Success! avcodec info: obtained IDirect3DDeviceManager9 avcodec info: DXVA2CreateVideoService Success! avcodec debug: - 'DXVA2_ModeMPEG2_IDCT' is supported by hardware avcodec debug: - 'H.264 VLD, no FGT' is supported by hardware avcodec warning: - Unknown GUID = 4245F676-2bbc-4166-XXXX avcodec warning: - Unknown GUID = 6719B6FB-5cad-4acb-XXXX avcodec debug: - 'VC-1 VLD' is supported by hardware avcodec warning: - Unknown GUID = CA15D19A-2b48-43d6-XXXX avcodec warning: - Unknown GUID = 5B23D46D-fa5f-4fdc-XXXX avcodec debug: Trying to use 'H.264 VLD, no FGT' as input avcodec debug: NV12 is supported for output avcodec debug: Using 'H.264 VLD, no FGT' to decode to 'NV12' avcodec debug: DxCreateVideoDecoder id 28 720x400 avcodec debug: IDirectXVideoAccelerationService_CreateSurface succeed with 17 surfaces (720x400) avcodec debug: we got 2 decoder configurations avcodec debug: configuration[0] ConfigBitstreamRaw 2 avcodec debug: configuration[1] ConfigBitstreamRaw 2 aout_directx debug: device supports 2 channels (DEFAULT!) aout_directx debug: device supports 1 channel aout_directx debug: Windows says your SpeakerConfig is stereo aout_directx debug: creating DirectSoundThread main debug: thread (DirectSound Notification Thread) created at priority 15 (../../.././modules/audio_output/directx.c:321) main debug: thread started aout_directx debug: DirectSoundThread ready main debug: using audio output module "aout_directx" main debug: TIMER module_need() : 700.000 ms - Total 700.000 ms / 1 intvls (Avg 700.000 ms) main debug: output 's16l' 44100 Hz Stereo frame=1 samples/4 bytes main debug: mixer 'f32l' 44100 Hz Stereo frame=1 samples/8 bytes main debug: filter(s) 'f32l'->'s16l' 44100 Hz->44100 Hz Stereo->Stereo main debug: looking for audio filter module: 14 candidates audio_format debug: f32l->s16l, bits per sample: 32->16 main debug: using audio filter module "audio_format" main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms) main debug: found a filter for the whole conversion main debug: looking for audio mixer module: 3 candidates main debug: using audio mixer module "float32_mixer" main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms) main debug: input 's16l' 44100 Hz Stereo frame=1 samples/4 bytes main debug: looking for audio filter module: 1 candidate scaletempo debug: format: 44100 rate, 2 nch, 4 bps, fl32 scaletempo debug: params: 30 stride, 0.200 overlap, 14 search scaletempo debug: 1.000 scale, 1323.000 stride_in, 1323 stride_out, 1059 standing, 264 overlap, 617 search, 2204 queue, fl32 mode main debug: using audio filter module "scaletempo" main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms) main debug: filter(s) 's16l'->'f32l' 44100 Hz->44100 Hz Stereo->Stereo main debug: looking for audio filter module: 14 candidates audio_format debug: s16l->f32l, bits per sample: 16->32 main debug: using audio filter module "audio_format" main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms) main debug: found a filter for the whole conversion main debug: filter(s) 'f32l'->'f32l' 48510 Hz->44100 Hz Stereo->Stereo main debug: looking for audio filter module: 14 candidates bandlimited_resampler debug: f32l/48510KHz/2->f32l/44100KHz/2 main debug: using audio filter module "bandlimited_resampler" main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms) main debug: found a filter for the whole conversion main debug: End of audio preroll avcodec debug: IDirectXVideoDecoderService_CreateVideoDecoder succeed avcodec info: Using DXVA2 (ATI Mobility Radeon HD 4300 Series, vendor 4098(ATI), device 38226, revision 0) for hardware decoding. main debug: no usable vout present, spawning one main debug: looking for text renderer module: 2 candidates freetype debug: Building font databases. freetype debug: Took 263000 microseconds freetype debug: Using Arial as font from file C:/Windows/fonts/arial.ttf freetype debug: using fontsize: 2 main debug: using text renderer module "freetype" main debug: TIMER module_need() : 266.000 ms - Total 266.000 ms / 1 intvls (Avg 266.000 ms) main debug: looking for video filter2 module: 18 candidates swscale debug: 32x32 chroma: YUVA -> 16x16 chroma: YUVA with scaling using Bicubic (good quality) main debug: using video filter2 module "swscale" main debug: TIMER module_need() : 1.000 ms - Total 1.000 ms / 1 intvls (Avg 1.000 ms) main debug: looking for video filter2 module: 18 candidates yuvp debug: YUVP to YUVA converter main debug: using video filter2 module "yuvp" main debug: TIMER module_need() : 1.000 ms - Total 1.000 ms / 1 intvls (Avg 1.000 ms) main debug: window size: 720x400 main debug: Deinterlacing available main debug: deinterlace 0, mode blend, is_needed 0 main debug: looking for video output module: 1 candidate vout_wrapper debug: Opening vout display wrapper main debug: looking for vout display module: 8 candidates direct3d debug: creating Vout EventThread direct3d debug: DirectXCreateWindow main debug: looking for vout window hwnd module: 3 candidates qt4 debug: requesting video... qt4 debug: Video was requested 0, 0 main debug: using vout window hwnd module "qt4" main debug: TIMER module_need() : 40.000 ms - Total 40.000 ms / 1 intvls (Avg 40.000 ms) direct3d debug: created video sub-window direct3d debug: Vout EventThread running direct3d debug: disabling screen saver main debug: VoutDisplayEvent 'resize' 736x438 window direct3d warning: trying surface pixel format: YV12 direct3d debug: selected surface pixel format is YV12 direct3d debug: Direct3D scene created successfully direct3d debug: Direct3D device adapter successfully initialized main debug: using vout display module "direct3d" main debug: TIMER module_need() : 145.000 ms - Total 145.000 ms / 1 intvls (Avg 145.000 ms) main debug: using video output module "vout_wrapper" main debug: TIMER module_need() : 145.000 ms - Total 145.000 ms / 1 intvls (Avg 145.000 ms) main debug: got 1 direct buffer(s) main debug: pic render sz 720x400, of (0,0), vsz 720x400, 4cc YV12, sar 1:1, msk r0x0 g0x0 b0x0 main debug: pic in sz 720x400, of (0,0), vsz 720x400, 4cc YV12, sar 1:1, msk r0x0 g0x0 b0x0 main debug: pic out sz 720x400, of (0,0), vsz 720x400, 4cc YV12, sar 1:1, msk r0x0 g0x0 b0x0 main debug: direct render, mapping render pictures 0-23 to system pictures 1-24 main debug: VoutDisplayEvent 'resize' 1366x614 window main debug: End of video preroll main debug: Received first picture freetype debug: using fontsize: 25 main debug: looking for video blending module: 1 candidate blend debug: chroma: YUVA -> YV12 main debug: using video blending module "blend" main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms) main debug: Decoder buffering done in 3592 ms main warning: PTS is out of range (-10000), dropping buffer main debug: Post-processing available main warning: vlc_object_find_name(postproc) is not safe! main warning: output date isn't PTS date, requesting resampling (59121) main warning: buffer is 59158 late, triggering upsampling main debug: auto hidding mouse main debug: incoming request - stopping current input main debug: dying input main debug: control type=0 main debug: control: stopping input main debug: dying input main debug: thread times: real 0m5.646323s, kernel 0m2.964019s, user 0m0.093600s avcodec debug: ffmpeg codec (H264 - MPEG-4 AVC (part 10)) stopped main debug: removing module "avcodec" main debug: killing decoder fourcc `h264', 0 PES in FIFO main debug: [0] 4 0 main debug: [1] 4 0 main debug: [2] 4 0 main debug: [3] 4 0 main debug: [4] 4 0 main debug: [5] 0 0 main debug: [6] 0 0 main debug: [7] 0 0 main debug: [8] 0 0 main debug: [9] 0 0 main debug: [10] 0 0 main debug: [11] 4 0 main debug: [12] 2 0 main debug: [13] 4 0 main debug: [14] 4 0 main debug: [15] 2 0 main debug: [16] 2 0 main debug: [17] 2 0 main debug: [18] 2 0 main debug: [19] 2 0 main debug: [20] 2 0 main debug: [21] 2 0 main debug: [22] 2 0 main debug: [23] 2 0 main debug: saving a free vout main warning: received buffer in the future main debug: thread times: real 0m5.665324s, kernel 0m0.015600s, user 0m0.078000s main debug: removing module "flac" main debug: killing decoder fourcc `flac', 1 PES in FIFO main debug: removing module "audio_format" main debug: removing module "scaletempo" main debug: removing module "bandlimited_resampler" aout_directx debug: closing audio device aout_directx debug: DirectSoundThread exiting main debug: thread ended main debug: thread times: real 0m4.995285s, kernel 0m0.000000s, user 0m0.000000s main debug: removing module "aout_directx" main debug: removing module "audio_format" main debug: removing module "float32_mixer" main debug: releasing aout main debug: thread ended main debug: thread times: real 0m5.809332s, kernel 0m0.000000s, user 0m0.000000s mkv debug: Stopping the UI Hook main debug: removing module "mkv" main debug: removing module "stream_filter_record" main debug: removing module "filesystem" main debug: Program doesn't contain anymore ES main debug: thread ended main debug: dead input main debug: thread times: real 0m5.829333s, kernel 0m0.031200s, user 0m0.171601s main debug: destroying useless vout direct3d debug: Direct3D scene released successfully qt4 debug: IM: Deleting the input main debug: TIMER input launching for 'a.mkv' : 28.000 ms - Total 28.000 ms / 1 intvls (Avg 28.000 ms) direct3d debug: DirectXEventThread terminating direct3d debug: DirectXCloseWindow direct3d debug: WinProc WM_DESTROY qt4 debug: releasing video... qt4 debug: Video is not needed anymore main debug: removing module "qt4" main debug: removing module "direct3d" main debug: removing module "vout_wrapper" main debug: removing module "blend" main debug: removing module "freetype" main debug: removing module "yuvp" main debug: removing module "swscale" qt4 debug: Small
or

Code: Select all

mp4 warning: unknown box type iods (incompletely loaded) mp4 warning: unknown box type btrt (incompletely loaded) mp4 warning: unknown box type gsst (incompletely loaded) mp4 warning: unknown box type gstd (incompletely loaded) mp4 warning: unknown box type gssd (incompletely loaded) mp4 warning: unknown box type gspu (incompletely loaded) mp4 warning: unknown box type gspm (incompletely loaded) mp4 warning: unknown box type gshh (incompletely loaded) mp4 warning: control query 14 unimplemented faad warning: decoded zero sample avcodec info: obtained IDirect3DDeviceManager9 avcodec info: DXVA2CreateVideoService Success! avcodec warning: - Unknown GUID = 4245F676-2bbc-4166-XXXX avcodec warning: - Unknown GUID = 6719B6FB-5cad-4acb-XXXX avcodec warning: - Unknown GUID = CA15D19A-2b48-43d6-XXXX avcodec warning: - Unknown GUID = 5B23D46D-fa5f-4fdc-XXXX avcodec info: Using DXVA2 (ATI Mobility Radeon HD 4300 Series, vendor 4098(ATI), device 38226, revision 0) for hardware decoding. direct3d warning: trying surface pixel format: YV12 main warning: PTS is out of range (-32993), dropping buffer main warning: vlc_object_find_name(postproc) is not safe! main warning: output date isn't PTS date, requesting resampling (61991) main warning: buffer is 62035 late, triggering upsampling main warning: received buffer in the future

Jean-Baptiste Kempf
Site Administrator
Site Administrator
Posts: 37523
Joined: 22 Jul 2005 15:29
VLC version: 4.0.0-git
Operating System: Linux, Windows, Mac
Location: Cone, France
Contact:

Re: How enable GPU decoding?

Postby Jean-Baptiste Kempf » 30 Mar 2011 22:51

What's your graphic driver version?
Jean-Baptiste Kempf
http://www.jbkempf.com/ - http://www.jbkempf.com/blog/category/Videolan
VLC media player developer, VideoLAN President and Sites administrator
If you want an answer to your question, just be specific and precise. Don't use Private Messages.

AliG
New Cone
New Cone
Posts: 5
Joined: 30 Mar 2011 12:50

Re: How enable GPU decoding?

Postby AliG » 31 Mar 2011 15:38

I used to have Catalyst 8.4 (driver 8.6 I think), now I have Catalyst 11.3 (driver 8.831.2-110308)

(Direct3D 7.14.10.0817, OpenGL 6.14.10.10600, Catalyst Control Center 2011.0308.2325.42017)

if there is anything how can I help you to improve GPU acceleration, just tell me :mrgreen:

VLC_help
Mega Cone Master
Mega Cone Master
Posts: 25661
Joined: 13 Sep 2006 14:16

Re: How enable GPU decoding?

Postby VLC_help » 01 Apr 2011 14:29

if there is anything how can I help you to improve GPU acceleration, just tell me
I don't think your card supports any GPU decoding with VLC.

AliG
New Cone
New Cone
Posts: 5
Joined: 30 Mar 2011 12:50

Re: How enable GPU decoding?

Postby AliG » 01 Apr 2011 15:02

is that because VLC is not designed to support this card for some reason? (incompatible drivers/api, just newer cards support)
are there any prerequisites? Only ATi 5xxx and up?

Well, it is not necessary, I will still use VLC ;)
Just MPC-HC does not have any problem, and InternetExplorer9 and FireFox4 can use GPU with this new drivers too.
I know it is not the same, but this cards should be able to manage that ... so if there is any way, how to make it work, it would be cool

Jean-Baptiste Kempf
Site Administrator
Site Administrator
Posts: 37523
Joined: 22 Jul 2005 15:29
VLC version: 4.0.0-git
Operating System: Linux, Windows, Mac
Location: Cone, France
Contact:

Re: How enable GPU decoding?

Postby Jean-Baptiste Kempf » 01 Apr 2011 15:18

4300 should be enough to decode with VLC.
Can you reshow the new logs with 11.3 ?
Jean-Baptiste Kempf
http://www.jbkempf.com/ - http://www.jbkempf.com/blog/category/Videolan
VLC media player developer, VideoLAN President and Sites administrator
If you want an answer to your question, just be specific and precise. Don't use Private Messages.

AliG
New Cone
New Cone
Posts: 5
Joined: 30 Mar 2011 12:50

Re: How enable GPU decoding?

Postby AliG » 01 Apr 2011 17:35

those are the logs with newest drivers :)

Jean-Baptiste Kempf
Site Administrator
Site Administrator
Posts: 37523
Joined: 22 Jul 2005 15:29
VLC version: 4.0.0-git
Operating System: Linux, Windows, Mac
Location: Cone, France
Contact:

Re: How enable GPU decoding?

Postby Jean-Baptiste Kempf » 01 Apr 2011 17:41

Then, it is a bug.
Jean-Baptiste Kempf
http://www.jbkempf.com/ - http://www.jbkempf.com/blog/category/Videolan
VLC media player developer, VideoLAN President and Sites administrator
If you want an answer to your question, just be specific and precise. Don't use Private Messages.

AliG
New Cone
New Cone
Posts: 5
Joined: 30 Mar 2011 12:50

Re: How enable GPU decoding?

Postby AliG » 01 Apr 2011 18:35

it is not :( my fault

I've restarted computer, enabled that again and now it works ... probably the driver was not loaded properly ...

I am really sorry, thanks for your help ... and for anyone, who would need that - driver update should be the fix :idea:

Henke
New Cone
New Cone
Posts: 6
Joined: 26 Jan 2011 21:09

Re: How enable GPU decoding?

Postby Henke » 11 Apr 2011 00:15

Thank you for the feature.

I was experiencing some red line appearing from time to time before i enabled GPU acceleration.
VLC never had a problem rendering HD files for me with or without GPU acceleration, but this solved the red line problem :)
I use Q9550 and Asus/Nvidia 9800GTX on a Biostar T-Power I45 MTB.

Hallowed is the VLC.

Jean-Baptiste Kempf
Site Administrator
Site Administrator
Posts: 37523
Joined: 22 Jul 2005 15:29
VLC version: 4.0.0-git
Operating System: Linux, Windows, Mac
Location: Cone, France
Contact:

Re: How enable GPU decoding?

Postby Jean-Baptiste Kempf » 09 May 2011 13:27

What screenshot? :D

Anyway, it is experimental, since it doesn't work in all configurations.
Jean-Baptiste Kempf
http://www.jbkempf.com/ - http://www.jbkempf.com/blog/category/Videolan
VLC media player developer, VideoLAN President and Sites administrator
If you want an answer to your question, just be specific and precise. Don't use Private Messages.

bugreporter
Blank Cone
Blank Cone
Posts: 10
Joined: 29 May 2011 00:45

Re: How enable GPU decoding?

Postby bugreporter » 30 May 2011 21:08

I think it would be good for VLC to implement GPU status processing. The log file currently doesn't show if decoding fails.

Also, it would be nice if the renderer would use DXVA as well (ProcessBlt).

bugreporter
Blank Cone
Blank Cone
Posts: 10
Joined: 29 May 2011 00:45

Re: How enable GPU decoding?

Postby bugreporter » 30 May 2011 21:12

Irrelevant of whether it uses the code the VLC developers have put inside FFMpeg, XBMC for Windows runs the high bitrate H264 content I have better, especially the well known killa.sampla. My CPU definitely isn't capable of playing it smoothly so both are using hardware decoding and XBMC handles it far better. Completely smooth whereas there's a fair few judders with VLC.

I'm not slagging off VLC, I love it, it's definitely one of the most useful pieces of software I've ever used across both Linux and Windows.
Yeah, that's because XBMC does also the rendering with DXVA. VLC only does decoding.

VLC_help
Mega Cone Master
Mega Cone Master
Posts: 25661
Joined: 13 Sep 2006 14:16

Re: How enable GPU decoding?

Postby VLC_help » 06 Jun 2011 17:34

No. Only GPU decoding is supported. And it isn't on by default in browser plugins (and since it isn't a safe option, you can't enable it easily).

webrao
New Cone
New Cone
Posts: 1
Joined: 18 Jul 2011 18:11

Re: How enable GPU decoding?

Postby webrao » 18 Jul 2011 18:17

And that is why it isn't on by default

Faenz888
New Cone
New Cone
Posts: 1
Joined: 28 Sep 2011 23:22

Re: How enable GPU decoding?

Postby Faenz888 » 28 Sep 2011 23:34

Guys i'm sorry to bump this thread, but i would just like to ask if there is any method to let my Ati video card to apply the effects listed on the Catalyst program at the video (deblocking, gamma, saturation, so postprocessing in general)? The gpu acceleration is awesome but it really seems that vlc (or the drivers) are not capable of apply the postprocessing. I read the thread and i know that some things vlc's not capable where other player are, trading off this capability with other x^n problem which are strangers in vlc since early versions . Vlc and the drivers are the latest version and the videos are h264 (mkv is the container). Thanks for help and sorry for any MASSIVE amount of ignorance.

VLC_help
Mega Cone Master
Mega Cone Master
Posts: 25661
Joined: 13 Sep 2006 14:16

Re: How enable GPU decoding?

Postby VLC_help » 04 Oct 2011 15:33

Faenz888: I would guess that requires some additional code or isn't supported because of how VLC processes the DXVA.

rarkenin
Blank Cone
Blank Cone
Posts: 16
Joined: 28 Dec 2011 01:01
Operating System: Windows xp x64
Location: In a mess of traffic cones at a construction site

Re: How enable GPU decoding?

Postby rarkenin » 28 Dec 2011 13:38

My GPU option is not enabled in preferences (greyed out, can not be clicked).
And player stutters while playing a high bit rated MKV file.

VLC Player version 1.1.15
Graphic Card: Radeon HD 5550
GPU is only possible on Vista and 7
I am running XP x64(Which is very similar to Windows Server 2003) and have the checkbox available. I also see less dropped frames in the same file by a factor of about 10 after turning on GPU acceleration.

VLC_help
Mega Cone Master
Mega Cone Master
Posts: 25661
Joined: 13 Sep 2006 14:16

Re: How enable GPU decoding?

Postby VLC_help » 28 Dec 2011 16:04

Could you share your VLC messages?

rarkenin
Blank Cone
Blank Cone
Posts: 16
Joined: 28 Dec 2011 01:01
Operating System: Windows xp x64
Location: In a mess of traffic cones at a construction site

Re: How enable GPU decoding?

Postby rarkenin » 28 Dec 2011 16:12

Who, me?

BloodZeed
Blank Cone
Blank Cone
Posts: 79
Joined: 28 Dec 2011 16:54

Re: How enable GPU decoding?

Postby BloodZeed » 28 Dec 2011 17:11

when i select gpu encoding it lags like hell i have ati 5850 latest ati drivers and latest vlc installed any ideas?

VLC_help
Mega Cone Master
Mega Cone Master
Posts: 25661
Joined: 13 Sep 2006 14:16

Re: How enable GPU decoding?

Postby VLC_help » 29 Dec 2011 15:44

rarkenin: Yes, you. (Tools -> Messages, set Verbosity to 2, then start playback)

BloodZeed: same thing, could you share your messages?

richyisrude
New Cone
New Cone
Posts: 1
Joined: 17 Dec 2011 04:09
Contact:

Re: How enable GPU decoding?

Postby richyisrude » 05 Jan 2012 10:51

thanks!

xboxpcpro
New Cone
New Cone
Posts: 1
Joined: 12 Jan 2012 22:53

Re: How enable GPU decoding?

Postby xboxpcpro » 12 Jan 2012 23:17

Thank you for the feature.

I was experiencing some red line appearing from time to time before i enabled GPU acceleration.
VLC never had a problem rendering HD files for me with or without GPU acceleration, but this solved the red line problem :)
I use Q9550 and Asus/Nvidia 9800GTX on a Biostar T-Power I45 MTB.

Hallowed is the VLC.
i have been trying to sort out some lines in streams for ages but I just read in http://wiki.videolan.org/VLC_GPU_Decoding that XP is not supported guess its time to upgrade my pc to windows 7 !

jimsohan
New Cone
New Cone
Posts: 1
Joined: 24 Jan 2012 06:56

Re: How enable GPU decoding?

Postby jimsohan » 24 Jan 2012 07:09

Video decoding processes which could be accelerated

XvMC for Linux could possibly be extended in the future to support the same processes:

Motion compensation (mo comp)
Inverse Discrete Cosine Transform (iDCT)
Inverse Telecine 3:2 and 2:2 pull-down correction
Inverse modified discrete cosine transform (iMDCT)
In-loop deblocking filter
Intra-frame prediction
Inverse quantization (IQ)
Variable-Length Decoding (VLD), more commonly known as slice level acceleration
Spatial-Temporal De-Interlacing, (plus automatic interlace/progressive source detection)
Bitstream processing (CAVLC/CABAC)
CABAC entropy decoding is probably not possible to offload on GPU via pixel shader.
NVIDIA and ATI/AMD GPUs use dedicated hardware blocks for entropy decoding.


Return to “VLC media player for Windows Troubleshooting”

Who is online

Users browsing this forum: No registered users and 27 guests