I try to open mms urls in Videolan and it play a few seconds (no more than 5 sec) of video and then freezes. I thought at first it had paused for buffering... but no. It never starts playing again. The only way to see the video again is to press stop, and play, so Videolan in fact re-connects to the server... and plays a few more seconds.
Its weird, cuz I am unable to play streaming video on my WMP too!! In fact, Windows Media Player wont even open the video... it simply gives me an error message that it cannot play the video!
Can´t play streaming video!!!
Forum rules
Please post only Windows specific questions in this forum category. If you don't know where to post, please read the different forums' rules. Thanks.
Please post only Windows specific questions in this forum category. If you don't know where to post, please read the different forums' rules. Thanks.
Considering WMP is totally independent from VLC suggests other problems in your system or connection to the Internet.
Try doing a DirectX diagnostic.
Try doing Internet speed tests.
http://www.dslreports.com/stest
Try doing a DirectX diagnostic.
Try doing Internet speed tests.
http://www.dslreports.com/stest
Why are you so sure it's not a Internet speed problem?
Really this is quite common and revolves around, method of streaming, bitrate, resolution of the file and transcodeing method. Even congestion on the network plays a part here.
Considering that you are having problems in general (any player) the system does seem more likely in your case.
Really this is quite common and revolves around, method of streaming, bitrate, resolution of the file and transcodeing method. Even congestion on the network plays a part here.
Considering that you are having problems in general (any player) the system does seem more likely in your case.
this is what I get:View -> Messages
then open stream. Does it complain something after streaming stops?
Have you tried 0.8.6-test2 ?
...
main debug: using audio filter module "bandlimited_resampler"
main debug: found a filter for the whole conversion
access_mms warning: cannot fill buffer
access_mms warning: cannot receive header (1/10)
main warning: buffer is 80000 in advance, triggering downsampling
access_mms warning: cannot fill buffer
access_mms warning: cannot receive header (1/10)
main warning: computed PTS is out of range (2563875), clearing out
main warning: timing screwed, stopping resampling
main warning: PTS is out of range (2485000), dropping buffer
main warning: output PTS is out of range (2603000), clearing out
main warning: PTS is out of range (2357000), dropping buffer
main warning: PTS is out of range (2229000), dropping buffer
main warning: PTS is out of range (2101000), dropping buffer
main warning: late picture skipped (349000)
main warning: late picture skipped (325000)
main warning: late picture skipped (285000)
main warning: late picture skipped (245000)
main warning: late picture skipped (205000)
main warning: late picture skipped (180000)
...
basically it keeps saying the same messages until I stop.
Where can I download 0.8.6 v2??
I only found 0.8.5 to download, and its the one Ive been using all the time.
Is it all streaming sites, or just certain ones? If the source is overloaded, nothing you can do will fix it (except streaming to a file and watching it later)
Some good solid streams:
CN8
Research channel
Would give the URL, but I can't watch TV at work.
tried CN8. Same thing. Played 3 seconds. Stoped for a long time, than video closed.
btw, dont know if this info is helpful or not, but I went to http://www.novell.com/test/port_tests.html and these were my results:
********************
WIN 9,0,16,0
RMTP Default: Success 4s
RMTP Port 1935: Success 1.4s
RMTP Port 80: Success 1.6s
RMTP Port 443: Success 1.6s
RMTPT (Tunneling) Default: Success 3.3s
RMTPT (Tunneling) Port 80: Success 5.4s
RMTPT (Tunneling) Port 443: Failed 2.6s
RMTPT (Tunneling) Port 1935: Failed 2s
*****************
********************
WIN 9,0,16,0
RMTP Default: Success 4s
RMTP Port 1935: Success 1.4s
RMTP Port 80: Success 1.6s
RMTP Port 443: Success 1.6s
RMTPT (Tunneling) Default: Success 3.3s
RMTPT (Tunneling) Port 80: Success 5.4s
RMTPT (Tunneling) Port 443: Failed 2.6s
RMTPT (Tunneling) Port 1935: Failed 2s
*****************
-
The DJ
- Cone Master
- Posts: 5987
- Joined: 22 Nov 2003 21:52
- VLC version: git
- Operating System: Mac OS X
- Location: Enschede, Holland
- Contact:
Yes, you are behind a NAT. (You can thank the ADSL industry for totally breaking the internet).
During streaming, data needs to be exchanged over certain UDP ports. Many ADSL/Cable equipment with NAT enabled doesn't handle that very well.
Your options.
1: Get a better ADSL/NAT box
2: Do your own routing
During streaming, data needs to be exchanged over certain UDP ports. Many ADSL/Cable equipment with NAT enabled doesn't handle that very well.
Your options.
1: Get a better ADSL/NAT box
2: Do your own routing
Don't use PMs for support questions.
@The DJ I'm not aware of any home type router (that does port forwarding) that will increment the port as there is no mechanism to do this. The only thing I am aware of is UpNP devices, but VLC would need to support this automatically (perhaps as an option) in order for it to work. I have seen several programs that do change the ports of a UpNP router through the UpNP command set. They even close the ports when the program closes.
So in my opinion, it would be smart to either stop incrementing the port, provide an option for the user and or implement the UpNP command set and also provide options for this function.
@aceshigh NAT is Network Address Translation. This is a part of your router (if you have one). An ADSL modem is the type your phone company provides. These types of modems are up or down and not both at the same time, as such there is no sync between the up and down flow of data. These types of modems also suffer from interruptions in streaming data to do a up or a down depending on the type of streaming.
So in my opinion, it would be smart to either stop incrementing the port, provide an option for the user and or implement the UpNP command set and also provide options for this function.
@aceshigh NAT is Network Address Translation. This is a part of your router (if you have one). An ADSL modem is the type your phone company provides. These types of modems are up or down and not both at the same time, as such there is no sync between the up and down flow of data. These types of modems also suffer from interruptions in streaming data to do a up or a down depending on the type of streaming.
@The DJ I'm not aware of any home type router (that does port forwarding) that will increment the port as there is no mechanism to do this. The only thing I am aware of is UpNP devices, but VLC would need to support this automatically (perhaps as an option) in order for it to work. I have seen several programs that do change the ports of a UpNP router through the UpNP command set. They even close the ports when the program closes.
So in my opinion, it would be smart to either stop incrementing the port, provide an option for the user and or implement the UpNP command set and also provide options for this function.
@aceshigh NAT is Network Address Translation. This is a part of your router (if you have one). An ADSL modem is the type your phone company provides. These types of modems are up or down and not both at the same time, as such there is no sync between the up and down flow of data. These types of modems also suffer from interruptions in streaming data to do a up or a down depending on the type of streaming.
Well, but doesnt EVERYONE has a modem router? Mine is a Speedstream 4200. I know how to port forward in it. Doesnt it helps? I mean, I can port forward for e-mule for example
Everybody I know who have ADSL have routers and they can play streaming video. Why cant I?
In fact, I could play streaming video with this very same router not so long ago. I guess it stoped playing in my last Windows install or when I installed some service pack.
The more common problems with a new installation of Windows XP are:
1. Missing AGP or PCIe drivers. These are specific to your motherboard chipset and required for your video card to function properly.
2. Update your video and audio card drivers after installing SP2 or DirectX 9c as recommended by Microsoft.
3. Update DirectX runtime. This is updated every few months by Microsoft and is not automatic.
Do not install WMP 11 final as there are lots of problems associated for many players. Microsoft says it's looking into the issues. It has been about a month now with no new updates available.
1. Missing AGP or PCIe drivers. These are specific to your motherboard chipset and required for your video card to function properly.
2. Update your video and audio card drivers after installing SP2 or DirectX 9c as recommended by Microsoft.
3. Update DirectX runtime. This is updated every few months by Microsoft and is not automatic.
Do not install WMP 11 final as there are lots of problems associated for many players. Microsoft says it's looking into the issues. It has been about a month now with no new updates available.
never installed WMP 10.The more common problems with a new installation of Windows XP are:
1. Missing AGP or PCIe drivers. These are specific to your motherboard chipset and required for your video card to function properly.
why would only STREAMING video not work?
already done.2. Update your video and audio card drivers after installing SP2 or DirectX 9c as recommended by Microsoft.
3. Update DirectX runtime. This is updated every few months by Microsoft and is not automatic.
Do not install WMP 11 final as there are lots of problems associated for many players. Microsoft says it's looking into the issues. It has been about a month now with no new updates available.
Return to “VLC media player for Windows Troubleshooting”
Who is online
Users browsing this forum: Bing [Bot] and 30 guests