The VideoLAN Forums

Discussion and support for VLC media player and friends

Skip to content

M-Audio Digital Out (A/52 )in Panther doesn't work

For questions and discussion that is NOT (I repeat NOT) specific to a certain Operating System.
Post Reply
Scott

M-Audio Digital Out (A/52 )in Panther doesn't work

Postby Scott » 25 Nov 2003 06:21

Love your program. Great work.

I have been copying my DVD's to my PowerMac to make it a video server (I already use it as my music server). I can play the DVDs directly from the disk using VideoLAN and get 5.1 digital output fine using M-Audio Revolution sound card. However when I copy the DVD to my hard disk and play it, I only get the stereo PCM output to work on the digital output of the card. I get the following message when I switch the output in the in the menu/audio/audiodevice/1:Revolution Digital Out (Digital A52): "coreaudio: failed to set buffer size: [nope]"
Top
Ti-maniac
Blank Cone
Blank Cone
Posts: 20
Joined: 25 Nov 2003 15:24

Postby Ti-maniac » 25 Nov 2003 15:31

I get the same message on my M-audio Sonica. I emailed M-audio and they indicated that it is unknown if they are coming out with an upgrade for Panther.
Top
Scott

M-Audio Digital Out (A/52 )in Panther doesn't work

Postby Scott » 26 Nov 2003 02:31

They posted an update today, coincidently, but it only works with DVD Player. They specifically state that they don't support VideoLan. I have not been able to get DVD Player to work with a copy of a DVD on my hard drive whereas VideoLan works beautifully expect for the AC3 digital out. My preference is the VideoLan Player. If it works with the DVD Player it should work with VideoLan (I would think).
Top
philipp

Postby philipp » 26 Nov 2003 22:14

I also get the same error when I try to play a DVD over sonica in vlc 0.6.2!

On http://www.m-audio.de you can find a driver for sonica that works pretty good in panther but only with the AC3Edition of vlc (you can get it also on http://www.m-audio.de).
Top
Ti-maniac
Blank Cone
Blank Cone
Posts: 20
Joined: 25 Nov 2003 15:24

Postby Ti-maniac » 28 Nov 2003 21:48

VCL 0.7.0 beta does not appear to address this issue. Any ideas, pref changes?
Top
The DJ
Cone Master
Cone Master
Posts: 5987
Joined: 22 Nov 2003 21:52
VLC version: git
Operating System: Mac OS X
Location: Enschede, Holland
Contact:
Contact The DJ

Postby The DJ » 29 Nov 2003 00:46

Try this:
viewtopic.php?t=41
Don't use PMs for support questions.
Top
Scott

M-Audio Digital Out (A/52 )in Panther doesn't work

Postby Scott » 29 Nov 2003 07:36

DJ- I tried this before I posted my problem. It didn't fix it. Still get the same error msg I posted earlier.
Top
The DJ
Cone Master
Cone Master
Posts: 5987
Joined: 22 Nov 2003 21:52
VLC version: git
Operating System: Mac OS X
Location: Enschede, Holland
Contact:
Contact The DJ

Postby The DJ » 29 Nov 2003 23:32

Could you post a complete log from the messages window?
Just start playing the file, pause it immediatly after changing to digital output. open the messages window and copy the contents.
Don't use PMs for support questions.
Top
Guest

Postby Guest » 30 Nov 2003 00:48

Hi DJ,
I tried this before. The Sonica is audio device 1: Digital (A/52). I set the preferece in coreaudio to 1. I obtain the following:

coreaudio: failed to set buffer size: [nope]

and then shortly thereafter I get an "unexpectedly quit" error.

I might add that I always get an "unexpectedly quit" error when I use "Open Disk". I am able to open the disk if I select "Open File" and open the Video_TS folder.
Top
Scott

Message Log Contents

Postby Scott » 30 Nov 2003 05:48

Here you go DJ-

coreaudio debug: supported format: [96000][lpcm][4][8][1][8][2][24]
coreaudio debug: supported format: [176400][lpcm][4][8][1][8][2][24]
coreaudio debug: supported format: [192000][lpcm][4][8][1][8][2][24]
coreaudio debug: supported format: [48000][cac3][12][6144][1536][0][2][16]
coreaudio debug: device [2] has name [Revolution Analog 7.1 Out]
coreaudio debug: device [2] has [1] streams
coreaudio debug: supported format: [8000][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [9600][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [11025][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [12000][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [16000][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [22050][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [24000][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [32000][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [44100][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [48000][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [88200][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [96000][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [176400][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [192000][lpcm][4][32][1][32][8][24]
coreaudio debug: device [3] has name [Revolution Analog 1/2 In]
coreaudio debug: device [3] has [0] streams
coreaudio debug: getting device [0]
coreaudio debug: stream format: [44100][lpcm][30][4][1][4][2][16]
coreaudio debug: setting format: [44100][lpcm][30][4][1][4][2][16]
coreaudio debug: using format: [44100][lpcm][11][8][1][8][2][32]
coreaudio debug: device buffer size: [4096]
main debug: using audio output module "coreaudio"
main debug: output 'fl32' 44100 Hz Stereo frame=1 samples/8 bytes
main debug: mixer 'fl32' 44100 Hz Stereo frame=1 samples/8 bytes
main debug: no need for any filter
main debug: looking for audio mixer module
main debug: probing 3 candidates
main debug: using audio mixer module "float32_mixer"
main debug: input 'a52 ' 48000 Hz 3F2R/LFE frame=1536 samples/1792 bytes
main debug: filter(s) 'a52 '->'fl32' 48000 Hz->48000 Hz 3F2R/LFE->Stereo
main debug: looking for audio filter module
main debug: probing 22 candidates
main debug: using audio filter module "a52tofloat32"
main debug: found a filter for the whole conversion
main debug: filter(s) 'fl32'->'fl32' 52800 Hz->44100 Hz Stereo->Stereo
main debug: looking for audio filter module
main debug: probing 22 candidates
main debug: looking for audio filter module
main debug: probing 22 candidates
main debug: using audio filter module "ugly_resampler"
main debug: using audio filter module "coreaudio_resampler"
main debug: found a filter for the whole conversion
main debug: audio output is starving (226990), playing silence
coreaudio_resampler warning: AudioConverterConvertBuffer failed: [szMê] (11296:0)
main debug: decoded 108/108 pictures
main debug: decoded 108/108 pictures
main debug: toggling pause
main debug: unlocking module "a52tofloat32"
main debug: unlocking module "ugly_resampler"
main debug: unlocking module "coreaudio_resampler"
main debug: unlocking module "float32_mixer"
coreaudio debug: reverting to format: [44100][lpcm][30][4][1][4][2][16]
main debug: unlocking module "coreaudio"
main debug: looking for audio output module
main debug: probing 3 candidates
coreaudio debug: system has [4] device(s)
coreaudio debug: device [0] has name [Built-in Audio]
coreaudio debug: device [0] has [1] streams
coreaudio debug: supported format: [44100][lpcm][30][4][1][4][2][16]
coreaudio debug: device [1] has name [Revolution Digital Out]
coreaudio debug: device [1] has [1] streams
coreaudio debug: supported format: [8000][lpcm][4][8][1][8][2][24]
coreaudio debug: supported format: [9600][lpcm][4][8][1][8][2][24]
coreaudio debug: supported format: [11025][lpcm][4][8][1][8][2][24]
coreaudio debug: supported format: [12000][lpcm][4][8][1][8][2][24]
coreaudio debug: supported format: [16000][lpcm][4][8][1][8][2][24]
coreaudio debug: supported format: [22050][lpcm][4][8][1][8][2][24]
coreaudio debug: supported format: [24000][lpcm][4][8][1][8][2][24]
coreaudio debug: supported format: [32000][lpcm][4][8][1][8][2][24]
coreaudio debug: supported format: [44100][lpcm][4][8][1][8][2][24]
coreaudio debug: supported format: [48000][lpcm][4][8][1][8][2][24]
coreaudio debug: supported format: [88200][lpcm][4][8][1][8][2][24]
coreaudio debug: supported format: [96000][lpcm][4][8][1][8][2][24]
coreaudio debug: supported format: [176400][lpcm][4][8][1][8][2][24]
coreaudio debug: supported format: [192000][lpcm][4][8][1][8][2][24]
coreaudio debug: supported format: [48000][cac3][12][6144][1536][0][2][16]
coreaudio debug: device [2] has name [Revolution Analog 7.1 Out]
coreaudio debug: device [2] has [1] streams
coreaudio debug: supported format: [8000][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [9600][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [11025][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [12000][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [16000][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [22050][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [24000][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [32000][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [44100][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [48000][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [88200][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [96000][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [176400][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [192000][lpcm][4][32][1][32][8][24]
coreaudio debug: device [3] has name [Revolution Analog 1/2 In]
coreaudio debug: device [3] has [0] streams
coreaudio debug: getting device [0]
coreaudio debug: stream format: [44100][lpcm][30][4][1][4][2][16]
coreaudio debug: setting format: [44100][lpcm][30][4][1][4][2][16]
coreaudio debug: using format: [44100][lpcm][11][8][1][8][2][32]
coreaudio debug: device buffer size: [4096]
main debug: using audio output module "coreaudio"
main debug: output 'fl32' 44100 Hz Stereo frame=1 samples/8 bytes
main debug: mixer 'fl32' 44100 Hz Stereo frame=1 samples/8 bytes
main debug: no need for any filter
main debug: looking for audio mixer module
main debug: probing 3 candidates
main debug: using audio mixer module "float32_mixer"
main debug: input 'a52 ' 48000 Hz 3F2R/LFE frame=1536 samples/1792 bytes
main debug: filter(s) 'a52 '->'fl32' 48000 Hz->48000 Hz 3F2R/LFE->Stereo
main debug: looking for audio filter module
main debug: probing 22 candidates
main debug: using audio filter module "a52tofloat32"
main debug: found a filter for the whole conversion
main debug: filter(s) 'fl32'->'fl32' 52800 Hz->44100 Hz Stereo->Stereo
main debug: looking for audio filter module
main debug: probing 22 candidates
main debug: looking for audio filter module
main debug: probing 22 candidates
main debug: using audio filter module "ugly_resampler"
main debug: using audio filter module "coreaudio_resampler"
main debug: found a filter for the whole conversion
main debug: playing at normal rate
main warning: PTS is out of range (24124973), dropping buffer
main debug: audio output is starving (324343), playing silence
main warning: late picture skipped (23954291)
coreaudio_resampler warning: AudioConverterConvertBuffer failed: [szMê] (11296:0)
main warning: late picture skipped (24024491)
main warning: backward_pts != current_pts (-24456584)
main debug: decoded 106/108 pictures
main debug: decoded 108/108 pictures
main debug: decoded 108/108 pictures
main debug: unlocking module "a52tofloat32"
main debug: unlocking module "ugly_resampler"
main debug: unlocking module "coreaudio_resampler"
main debug: unlocking module "float32_mixer"
coreaudio debug: reverting to format: [44100][lpcm][30][4][1][4][2][16]
main debug: unlocking module "coreaudio"
main debug: looking for audio output module
main debug: probing 3 candidates
coreaudio debug: system has [4] device(s)
coreaudio debug: device [0] has name [Built-in Audio]
coreaudio debug: device [0] has [1] streams
coreaudio debug: supported format: [44100][lpcm][30][4][1][4][2][16]
coreaudio debug: device [1] has name [Revolution Digital Out]
coreaudio debug: device [1] has [1] streams
coreaudio debug: supported format: [8000][lpcm][4][8][1][8][2][24]
coreaudio debug: supported format: [9600][lpcm][4][8][1][8][2][24]
coreaudio debug: supported format: [11025][lpcm][4][8][1][8][2][24]
coreaudio debug: supported format: [12000][lpcm][4][8][1][8][2][24]
coreaudio debug: supported format: [16000][lpcm][4][8][1][8][2][24]
coreaudio debug: supported format: [22050][lpcm][4][8][1][8][2][24]
coreaudio debug: supported format: [24000][lpcm][4][8][1][8][2][24]
coreaudio debug: supported format: [32000][lpcm][4][8][1][8][2][24]
coreaudio debug: supported format: [44100][lpcm][4][8][1][8][2][24]
coreaudio debug: supported format: [48000][lpcm][4][8][1][8][2][24]
coreaudio debug: supported format: [88200][lpcm][4][8][1][8][2][24]
coreaudio debug: supported format: [96000][lpcm][4][8][1][8][2][24]
coreaudio debug: supported format: [176400][lpcm][4][8][1][8][2][24]
coreaudio debug: supported format: [192000][lpcm][4][8][1][8][2][24]
coreaudio debug: supported format: [48000][cac3][12][6144][1536][0][2][16]
coreaudio debug: device [2] has name [Revolution Analog 7.1 Out]
coreaudio debug: device [2] has [1] streams
coreaudio debug: supported format: [8000][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [9600][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [11025][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [12000][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [16000][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [22050][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [24000][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [32000][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [44100][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [48000][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [88200][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [96000][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [176400][lpcm][4][32][1][32][8][24]
coreaudio debug: supported format: [192000][lpcm][4][32][1][32][8][24]
coreaudio debug: device [3] has name [Revolution Analog 1/2 In]
coreaudio debug: device [3] has [0] streams
coreaudio debug: getting device [1]
coreaudio debug: stream format: [44100][lpcm][4][8][1][8][2][24]
coreaudio debug: setting format: [48000][cac3][12][6144][1536][0][2][16]
coreaudio debug: using format: [48000][cac3][12][6144][1536][0][2][16]
coreaudio debug: device buffer size: [0]
coreaudio error: failed to set buffer size: [nope]
coreaudio debug: reverting to format: [44100][lpcm][4][8][1][8][2][24]
main debug: using audio output module "dummy"
main debug: output 'a52 ' 48000 Hz 3F2R/LFE frame=1536 samples/1792 bytes
main debug: mixer 'a52 ' 48000 Hz 3F2R/LFE frame=1536 samples/1792 bytes
main debug: no need for any filter
main debug: looking for audio mixer module
main debug: probing 3 candidates
main debug: using audio mixer module "spdif_mixer"
main debug: input 'a52 ' 48000 Hz 3F2R/LFE frame=1536 samples/1792 bytes
main debug: no need for any filter
main debug: decoded 108/108 pictures
Top
The DJ
Cone Master
Cone Master
Posts: 5987
Joined: 22 Nov 2003 21:52
VLC version: git
Operating System: Mac OS X
Location: Enschede, Holland
Contact:
Contact The DJ

Postby The DJ » 30 Nov 2003 23:15

One more reason for me to change how this works.
When i have time i'll get on it.
Don't use PMs for support questions.
Top
Scott

I take you know what I posted means?

Postby Scott » 01 Dec 2003 05:48

I look forward to seeing what you come up with. I really like your program.
Top
goldplata

Since Quicktime 6.4

Postby goldplata » 02 Dec 2003 11:24

We all relay on you!
The strange thing is that it all works ok, till Apple released their famous Quicktime 6.4 update...
Your App is so nice! The SONICA users we NEED this thing to work!!
Top
Guest

Postby Guest » 06 Dec 2003 03:14

I am also a new SONICA user on Mac OSX 10.3.1

I am getting the exact same error message when I run DVD's with 5.1 surround sound

I am currently using the M-Audio VLC Edition (v0.4.3) for my dvds. and it plays 5.1 sound perfectly but it is a pretty antique app when it comes to the VLC features nowadays.

VLC is an amazing app, I hope you's can fix this audio bug soon :)

This is my error message with the M-Audio Sonica:

"coreaudio debug: system has [2] device(s)
coreaudio debug: device [0] has name [Built-in Audio]
coreaudio debug: device [0] has [1] streams
coreaudio debug: supported format: [44100][lpcm][30][4][1][4][2][16]
coreaudio debug: device [1] has name [Sonica]
coreaudio debug: device [1] has [1] streams
coreaudio debug: supported format: [8000][lpcm][12][4][1][4][2][16]
coreaudio debug: supported format: [11025][lpcm][12][4][1][4][2][16]
coreaudio debug: supported format: [12000][lpcm][12][4][1][4][2][16]
coreaudio debug: supported format: [22050][lpcm][12][4][1][4][2][16]
coreaudio debug: supported format: [24000][lpcm][12][4][1][4][2][16]
coreaudio debug: supported format: [32000][lpcm][12][4][1][4][2][16]
coreaudio debug: supported format: [44100][lpcm][12][4][1][4][2][16]
coreaudio debug: supported format: [48000][lpcm][12][4][1][4][2][16]
coreaudio debug: supported format: [88200][lpcm][12][4][1][4][2][16]
coreaudio debug: supported format: [96000][lpcm][12][4][1][4][2][16]
coreaudio debug: supported format: [8000][lpcm][12][6][1][6][2][24]
coreaudio debug: supported format: [11025][lpcm][12][6][1][6][2][24]
coreaudio debug: supported format: [12000][lpcm][12][6][1][6][2][24]
coreaudio debug: supported format: [22050][lpcm][12][6][1][6][2][24]
coreaudio debug: supported format: [24000][lpcm][12][6][1][6][2][24]
coreaudio debug: supported format: [32000][lpcm][12][6][1][6][2][24]
coreaudio debug: supported format: [44100][lpcm][12][6][1][6][2][24]
coreaudio debug: supported format: [48000][lpcm][12][6][1][6][2][24]
coreaudio debug: supported format: [88200][lpcm][12][6][1][6][2][24]
coreaudio debug: supported format: [96000][lpcm][12][6][1][6][2][24]
coreaudio debug: supported format: [48000][cac3][12][6144][1536][0][2][16]
coreaudio debug: getting device [1]
coreaudio debug: stream format: [44100][lpcm][12][4][1][4][2][16]
coreaudio debug: setting format: [48000][cac3][12][6144][1536][0][2][16]
coreaudio debug: using format: [48000][cac3][12][6144][1536][0][2][16]
coreaudio debug: device buffer size: [0]
coreaudio error: failed to set buffer size: [nope]
coreaudio debug: reverting to format: [44100][lpcm][12][4][1][4][2][16]"

Thanks VLC!
Top
Guest

Postby Guest » 06 Dec 2003 03:51

Ohya forgot to mention this also happens in VLC 7 Beta Test
Top
Ti-maniac
Blank Cone
Blank Cone
Posts: 20
Joined: 25 Nov 2003 15:24

Postby Ti-maniac » 06 Dec 2003 07:25

I am currently using the M-Audio VLC Edition (v0.4.3) for my dvds. and it plays 5.1 sound perfectly but it is a pretty antique app when it comes to the VLC features nowadays.
I am unable to get VLC 0.4.3 to work with OSX10.3.1. Are you sure?
Top
Guest

Postby Guest » 06 Dec 2003 09:03

I am currently using the M-Audio VLC Edition (v0.4.3) for my dvds. and it plays 5.1 sound perfectly but it is a pretty antique app when it comes to the VLC features nowadays.
I am unable to get VLC 0.4.3 to work with OSX10.3.1. Are you sure?
Yes I just loaded it today and watched a couple dvd's. My 5.1 decoder with my speakers automatically detects the Dolby Digital and uses that format with VLC M-Audio edition, it does not work with any other version of VLC tho, I keep getting that "buffer" error.

10.3.1 is a pretty buggy OS all around, some apps won't work and some do sometimes, very strange.
Top
Guest

Postby Guest » 06 Dec 2003 09:05

Ohya download the M-Audio VLC Edition here:
http://www.m-audio.de/files/vlc_AC3Edition.dmg.sit
Works for me under 10.3.1
Top
Scott

Postby Scott » 08 Dec 2003 06:41

I couldn't get vlc v0.4.3 to work.
Top
Lindi

G5 dual, No audio

Postby Lindi » 10 Dec 2003 21:27

Same Error using G5 (10.3.1) with Logitech z680 sound system, works well with Apple DVD player, with VLC no sound with the same error message.

And than then there is no audio completely throughout the ststem, until restart.

javascript:emoticon(':(')
Top
htmug

Postby htmug » 18 Dec 2003 05:43

we over at htmug.com are also having the same problem with the sonica-
vlc 0.4.3 ac3 edition will output AC3 to sonica but wont play some
of my video codecs.. 0.6.2 still no go. this just confirmed on 10.3.2.
i even tried all released between 0.4.3 and 0.6.2.

you guys need any donations or anything we can do to help get this fixed?
you obviously have the best player on the market right now.

thanks
john
Top
The DJ
Cone Master
Cone Master
Posts: 5987
Joined: 22 Nov 2003 21:52
VLC version: git
Operating System: Mac OS X
Location: Enschede, Holland
Contact:
Contact The DJ

Postby The DJ » 18 Dec 2003 15:01

We need for apple to donate some Documentation on playing multichannel audio via Coreaudio (This is the least documented part of the already not so well documented CoreAudio)

Of course it would also help if i actually had a multichannel setup, but i'm not asking that :)
Don't use PMs for support questions.
Top
Ti-maniac
Blank Cone
Blank Cone
Posts: 20
Joined: 25 Nov 2003 15:24

Postby Ti-maniac » 27 Dec 2003 19:02

I really wish you could obtain that informa†ion from apple. Your test2 works so much better and it would be great to get the audio working as well. Could you describe in some additional detail what you need? I know some people at apple and will try to also ask.
Top
The DJ
Cone Master
Cone Master
Posts: 5987
Joined: 22 Nov 2003 21:52
VLC version: git
Operating System: Mac OS X
Location: Enschede, Holland
Contact:
Contact The DJ

Postby The DJ » 28 Dec 2003 01:36

Documentation on sending multichannel output to multichannel devices. CAC3 and DTS audio playing and device stream selection.

normal stereo etc. is pretty well known (not documented either), but multichannel is completly different and not many people have toyed with it. Since there is no documentation, we don't know the 'correct' way to direct these devices.
Don't use PMs for support questions.
Top
mixminus
New Cone
New Cone
Posts: 2
Joined: 28 Dec 2003 23:57

No 5.1 after quicktime 6.5 upgrade

Postby mixminus » 30 Dec 2003 00:01

I'm getting the same problem that none of the test players resolve. I'm on 10.2.8 Jag mainly using 0.6.2. Everything was fine until i upgraded from QT 6.3 to QT 6.5 and now I get the coreaudio error and no 5.1 sound output via my M-Audio Sonica. I am geting around the problem by using vlc 0.4.3 AC3 but it's not as pretty to look at and has less features.
Can't find out how to revert back to before QT 6.4 as there is no uninstaller for 6.5 that i can find yet.
Here's the report:

main debug: decoded 104/104 pictures
main debug: unselecting ES 0xe0
main debug: thread 50235792 joined (src/input/input_dec.c:151)
main debug: killing decoder for 0xe0, fourcc `mpgv', 9 PES in FIFO
main debug: unlocking module "libmpeg2"
main debug: unselecting ES 0x80bd
main debug: unlocking module "dummy"
main debug: unlocking module "spdif_mixer"
main debug: thread 50166816 joined (src/input/input_dec.c:151)
main debug: killing decoder for 0x80bd, fourcc `a52b', 9 PES in FIFO
main debug: unlocking module "a52"
dvdplay debug: new es 0xe0
dvdplay debug: new es 0x80bd
dvdplay debug: new es 0x20bd
main debug: selecting ES 0xe0
macosx debug: stream has changed, refreshing interface
main debug: looking for decoder module
main debug: probing 16 candidates
main debug: using decoder module "libmpeg2"
main debug: thread 55383888 (decoder) created at priority -47 (src/input/input_dec.c:112)
main debug: selecting ES 0x80bd
main debug: looking for decoder module
main debug: probing 16 candidates
main debug: using decoder module "a52"
main debug: thread 55186656 (decoder) created at priority 37 (src/input/input_dec.c:112)
main debug: selecting ES 0x20bd
main debug: looking for decoder module
main debug: probing 16 candidates
main debug: using decoder module "spudec"
main debug: thread 63122720 (decoder) created at priority -47 (src/input/input_dec.c:112)
libmpeg2 debug: 720x576, aspect 576000, 25.000 fps
spudec debug: trying to gather a 0x49a long subtitle
spudec debug: valid subtitle, size: 720x573, position: 0,2
spudec debug: total size: 0x49a, RLE offsets: 0x2 0x242
main warning: late picture skipped (1072738359216008)
main warning: backward_pts != current_pts (-278961)
main debug: looking for audio output module
main debug: probing 3 candidates
coreaudio debug: system has [2] device(s)
coreaudio debug: device [0] has name [Built-in audio controller]
coreaudio debug: device [0] has [1] streams
coreaudio debug: supported format: [44100][lpcm][30][4][1][4][2][16]
coreaudio debug: device [1] has name [Sonica]
coreaudio debug: device [1] has [1] streams
coreaudio debug: supported format: [8000][lpcm][12][4][1][4][2][16]
coreaudio debug: supported format: [11025][lpcm][12][4][1][4][2][16]
coreaudio debug: supported format: [12000][lpcm][12][4][1][4][2][16]
coreaudio debug: supported format: [22050][lpcm][12][4][1][4][2][16]
coreaudio debug: supported format: [24000][lpcm][12][4][1][4][2][16]
coreaudio debug: supported format: [32000][lpcm][12][4][1][4][2][16]
coreaudio debug: supported format: [44100][lpcm][12][4][1][4][2][16]
coreaudio debug: supported format: [48000][lpcm][12][4][1][4][2][16]
coreaudio debug: supported format: [88200][lpcm][12][4][1][4][2][16]
coreaudio debug: supported format: [96000][lpcm][12][4][1][4][2][16]
coreaudio debug: supported format: [8000][lpcm][12][6][1][6][2][24]
coreaudio debug: supported format: [11025][lpcm][12][6][1][6][2][24]
coreaudio debug: supported format: [12000][lpcm][12][6][1][6][2][24]
coreaudio debug: supported format: [22050][lpcm][12][6][1][6][2][24]
coreaudio debug: supported format: [24000][lpcm][12][6][1][6][2][24]
coreaudio debug: supported format: [32000][lpcm][12][6][1][6][2][24]
coreaudio debug: supported format: [44100][lpcm][12][6][1][6][2][24]
coreaudio debug: supported format: [48000][lpcm][12][6][1][6][2][24]
coreaudio debug: supported format: [88200][lpcm][12][6][1][6][2][24]
coreaudio debug: supported format: [96000][lpcm][12][6][1][6][2][24]
coreaudio debug: supported format: [48000][cac3][12][6144][1536][0][2][16]
coreaudio debug: getting device [1]
coreaudio debug: stream format: [44100][lpcm][12][4][1][4][2][16]
coreaudio debug: setting format: [48000][cac3][12][6144][1536][0][2][16]
coreaudio debug: using format: [48000][cac3][12][6144][1536][0][2][16]
coreaudio debug: device buffer size: [0]
coreaudio error: failed to set buffer size: [nope]
coreaudio debug: reverting to format: [44100][lpcm][12][4][1][4][2][16]
main debug: using audio output module "dummy"
main debug: output 'a52 ' 48000 Hz Stereo frame=1536 samples/768 bytes
main debug: mixer 'a52 ' 48000 Hz Stereo frame=1536 samples/768 bytes
main debug: no need for any filter
main debug: looking for audio mixer module
main debug: probing 3 candidates
main debug: using audio mixer module "spdif_mixer"
main debug: input 'a52 ' 48000 Hz Stereo frame=1536 samples/768 bytes
main debug: no need for any filter
main debug: stream periodicity changed from B[1] to B[2]
macosx debug: stream has changed, refreshing interface
main debug: stream periodicity changed from P[5] to P[4]
main debug: decoded 104/104 pictures
main debug: decoded 104/104 pictures
main debug: unselecting ES 0xe0
main debug: thread 55383888 joined (src/input/input_dec.c:151)
main debug: killing decoder for 0xe0, fourcc `mpgv', 67 PES in FIFO
main debug: unlocking module "libmpeg2"
main debug: unselecting ES 0x80bd
main debug: unlocking module "dummy"
main debug: unlocking module "spdif_mixer"
main debug: thread 55186656 joined (src/input/input_dec.c:151)
main debug: killing decoder for 0x80bd, fourcc `a52b', 9 PES in FIFO
main debug: unlocking module "a52"
main debug: unselecting ES 0x20bd
main debug: thread 63122720 joined (src/input/input_dec.c:151)
main debug: killing decoder for 0x20bd, fourcc `spub', 9 PES in FIFO
main debug: unlocking module "spudec"
dvdplay debug: new es 0xe0
dvdplay debug: new es 0x80bd
dvdplay debug: new es 0x20bd
main debug: selecting ES 0xe0
main debug: looking for decoder module
main debug: probing 16 candidates
main debug: using decoder module "libmpeg2"
main debug: thread 63152256 (decoder) created at priority -47 (src/input/input_dec.c:112)
main debug: selecting ES 0x80bd
main debug: looking for decoder module
main debug: probing 16 candidates
main debug: using decoder module "a52"
main debug: thread 63168752 (decoder) created at priority 37 (src/input/input_dec.c:112)
main debug: selecting ES 0x20bd
main debug: looking for decoder module
main debug: probing 16 candidates
main debug: using decoder module "spudec"
main debug: thread 63189744 (decoder) created at priority -47 (src/input/input_dec.c:112)
macosx debug: stream has changed, refreshing interface
libmpeg2 debug: 720x576, aspect 576000, 25.000 fps
spudec debug: trying to gather a 0xc92 long subtitle
spudec warning: ignoring blank alpha palette
spudec debug: valid subtitle, size: 720x573, position: 0,2
spudec debug: total size: 0xc92, RLE offsets: 0x2 0x640
main warning: late picture skipped (1072738371663840)
main warning: backward_pts != current_pts (-287383)
main debug: looking for audio output module
main debug: probing 3 candidates
coreaudio debug: system has [2] device(s)
coreaudio debug: device [0] has name [Built-in audio controller]
coreaudio debug: device [0] has [1] streams
coreaudio debug: supported format: [44100][lpcm][30][4][1][4][2][16]
coreaudio debug: device [1] has name [Sonica]
coreaudio debug: device [1] has [1] streams
coreaudio debug: supported format: [8000][lpcm][12][4][1][4][2][16]
coreaudio debug: supported format: [11025][lpcm][12][4][1][4][2][16]
coreaudio debug: supported format: [12000][lpcm][12][4][1][4][2][16]
coreaudio debug: supported format: [22050][lpcm][12][4][1][4][2][16]
coreaudio debug: supported format: [24000][lpcm][12][4][1][4][2][16]
coreaudio debug: supported format: [32000][lpcm][12][4][1][4][2][16]
coreaudio debug: supported format: [44100][lpcm][12][4][1][4][2][16]
coreaudio debug: supported format: [48000][lpcm][12][4][1][4][2][16]
coreaudio debug: supported format: [88200][lpcm][12][4][1][4][2][16]
coreaudio debug: supported format: [96000][lpcm][12][4][1][4][2][16]
coreaudio debug: supported format: [8000][lpcm][12][6][1][6][2][24]
coreaudio debug: supported format: [11025][lpcm][12][6][1][6][2][24]
coreaudio debug: supported format: [12000][lpcm][12][6][1][6][2][24]
coreaudio debug: supported format: [22050][lpcm][12][6][1][6][2][24]
coreaudio debug: supported format: [24000][lpcm][12][6][1][6][2][24]
coreaudio debug: supported format: [32000][lpcm][12][6][1][6][2][24]
coreaudio debug: supported format: [44100][lpcm][12][6][1][6][2][24]
coreaudio debug: supported format: [48000][lpcm][12][6][1][6][2][24]
coreaudio debug: supported format: [88200][lpcm][12][6][1][6][2][24]
coreaudio debug: supported format: [96000][lpcm][12][6][1][6][2][24]
coreaudio debug: supported format: [48000][cac3][12][6144][1536][0][2][16]
coreaudio debug: getting device [1]
coreaudio debug: stream format: [44100][lpcm][12][4][1][4][2][16]
coreaudio debug: setting format: [48000][cac3][12][6144][1536][0][2][16]
coreaudio debug: using format: [48000][cac3][12][6144][1536][0][2][16]
coreaudio debug: device buffer size: [0]
coreaudio error: failed to set buffer size: [nope]
coreaudio debug: reverting to format: [44100][lpcm][12][4][1][4][2][16]
main debug: using audio output module "dummy"
main debug: output 'a52 ' 48000 Hz Stereo frame=1536 samples/768 bytes
main debug: mixer 'a52 ' 48000 Hz Stereo frame=1536 samples/768 bytes
main debug: no need for any filter
main debug: looking for audio mixer module
main debug: probing 3 candidates
main debug: using audio mixer module "spdif_mixer"
main debug: input 'a52 ' 48000 Hz Stereo frame=1536 samples/768 bytes
main debug: no need for any filter
main debug: stream periodicity changed from B[1] to B[2]
main debug: stream periodicity changed from P[5] to P[4]
main warning: late picture skipped (3079)
main warning: late picture skipped (95561)
main warning: late picture skipped (55589)
main warning: late picture skipped (15595)
main debug: decoded 101/104 pictures
main debug: decoded 104/104 pictures
main debug: decoded 104/104 pictures
main debug: decoded 104/104 pictures
main debug: decoded 104/104 pictures
main debug: decoded 104/104 pictures
main debug: decoded 104/104 pictures
macosx debug: stream has changed, refreshing interface
libmpeg2 debug: 720x576, aspect 576000, 25.000 fps
spudec debug: trying to gather a 0xc92 long subtitle
main warning: late picture skipped (1072738402059079)
spudec warning: ignoring blank alpha palette
spudec debug: valid subtitle, size: 720x573, position: 0,2
spudec debug: total size: 0xc92, RLE offsets: 0x2 0x640
main warning: backward_pts != current_pts (-285993)
main warning: PTS is out of range (-8862), dropping buffer
main warning: output PTS is out of range (12507), clearing out
main warning: input PTS is out of range (23183), trashing
main warning: computed PTS is out of range (7113), clearing out
main debug: stream periodicity changed from B[1] to B[2]
main debug: stream periodicity changed from P[5] to P[4]
main debug: decoded 104/104 pictures
main debug: decoded 104/104 pictures

Thanks anyway
Top
Post Reply

Return to “General VLC media player Troubleshooting”

Who is online

Users browsing this forum: No registered users and 27 guests

Powered by phpBB® Forum Software © phpBB Limited
GZIP: On