Aquisition Card

Microsoft Windows specific usage questions
Forum rules
Please post only Windows specific questions in this forum category. If you don't know where to post, please read the different forums' rules. Thanks.
komagain

Aquisition Card

Postby komagain » 30 May 2006 23:58

I am looking for an Howto setup channels in VLC
My Tuner Card is recognized "Pinnacle WDM PCTV Video Capture"
My sound Card too
After I don't know how to search Channels (I have only blue screen)
I have tried to setup "Device Properties" and "Tuner properties" with and without "tuner country code" = 33 (France), SECAM_L1, "Réglage automatique" for the Tuner.
But no Image
Any help please the world cup is coming
:P

komagain

Aquisition Card

Postby komagain » 31 May 2006 00:16

now I can see a Channel "Canal +" but I got to enter manually the channel "63"
Is there an autonatic scan ?

Thanks

DJ
Cone Master
Cone Master
Posts: 8206
Joined: 01 Jan 2006 04:30
Location: Koloa, Hawaii USA

Postby DJ » 31 May 2006 00:30

There is NO automatic channel scan. VLC was not intended to be a replacement for your capture cards software.

Many users have found some ingenious methods for doing what they want with VLC.

For example:

You can make a m3u playlist and then switch channel with N and P.

This m3u playlist looks like this when opened in notepad:

#EXTM3U
#EXTINF:-1,Viasat Explorer
#EXTVLCOPT:dshow-tuner-channel=1
dshow://
#EXTINF:-1,SVT 1
#EXTVLCOPT:dshow-tuner-channel=4
dshow://
#EXTINF:-1,Kanal 5
#EXTVLCOPT:dshow-tuner-channel=20
dshow://
#EXTINF:-1,SVT 2
#EXTVLCOPT:dshow-tuner-channel=21
dshow://
#EXTINF:-1,TV 4
#EXTVLCOPT:dshow-tuner-channel=23
dshow://
#EXTINF:-1,TV 3
#EXTVLCOPT:dshow-tuner-channel=25
dshow://
#EXTINF:-1,BBC Prime
#EXTVLCOPT:dshow-tuner-channel=26
dshow://
#EXTINF:-1,Eurosport
#EXTVLCOPT:dshow-tuner-channel=28
dshow://

blaas

channal serch

Postby blaas » 01 Jun 2006 11:24

how can I change or edit the channels frequency ?, in our country (romania) many channals have diferent frequency ......

Can somebody help me?

DJ
Cone Master
Cone Master
Posts: 8206
Joined: 01 Jan 2006 04:30
Location: Koloa, Hawaii USA

Postby DJ » 01 Jun 2006 11:29

The channel number represents the frequency of the broadcast.

blaas

Postby blaas » 01 Jun 2006 12:37

I want to change the frequency asociat whit a channel number .....
ex: 19= video freq=151312500
I want to be 19= 154502500
how do this??

DJ
Cone Master
Cone Master
Posts: 8206
Joined: 01 Jan 2006 04:30
Location: Koloa, Hawaii USA

Postby DJ » 01 Jun 2006 12:44

Not with VLC. The channel represents the frequency and there is no fine tune as this went out a very long time ago.

VLC was never intended to be a replacement for the software that came with your capture device or TV tuner.

Guest

Postby Guest » 01 Jun 2006 13:11

where i find the tabel of equivalent channel = freqvency in VLC ....
I want to watch my favorite channel by streeming on my mobilephone.
(now i can streem only someone tv channel)
(i`m sorry for bad english)

komagain

Aquisition Card

Postby komagain » 01 Jun 2006 21:30

Thanks

DJ
Cone Master
Cone Master
Posts: 8206
Joined: 01 Jan 2006 04:30
Location: Koloa, Hawaii USA

Postby DJ » 01 Jun 2006 21:50

I haven't seen an equivalent frequency --> channel chart in years. Perhaps searching the web will yield better results.

blaas

Postby blaas » 02 Jun 2006 08:42

Vlc is the best !!!

THANKS

dante

for blaas

Postby dante » 07 Jun 2006 21:16

Did you managed to get the frequency list ? I am having the same problem here, browsing by channels yields only to 7 stations from about 50... thanks

gphilip

channel's frequency

Postby gphilip » 11 Jun 2006 19:34

is there any solution? i have the same problem! isn't there an array in the source code or something?? it must be possible to tune that card!!

KeithR

can't tune all cahnnels

Postby KeithR » 17 Jun 2006 05:22

My TV card could scan to all 99 channels or so (New Zealand)and lock (tune) to 13 but lately I go as high as channel 11 (lock to 4 channels). I think this is due to installing the latest Directx (9.0c). Can anyone confirm this or point to somewhere?

BTW: Love VLC.

glargo
New Cone
New Cone
Posts: 9
Joined: 23 May 2006 15:24
Location: Caracas-Venezuela
Contact:

can't tune cahnnels

Postby glargo » 06 Jul 2006 16:10

Hi all,
My problem is that i cant tuner any channel i use

vlc v4l:/dev/video0:norm=1:channel=0:adev=/dev/dsp:audio=0:frequency=51000000 --sout-display

I think that the reason is by the frequency but i dont nowk how obtein a valid frequency

Some idea?

Thanks


Return to “VLC media player for Windows Troubleshooting”

Who is online

Users browsing this forum: No registered users and 57 guests