Can't play stream on a Windows 7 PC

Microsoft Windows specific usage questions
Forum rules
Please post only Windows specific questions in this forum category. If you don't know where to post, please read the different forums' rules. Thanks.
droopyvlc
New Cone
New Cone
Posts: 8
Joined: 24 May 2010 18:37

Can't play stream on a Windows 7 PC

Postby droopyvlc » 24 May 2010 18:55

Hi,

I have a little problem. I have 2 computers with Windows 7 on each. I can play RTP stream on one but not on the other (with the same wire). I think I miss something in the config but can't find what (I switched off my firewall).

The messages are:

main debug: processing request item 0. Mosaique 1 Orange node Liste de lecture skip 0
main debug: resyncing on 0. Mosaique 1 Orange
main debug: 0. Mosaique 1 Orange is at 0
main debug: starting new item
main debug: creating new input thread
main debug: Creating an input for '0. Mosaique 1 Orange'
main debug: thread (input) created at priority 1 (../.././src/input/input.c:230)
main debug: thread started
main debug: using timeshift granularity of 50 MBytes
main debug: using timeshift path 'C:\Users\Admin\AppData\Local\Temp'
main debug: `rtp://@232.0.1.29:8200' gives access `rtp' demux `' path `@232.0.1.29:8200'
main debug: creating demux: access='rtp' demux='' path='@232.0.1.29:8200'
main debug: looking for access_demux module: 1 candidate
main debug: net: opening 232.0.1.29 datagram port 8200
main debug: Multicast group join request
main debug: using access_demux module "rtp"
main debug: TIMER module_need() : 2.000 ms - Total 2.000 ms / 1 intvls (Avg 2.000 ms)
main debug: looking for a subtitle file in C:\Program Files\VideoLAN\VLC\
main debug: `rtp://@232.0.1.29:8200' successfully opened
qt4 debug: IM: Setting an input
qt4 debug: Updating the geometry
qt4 debug: Updating the geometry

All seems OK but no video and no sound :(
Any idea?

Thanks for your help!

VLC_help
Mega Cone Master
Mega Cone Master
Posts: 25661
Joined: 13 Sep 2006 14:16

Re: Can't play stream on a Windows 7 PC

Postby VLC_help » 24 May 2010 19:13

Removal of %appdata%\vlc folder helps? Does the other computer have two or more NICs?

droopyvlc
New Cone
New Cone
Posts: 8
Joined: 24 May 2010 18:37

Re: Can't play stream on a Windows 7 PC

Postby droopyvlc » 25 May 2010 15:04

I will try this tonight. My PC has 2 NICs but the symptom is the same with one disabled.

droopyvlc
New Cone
New Cone
Posts: 8
Joined: 24 May 2010 18:37

Re: Can't play stream on a Windows 7 PC

Postby droopyvlc » 25 May 2010 19:26

I deleted the folder but the result is the same...

droopyvlc
New Cone
New Cone
Posts: 8
Joined: 24 May 2010 18:37

Re: Can't play stream on a Windows 7 PC

Postby droopyvlc » 29 May 2010 10:04

Anyone has an idea?
Thank you for your help.

droopyvlc
New Cone
New Cone
Posts: 8
Joined: 24 May 2010 18:37

Re: Can't play stream on a Windows 7 PC

Postby droopyvlc » 29 May 2010 10:04

Anyone has an idea?
I'm the only one to have this problem?

Thank you for your help.

jhb50
Blank Cone
Blank Cone
Posts: 45
Joined: 24 May 2010 21:56

Re: Can't play stream on a Windows 7 PC

Postby jhb50 » 29 May 2010 18:45

It would be helpful if you would post the comand line being used and the details of the 2 systems you are using.
I get the same log and inability to play with vlc rtp://@232.0.1.29:8200 on my W7-64bit system so it looks like there is no stream being sent. What system are you getting the stream on?

droopyvlc
New Cone
New Cone
Posts: 8
Joined: 24 May 2010 18:37

Re: Can't play stream on a Windows 7 PC

Postby droopyvlc » 05 Jun 2010 17:59

I'm stream my IPTV from internet box (Orange TV).

* On my first system (Win 7 - 32 bits) where I cannot view my IPTV I have this log:

main debug: processing request item 0. Mosaique 1 Orange node Liste de lecture skip 0
main debug: resyncing on 0. Mosaique 1 Orange
main debug: 0. Mosaique 1 Orange is at 0
main debug: starting new item
main debug: creating new input thread
main debug: Creating an input for '0. Mosaique 1 Orange'
main debug: thread (input) created at priority 1 (../.././src/input/input.c:214)
main debug: thread started
main debug: using timeshift granularity of 50 MiB
main debug: using timeshift path 'C:\Users\Admin\AppData\Local\Temp'
main debug: `rtp://@232.0.1.29:8200' gives access `rtp' demux `' path `@232.0.1.29:8200'
main debug: creating demux: access='rtp' demux='' path='@232.0.1.29:8200'
main debug: looking for access_demux module: 1 candidate
main debug: net: opening 232.0.1.29 datagram port 8200
main debug: Multicast group join request
main debug: using access_demux module "rtp"
main debug: TIMER module_need() : 1.000 ms - Total 1.000 ms / 1 intvls (Avg 1.000 ms)
main debug: looking for meta reader module: 2 candidates
lua debug: Trying Lua scripts in C:\Users\Admin\AppData\Roaming\vlc\lua\meta\reader
lua debug: Trying Lua scripts in C:\Program Files\VideoLAN\VLC\lua\meta\reader
lua debug: Trying Lua playlist script C:\Program Files\VideoLAN\VLC\lua\meta\reader\filename.lua
main debug: no meta reader module matching "any" could be loaded
main debug: TIMER module_need() : 2.000 ms - Total 2.000 ms / 1 intvls (Avg 2.000 ms)
main debug: `rtp://@232.0.1.29:8200' successfully opened
qt4 debug: IM: Setting an input

* On my second system (Win 7 - 64 bits) where I can view my IPTV I have this log:

main debug: processing request item 0. Mosaique 1 Orange node Liste de lecture skip 0
main debug: resyncing on 0. Mosaique 1 Orange
main debug: 0. Mosaique 1 Orange is at 0
main debug: starting new item
main debug: creating new input thread
main debug: Creating an input for '0. Mosaique 1 Orange'
main debug: thread (input) created at priority 1 (../.././src/input/input.c:230)
main debug: thread started
main debug: using timeshift granularity of 50 MBytes
main debug: using timeshift path 'C:\Users\yfaure\AppData\Local\Temp'
main debug: `rtp://@232.0.1.29:8200' gives access `rtp' demux `' path `@232.0.1.29:8200'
main debug: creating demux: access='rtp' demux='' path='@232.0.1.29:8200'
main debug: looking for access_demux module: 1 candidate
main debug: net: opening 232.0.1.29 datagram port 8200
main debug: Multicast group join request
main debug: using access_demux module "rtp"
main debug: TIMER module_need() : 2.000 ms - Total 2.000 ms / 1 intvls (Avg 2.000 ms)
main debug: looking for a subtitle file in C:\Program Files (x86)\VideoLAN\VLC\
main debug: `rtp://@232.0.1.29:8200' successfully opened
qt4 debug: IM: Setting an input
qt4 debug: Updating the geometry
qt4 debug: Updating the geometry
rtp debug: detected MPEG2 TS
rtp debug: added payload type 33 (f = 90000 Hz)
main debug: thread (stream out) created at priority 1 (../.././src/input/stream_demux.c:98)
rtp debug: added RTP source (00000000)
main debug: thread started
main debug: creating demux: access='' demux='ts' path=''
main debug: looking for demux module: 1 candidate
main debug: using demux module "ts"
main debug: TIMER module_need() : 1.000 ms - Total 1.000 ms / 1 intvls (Avg 1.000 ms)
ts debug: DEMUX_SET_GROUP -1 00000000
ts debug: pid[1221] unknown
ts debug: pid[555] unknown
ts debug: pid[1321] unknown
ts debug: pid[1121] unknown
ts debug: PATCallBack called
ts debug: new PAT ts_id=1 version=1 current_next=1
ts debug: * number=1021 pid=1121
ts debug: PMTCallBack called
ts debug: new PMT program number=1021 version=3 pid_pcr=1221
ts debug: * descriptor : unknown (0xe)
ts debug: * descriptor : unknown (0xc)
ts debug: * es pid=1221 type=27 dr->i_tag=0x52
ts debug: * es pid=1221 type=27 dr->i_tag=0x2
ts debug: * es pid=1221 type=27 dr->i_tag=0x6
ts debug: * es pid=1221 type=27 dr->i_tag=0xe
ts debug: * es pid=1221 type=27 fcc=h264
main debug: selecting program id=1021
main debug: looking for decoder module: 35 candidates
avcodec debug: libavcodec already initialized
qt4 debug: Updating the geometry
qt4 debug: Updating the geometry
qt4 debug: Updating the geometry
qt4 debug: Updating the geometry
avcodec debug: ffmpeg codec (H264 - MPEG-4 AVC (part 10)) started
main debug: using decoder module "avcodec"
main debug: TIMER module_need() : 2.000 ms - Total 2.000 ms / 1 intvls (Avg 2.000 ms)
main debug: looking for packetizer module: 21 candidates
main debug: using packetizer module "packetizer_h264"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: thread (decoder) created at priority 0 (../.././src/input/decoder.c:315)
main debug: thread started
ts debug: * es pid=1321 type=4 dr->i_tag=0x52
ts debug: * es pid=1321 type=4 dr->i_tag=0xa
ts debug: * es pid=1321 type=4 dr->i_tag=0x3
ts debug: * es pid=1321 type=4 dr->i_tag=0xe
ts debug: found language: fre
ts debug: * es pid=1321 type=4 fcc=mpga
main debug: looking for decoder module: 35 candidates
main debug: using decoder module "mpeg_audio"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: thread (decoder) created at priority 2 (../.././src/input/decoder.c:315)
main debug: thread started
qt4 debug: Updating the geometry
ts warning: first packet for pid=1221 cc=0x5
qt4 debug: Updating the geometry
qt4 debug: Updating the geometry
ts warning: first packet for pid=1321 cc=0x2
main debug: Buffering 0%
qt4 debug: Updating the geometry
main debug: Buffering 3%
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
qt4 debug: Updating the geometry
qt4 debug: Updating the geometry
packetizer_h264 warning: waiting for SPS/PPS
ts debug: pid[1] unknown
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
main debug: Buffering 7%
main debug: Buffering 10%
packetizer_h264 warning: waiting for SPS/PPS
ts debug: PSINewTableCallBack: table 0x42(66) ext=0x1(1)
ts debug: SDTCallBack called
ts debug: new SDT ts_id=1 version=3 current_next=1 network_id=1
ts debug: * service id=1021 eit schedule=0 present=0 running=4 free_ca=0
ts debug: - type=1 provider=France Telecom name=Mosaique 1
main debug: EsOutProgramMeta: number=1021
packetizer_h264 warning: waiting for SPS/PPS
main debug: Buffering 14%
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
main debug: Buffering 17%
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
main debug: Buffering 21%
mpeg_audio debug: MPGA channels:2 samplerate:48000 bitrate:128
main debug: reusing aout
main debug: looking for audio output module: 3 candidates
aout_directx debug: OpenAudio
aout_directx debug: found device: Primary Sound Driver
aout_directx debug: found device: Speakers / Headphones (SigmaTel High Definition Audio CODEC)
aout_directx debug: found device: Digital Output Device (SPDIF Out) (SigmaTel High Definition Audio CODEC)
packetizer_h264 warning: waiting for SPS/PPS
aout_directx debug: device supports 2 channels (DEFAULT!)
aout_directx debug: device supports 1 channel
aout_directx debug: Windows says your SpeakerConfig is stereo
aout_directx debug: creating DirectSoundThread
main debug: thread (DirectSound Notification Thread) created at priority 15 (../../.././modules/audio_output/directx.c:427)
main debug: using audio output module "aout_directx"
main debug: TIMER module_need() : 14.000 ms - Total 14.000 ms / 1 intvls (Avg 14.000 ms)
main debug: output 's16l' 48000 Hz Stereo frame=1 samples/4 bytes
main debug: mixer 'fl32' 48000 Hz Stereo frame=1 samples/8 bytes
main debug: thread started
main debug: filter(s) 'fl32'->'s16l' 48000 Hz->48000 Hz Stereo->Stereo
aout_directx debug: DirectSoundThread ready
main debug: looking for audio filter module: 24 candidates
main debug: using audio filter module "converter_float"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: found a filter for the whole conversion
main debug: looking for audio mixer module: 3 candidates
main debug: using audio mixer module "float32_mixer"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: input 'mpga' 48000 Hz Stereo frame=1152 samples/1161 bytes
main debug: looking for audio filter module: 1 candidate
scaletempo warning: bad input or output format
main warning: no audio filter module matching "scaletempo" could be loaded
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: looking for audio filter module: 1 candidate
scaletempo debug: format: 48000 rate, 2 nch, 4 bps, fl32
scaletempo debug: params: 30 stride, 0.200 overlap, 14 search
scaletempo debug: 1.000 scale, 1440.000 stride_in, 1440 stride_out, 1152 standing, 288 overlap, 672 search, 2400 queue, fl32 mode
main debug: using audio filter module "scaletempo"
main debug: TIMER module_need() : 1.000 ms - Total 1.000 ms / 1 intvls (Avg 1.000 ms)
main debug: filter(s) 'mpga'->'fl32' 48000 Hz->48000 Hz Stereo->Stereo
main debug: looking for audio filter module: 24 candidates
main debug: using audio filter module "mpgatofixed32"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: found a filter for the whole conversion
main debug: filter(s) 'fl32'->'fl32' 52800 Hz->48000 Hz Stereo->Stereo
main debug: looking for audio filter module: 24 candidates
main debug: using audio filter module "bandlimited_resampler"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: found a filter for the whole conversion
main debug: End of audio preroll
main debug: Buffering 24%
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
main debug: Buffering 28%
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
main debug: Buffering 31%
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
main debug: Buffering 35%
main debug: Buffering 38%
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
main debug: Buffering 42%
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
main debug: Buffering 45%
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
main debug: Buffering 49%
main debug: Buffering 52%
packetizer_h264 warning: waiting for SPS/PPS
main debug: Buffering 56%
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
main debug: Buffering 59%
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
main debug: Buffering 63%
main debug: Buffering 64%
packetizer_h264 warning: waiting for SPS/PPS
main debug: Buffering 67%
main debug: Buffering 71%
main debug: Buffering 74%
packetizer_h264 debug: found NAL_SPS (sps_id=0)
packetizer_h264 debug: found NAL_PPS (pps_id=0 sps_id=0)
main debug: Buffering 78%
main debug: Buffering 81%
main debug: no usable vout present, spawning one
main debug: looking for text renderer module: 2 candidates
main debug: thread (fontlist builder) created at priority 0 (../../.././modules/misc/freetype.c:480)
freetype debug: using fontsize: 2
main debug: using text renderer module "freetype"
main debug: TIMER module_need() : 2.000 ms - Total 2.000 ms / 1 intvls (Avg 2.000 ms)
main debug: looking for video filter2 module: 20 candidates
swscale debug: 32x32 chroma: YUVA -> 16x16 chroma: YUVA with scaling using Bicubic (good quality)
main debug: using video filter2 module "swscale"
main debug: TIMER module_need() : 1.000 ms - Total 1.000 ms / 1 intvls (Avg 1.000 ms)
main debug: looking for video filter2 module: 20 candidates
yuvp debug: YUVP to YUVA converter
main debug: using video filter2 module "yuvp"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: window size: 791x576
main debug: looking for video output module: 7 candidates
main debug: Buffering 85%
main debug: Buffering 88%
main debug: thread started
freetype debug: Building font database...
freetype debug: Finished building font database.
freetype debug: Took 0 microseconds
main debug: thread ended
main debug: Buffering 92%
direct3d debug: creating Vout EventThread
main debug: thread (Vout Events Thread) created at priority 0 (../../../.././modules/video_output/msw/direct3d.c:218)
main debug: thread started
direct3d debug: DirectXCreateWindow
main debug: looking for hwnd module: 3 candidates
qt4 debug: requesting video...
qt4 debug: Video was requested -1, -1
qt4 debug: Video is resizing to: 791 576
qt4 debug: Updating the geometry
main debug: using hwnd module "qt4"
main debug: TIMER module_need() : 13.000 ms - Total 13.000 ms / 1 intvls (Avg 13.000 ms)
direct3d debug: created video sub-window
direct3d debug: Vout EventThread running
direct3d debug: disabling screen saver
main debug: using video output module "direct3d"
main debug: TIMER module_need() : 78.000 ms - Total 78.000 ms / 1 intvls (Avg 78.000 ms)
main debug: Deinterlacing available
main debug: Buffering 95%
main debug: Buffering 99%
direct3d debug: Direct3D device adapter successfully initialized
direct3d debug: selected surface pixel format is YUY2
direct3d debug: 1 Direct3D pictures created successfully
direct3d debug: Direct3D scene created successfully
main debug: got 1 direct buffer(s)
main debug: pic render sz 544x576, of (0,0), vsz 544x576, 4cc I420, ar 98909:72000, sar 16:11, msk r0x0 g0x0 b0x0
main debug: pic in sz 544x576, of (0,0), vsz 544x576, 4cc I420, ar 98909:72000, sar 16:11, msk r0x0 g0x0 b0x0
main debug: pic out sz 544x576, of (0,0), vsz 544x576, 4cc YUY2, ar 98909:72000, sar 16:11, msk r0x0 g0x0 b0x0
main debug: looking for video filter2 module: 20 candidates
main debug: using video filter2 module "i420_yuy2_sse2"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: indirect render, mapping render pictures 0-15 to system pictures 1-16
main debug: End of video preroll
main debug: Received first picture
qt4 debug: Qt: Entering Fullscreen
main debug: Stream buffering done (1030 ms in 1049 ms)
main debug: Decoder buffering done in 0 ms
main warning: buffer is 59789 late, triggering upsampling
main debug: Post-processing available
main debug: audio output is too slow (44889), trashing 50000us
main warning: output date isn't PTS date, requesting resampling (44889)
main warning: timing screwed, stopping resampling
main warning: buffer is 107459 late, triggering upsampling
freetype debug: using fontsize: 36
main debug: looking for video blending module: 1 candidate
blend debug: chroma: YUVA -> YUY2
main debug: using video blending module "blend"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)

Any idea?

Thank you.

jhb50
Blank Cone
Blank Cone
Posts: 45
Joined: 24 May 2010 21:56

Re: Can't play stream on a Windows 7 PC

Postby jhb50 » 06 Jun 2010 16:06

" post the command lines being used "

The logs appear to be from different commands.

droopyvlc
New Cone
New Cone
Posts: 8
Joined: 24 May 2010 18:37

Re: Can't play stream on a Windows 7 PC

Postby droopyvlc » 06 Jun 2010 17:57

I'm using the user interface of VLC, no command lines... How I can find this?

Do you know what's this line in debug means?
"main debug: no meta reader module matching "any" could be loaded"

droopyvlc
New Cone
New Cone
Posts: 8
Joined: 24 May 2010 18:37

Re: Can't play stream on a Windows 7 PC

Postby droopyvlc » 10 Jun 2010 21:39

Nobody can help me?


Return to “VLC media player for Windows Troubleshooting”

Who is online

Users browsing this forum: No registered users and 58 guests