HI guys I would like if possible stream tv from my computer to my cousin who lives in spain, He as a 2mb connection and i have a 10mb could i do it and where do i start reading. I clicked the how to link but get an error code? I have windows xp and he has the same.IS it possible and where do i start?
sorry if this question is not allowed bu i did lok at the rules.thanks in advance kr
Newbie A bit Of Guidance please tv streaming
Re: Newbie A bit Of Guidance please tv streaming
Does VLC installed on your computer see your tv capture card?
If so.. it should be pretty easy. Just try this.
should be pretty simple..
try this:
On the machine with your music you'd like to stream.
1. open vlc.
2. Click media.
3. Click Streamimg
4. Click on the Capture Device Button
5. Select the video input device of your capture card.
6. Select the audio input device of your capture card
7. click Stream
8. click next
7. In the destination box click on the down arrown next to the "Add" button and select http and click add.
8. in the address box type in the ip address of the machine with the stream you'd like to stream for people to tune into. Example: 192.168.1.103
9. in the drop down in the transcoding options box click on the down button and select Video - H.264 + ACC (TS)
10. Click Next
In the generated Stream output String take note of the VB=800. Thats your video bitrate. The higher this number the better the quality of the TV.. but the more bandwidth you'll need to use. The lower the number the less quality but you'll use less bandwith.
Also take note of the AB=128. Thats your audio bit rate. Again.. Lower means a poorer quality, but less band width.. high means better sound but more band width.
11. Then click stream.
If this is the first time doing this and you are on windows, windows will pop up a box asking you to unblock port 8080, just click on the keep unblocking button.
on the machines where you'd like to hear and see the stream:
1. open vlc.
2. Click Media
3. Click a Open Network Stream.
4. Select your protocol to http
5. In the address bar type in the ip address of the machine that is streaming your media. from step 8 above and add a :8080 to it
Example: 192.168.1.103:8080
6. Then Click "Play"..
Enjoy the stream. =)
Tweaking:
Try using the default settings in the Generated Stream Output box as a base line.. they may be fine, or they may be to high of a quality causing network issues.
If they cause problems.. adjust the values down.. like VB=100 and AB=32.. you get the idea.
hope that helps. best of luck!
If so.. it should be pretty easy. Just try this.
should be pretty simple..
try this:
On the machine with your music you'd like to stream.
1. open vlc.
2. Click media.
3. Click Streamimg
4. Click on the Capture Device Button
5. Select the video input device of your capture card.
6. Select the audio input device of your capture card
7. click Stream
8. click next
7. In the destination box click on the down arrown next to the "Add" button and select http and click add.
8. in the address box type in the ip address of the machine with the stream you'd like to stream for people to tune into. Example: 192.168.1.103
9. in the drop down in the transcoding options box click on the down button and select Video - H.264 + ACC (TS)
10. Click Next
In the generated Stream output String take note of the VB=800. Thats your video bitrate. The higher this number the better the quality of the TV.. but the more bandwidth you'll need to use. The lower the number the less quality but you'll use less bandwith.
Also take note of the AB=128. Thats your audio bit rate. Again.. Lower means a poorer quality, but less band width.. high means better sound but more band width.
11. Then click stream.
If this is the first time doing this and you are on windows, windows will pop up a box asking you to unblock port 8080, just click on the keep unblocking button.
on the machines where you'd like to hear and see the stream:
1. open vlc.
2. Click Media
3. Click a Open Network Stream.
4. Select your protocol to http
5. In the address bar type in the ip address of the machine that is streaming your media. from step 8 above and add a :8080 to it
Example: 192.168.1.103:8080
6. Then Click "Play"..
Enjoy the stream. =)
Tweaking:
Try using the default settings in the Generated Stream Output box as a base line.. they may be fine, or they may be to high of a quality causing network issues.
If they cause problems.. adjust the values down.. like VB=100 and AB=32.. you get the idea.
hope that helps. best of luck!
Last edited by kdh on 02 Dec 2009 19:53, edited 1 time in total.
Re: Newbie A bit Of Guidance please tv streaming
Thats a great reply will try this when i get home, i dont have a capture card but a usb freeview pen but i think it will work the same or does it need to be a capture card ?
thanks for such a good reply.
thanks for such a good reply.
Re: Newbie A bit Of Guidance please tv streaming
Nah.. I personally use a USB Web Cam with out issues so I don't see why a usb freeview pen wouldn't work.
Post your results, and let us know how it works out for you.
Post your results, and let us know how it works out for you.
Re: Newbie A bit Of Guidance please tv streaming
Hi My vlc cant find my usb freeview pen its a pinnicale tv centre pro and the options are only directshow and dbv direct show and desktop? Any suggestions would e great and my pc has found 48 freeview channels how many would i be able to stream in one go ? sorry for so many question ut just trying to help my cousin out so he can watch uk tv.
He had british tv working but this has stopped. thanks for your help so far.
He had british tv working but this has stopped. thanks for your help so far.
Re: Newbie A bit Of Guidance please tv streaming
If VLC can't find your use usb free pen, you'll need to use something else. I don't like pinnacle products due to a bad experience with them a few years back. sorry.Hi My vlc cant find my usb freeview pen its a pinnicale tv centre pro and the options are only directshow and dbv direct show and desktop? Any suggestions would e great and my pc has found 48 freeview channels how many would i be able to stream in one go ? sorry for so many question ut just trying to help my cousin out so he can watch uk tv.
He had british tv working but this has stopped. thanks for your help so far.
VLC can't really allow your cousin change the freeview channels if he doesn't like whats on.. Thats not what it was ment for.
If I was in your shoes.. I would do something like this:
Buy this: http://www.adstech.com/products/USBAV-1 ... BAV-191-EF Not sure if it would work.
Setup VLC like I told you above..
Call my cousin and say "HEY, what channel do you want to watch?" then set the channel on my cable box which would be connected to that usb capture card.
If he wants to change the channel, he would have to call you and say "HEY! Change the channel"..
Re: Newbie A bit Of Guidance please tv streaming
Just a bit of info: I tried kdh's instructions above and received no stream, But i tried again, adding a step in the instructions for the streaming computer, as follows:
On the machine with your music you'd like to stream.
1. open vlc.
2. Click media.
3. Click Streamimg
4. Click on the Capture Device Button
5. Select the video input device of your capture card.
6. Select the audio input device of your capture card
6a. In the box "Video Size" enter the size of the video that the capture device is set to capture.
7. click Stream
8. click next
7. In the destination box click on the down arrown next to the "Add" button and select http and click add.
8. in the address box type in the ip address of the machine with the stream you'd like to stream for people to tune into. Example: 192.168.1.103
9. in the drop down in the transcoding options box click on the down button and select Video - H.264 + ACC (TS)
10. Click Next
I entered the text "320x240", since my card was set to that size in its configuration. (The card is an old Conexant BT878, company has gone out of business since Windows ME, and the XP drivers came from http://btwincap.sourceforge.net/). Streaming works great! Thanks for the tutorial!!!
On the machine with your music you'd like to stream.
1. open vlc.
2. Click media.
3. Click Streamimg
4. Click on the Capture Device Button
5. Select the video input device of your capture card.
6. Select the audio input device of your capture card
6a. In the box "Video Size" enter the size of the video that the capture device is set to capture.
7. click Stream
8. click next
7. In the destination box click on the down arrown next to the "Add" button and select http and click add.
8. in the address box type in the ip address of the machine with the stream you'd like to stream for people to tune into. Example: 192.168.1.103
9. in the drop down in the transcoding options box click on the down button and select Video - H.264 + ACC (TS)
10. Click Next
I entered the text "320x240", since my card was set to that size in its configuration. (The card is an old Conexant BT878, company has gone out of business since Windows ME, and the XP drivers came from http://btwincap.sourceforge.net/). Streaming works great! Thanks for the tutorial!!!
-
davidgreem
- New Cone
- Posts: 2
- Joined: 09 Apr 2010 07:49
Re: Newbie A bit Of Guidance please tv streaming
I think this method is very lengthy and in the streaming TV is not coming with that good quality video, instead i will recommend you to record the the things he wants to see on your HD TV and transfer him through the Internet, this will be fast and even your brother will enjoy the High quality. I have been doing this myself and just try it once.
Mistakes are the portals of Discovery.
Return to “VLC stream-output (sout)”
Who is online
Users browsing this forum: No registered users and 15 guests