Hauppauge 350 doesn´t work with Streaming VLC

[Rafa Chao]

Hi everybody,

I can stream MPEG-2 with Hauppauge 250, but whe i try the same with Hauppauge 350, the vlc hangs in the middle of the process.

I´m using vlc 0.7.2
The instruction is:

/usr/local/bin/vlc -vvv pvr:/dev/video0:norm=pal:size=720x576:frequency=576250:bitrate=3000000:maxbitrate=4000000 --sout udp:239.10.10.239:1239 --ttl 12 --cr-average 1000

The result is as follows:

VLC media player 0.7.2 Bond
[00000000] main root debug: VLC media player - version 0.7.2 Bond - (c) 1996-2004 VideoLAN
[00000000] main root debug: libvlc was configured with ./configure --enable-pvr --enable-ffmpeg --with-ffmpeg-mp3lame --with-ffmpeg-tree=/Shiva/11_vlc_072/ffmpeg-20040520
[00000001] main vlc debug: translation test: code is "C"
[00000001] main vlc debug: opening config file /root/.vlc/vlcrc
[00000001] main vlc warning: config file /root/.vlc/vlcrc does not exist yet
[00000001] main vlc debug: checking builtin modules
[00000001] main vlc debug: checking plugin modules
[00000001] main vlc debug: recursively browsing `modules'
[00000001] main vlc debug: recursively browsing `/usr/local/lib/vlc'
[00000001] main vlc debug: recursively browsing `plugins'
[00000001] main vlc debug: module bank initialized, found 159 modules
[00000001] main vlc debug: opening config file /root/.vlc/vlcrc
[00000001] main vlc warning: config file /root/.vlc/vlcrc does not exist yet
[00000001] main vlc debug: CPU has capabilities 486 586 MMX MMXEXT SSE FPU
[00000001] main vlc debug: looking for memcpy module
[00000001] main vlc debug: probing 3 candidates
[00000010] main module debug: using memcpy module "memcpymmxext"
[00000194] main playlist debug: creating group Normal with id 1 at position 0
[00000194] main playlist debug: waiting for thread completion
[00000194] main playlist debug: thread 1095130304 (playlist) created at priority 0 (src/playlist/playlist.c:109)
[00000195] main interface debug: looking for interface module
[00000195] main interface debug: probing 1 candidate
[00000100] main module debug: using interface module "hotkeys"
[00000195] main interface debug: interface initialized
[00000195] main interface debug: thread 1103518784 (interface) created at priority 0 (src/interface/interface.c:152)
[00000194] main playlist debug: adding playlist item `pvr:/dev/video0:norm=pal:size=720x576:frequency=576250:bitrate=3000000:maxbitrate=4000000' ( pvr:/dev/video0:norm=pal:size=720x576:frequency=576250:bitrate=3000000:maxbitrate=4000000 )
[00000196] main interface debug: looking for interface module
[00000196] main interface debug: probing 2 candidates
Remote control interface initialized, `h' for help
[00000097] main module debug: using interface module "rc"
[00000196] main interface debug: interface initialized
[00000194] main playlist debug: creating new input thread
[00000197] main input: playlist item `pvr:/dev/video0:norm=pal:size=720x576:frequency=576250:bitrate=3000000:maxbitrate=4000000'
[00000197] main input debug: waiting for thread completion
[00000197] main input debug: access `pvr', demux `', name `/dev/video0:norm=pal:size=720x576:frequency=576250:bitrate=3000000:maxbitrate=4000000'
[00000197] main input debug: thread 1116941248 (input) created at priority 0 (src/input/input.c:326)
[00000197] main input debug: cmd=state old=10 new=1
[00000197] main input debug: playing at normal rate
[00000196] main interface debug: thread 1125329728 (manager) created at priority 0 (src/interface/interface.c:136)
[00000198] main stream output debug: using sout chain=`std{mux="",access="udp",url="239.10.10.239:1239"}'
[00000198] main stream output debug: stream=`std'
[00000199] main private debug: looking for sout stream module
[00000199] main private debug: probing 1 candidate
[00000199] main private warning: missing value for option mux
[00000199] main private debug: set sout option: sout-standard-access to udp
[00000199] main private debug: set sout option: sout-standard-url to 239.10.10.239:1239
[00000199] stream_out_standard private debug: creating `udp/(null)://239.10.10.239:1239'
[00000199] stream_out_standard private debug: extention is 239:1239
[00000199] stream_out_standard private debug: extention -> mux=(null)
[00000199] stream_out_standard private debug: using `udp/ts://239.10.10.239:1239'
[00000200] main private debug: looking for sout access module
[00000200] main private debug: probing 1 candidate
[00000201] main private debug: looking for network module
[00000201] main private debug: probing 2 candidates
[00000201] ipv4 private debug: socket buffer size is 0x1fffe instead of 0x80000
[00000149] main module debug: using network module "ipv4"
[00000149] main module debug: unlocking module "ipv4"
[00000201] main private debug: thread 1133718208 (sout write thread) created at priority 0 (udp.c:274)
[00000200] access_output_udp private debug: udp access output opened(239.10.10.239:1239)
[00000038] main module debug: using sout access module "access_output_udp"
[00000199] stream_out_standard private debug: access opened
[00000202] main private debug: looking for sout mux module
[00000202] main private debug: probing 2 candidates
[00000202] mux_ts_dvbpsi private debug: Open
[00000202] mux_ts_dvbpsi private debug: shaping=200000 pcr=30000 dts_delay=200000
[00000202] mux_ts_dvbpsi private debug: invalid csa ck (it must be 16 chars long)
[00000162] main module debug: using sout mux module "mux_ts_dvbpsi"
[00000198] main stream output debug: muxer support adding stream at any time
[00000199] stream_out_standard private debug: mux opened
[00000169] main module debug: using sout stream module "stream_out_standard"
[00000197] main input debug: looking for access module
[00000197] main input debug: probing 1 candidate
[00000197] pvr input debug: using video device: /dev/video0
[00000197] pvr input debug: video standard set to:ff
[00000197] pvr input debug: picture size set to:720x576
[00000197] pvr input debug: Tuner frequency set to:576250
[00000197] pvr input debug: Setting codec parameters to: framerate: 1, bitrate: 3000000/4000000/0
[00000028] main module debug: using access module "pvr"
--------------------------------------------------------------
--------------------------------------------------------------

As you can see, the process stops without any reason, but if i change to hauppauge 250, it works fine.

Can anybody help me? Is there any way to make it work?? I think Hauppauge 250 is obsolete, and stopped its manufacturing.

Thanks,