cant convert real media .RM/.RAM file to .MP4

Microsoft Windows specific usage questions
Forum rules
Please post only Windows specific questions in this forum category. If you don't know where to post, please read the different forums' rules. Thanks.
marny67
New Cone
New Cone
Posts: 6
Joined: 15 May 2024 23:04

cant convert real media .RM/.RAM file to .MP4

Postby marny67 » 15 May 2024 23:23

I've tried to convert a 60MB real media .RM/.RAM file to .MP4

The audio always converts ok but the video doesnt convert at all. Ive tried profiles H.264 + MP3 (MP4) and H.265 + MP3 (MP4).

Its worth noting that I was able to convert it to a .TS file using profile H.264 + MP3 (TS), and the video did convert! BUT the file size was about 200MB size. When I used convertio.com to convert it for me online as an MP4, it worked well with a file size of about 114MB.

Is it me or is it VLC ???

Lotesdelere
Cone Master
Cone Master
Posts: 10005
Joined: 08 Sep 2006 04:39
Location: Europe

Re: cant convert real media .RM/.RAM file to .MP4

Postby Lotesdelere » 16 May 2024 10:48

So to sum it up, when you play this file with VLC you can see the video. When you convert it to TS it works but it doesn't work when you convert it to MP4.
Please open Tools -> Messages (set Verbosity to 2) before you start the conversion, and then paste the full resulting log here or on Pastebin.com or on Justpaste.it if it's too long.

The file size depends on the settings of the encoder.

marny67
New Cone
New Cone
Posts: 6
Joined: 15 May 2024 23:04

Re: cant convert real media .RM/.RAM file to .MP4

Postby marny67 » 18 May 2024 19:33


Lotesdelere
Cone Master
Cone Master
Posts: 10005
Joined: 08 Sep 2006 04:39
Location: Europe

Re: cant convert real media .RM/.RAM file to .MP4

Postby Lotesdelere » 19 May 2024 00:19

Code: Select all

main debug: using sout chain=`transcode{vcodec=h264,acodec=mpga,ab=128,channels=2,samplerate=44100,scodec=none}:std{access=file{no-overwrite},mux=mp4,dst='C:/Users/jane/Desktop/new.mp4'}' ... x264 info: profile High, level 1.3 main debug: using encoder module "x264" main error: cannot add a new stream (unsupported while muxing to this format). You can try increasing sout-mux-caching value stream_out_transcode error: cannot add this stream main error: cannot continue streaming due to errors with codec RV20

Muxing these formats to MP4 should work, I don't understand why it fails in this case.
Please upload a short sample of your original problematic file to WeTransfer.com or Disroot.org and then post the link to the file here.
https://wetransfer.com
https://upload.disroot.org

Rémi Denis-Courmont
Developer
Developer
Posts: 15280
Joined: 07 Jun 2004 16:01
VLC version: master
Operating System: Linux
Contact:

Re: cant convert real media .RM/.RAM file to .MP4

Postby Rémi Denis-Courmont » 19 May 2024 17:53

TS supports dynamic tracks, whereas MP4 does not. That is the most likely reason why MP4 fails while TS succeeds.
Rémi Denis-Courmont
https://www.remlab.net/
Private messages soliciting support will be systematically discarded

marny67
New Cone
New Cone
Posts: 6
Joined: 15 May 2024 23:04

Re: cant convert real media .RM/.RAM file to .MP4

Postby marny67 » 19 May 2024 22:31

I used clideo.com to cut a short 15 sec segment. Here it is on wetransfer.com
https://we.tl/t-jkYP1fOvab

Lotesdelere
Cone Master
Cone Master
Posts: 10005
Joined: 08 Sep 2006 04:39
Location: Europe

Re: cant convert real media .RM/.RAM file to .MP4

Postby Lotesdelere » 20 May 2024 10:02

I could convert this file without any problem. But this one is RV10 video + AC-3 audio whilst your messages log shows a file with RV20 video + Cook audio.

marny67
New Cone
New Cone
Posts: 6
Joined: 15 May 2024 23:04

Re: cant convert real media .RM/.RAM file to .MP4

Postby marny67 » 20 May 2024 22:11

Good point. I verified the original video is RV20 + Cook audio.
When I used clideo.com to cut a short 15 sec segment, the resulting file shows that It was changed to RV10 video + dnet audio.

Lotesdelere
Cone Master
Cone Master
Posts: 10005
Joined: 08 Sep 2006 04:39
Location: Europe

Re: cant convert real media .RM/.RAM file to .MP4

Postby Lotesdelere » 21 May 2024 09:59

So this site converted the video, it's not a binary cut. For doing so, cut it with DGsplit and read here about how to do it:
https://forum.videolan.org/viewtopic.ph ... 35#p193335
200 MB max should be enough but a full complete short file is better.

marny67
New Cone
New Cone
Posts: 6
Joined: 15 May 2024 23:04

Re: cant convert real media .RM/.RAM file to .MP4

Postby marny67 » 21 May 2024 20:01

Only the first chunk came out, the rest were full of errors using DGsplit.
So here is the one chunk I got, 2MB. The video is RV20 + Cook audio.

https://we.tl/t-W4okgTPUak

Lotesdelere
Cone Master
Cone Master
Posts: 10005
Joined: 08 Sep 2006 04:39
Location: Europe

Re: cant convert real media .RM/.RAM file to .MP4

Postby Lotesdelere » 22 May 2024 13:20

I could reproduce the issue with this sample, the video was not converted and I got an audio only file.
That said, VLC seems to struggle to play this file while other players don't have such problems.

You should create a new report ticket on the VLC issues tracker with your above report, the link to your sample file and the link to this thread:
https://code.videolan.org/videolan/vlc/-/issues

If possible, because of this:
https://forum.videolan.org/viewtopic.ph ... 27#p538427

marny67
New Cone
New Cone
Posts: 6
Joined: 15 May 2024 23:04

Re: cant convert real media .RM/.RAM file to .MP4

Postby marny67 » 10 Jun 2024 22:09

Regarding your suggestion from this thread: https://forum.videolan.org/viewtopic.php?f=14&t=164600

I cant create a new report ticket on the VLC issues tracker per your advice.

When I go to https://code.videolan.org/users/sign_in
I've been getting this message for weeks.

"Your account is pending approval from your GitLab administrator and hence blocked. Please contact your GitLab administrator if you think this is an error. "

I dont see a way to contact GitLab administrator.

Lotesdelere
Cone Master
Cone Master
Posts: 10005
Joined: 08 Sep 2006 04:39
Location: Europe

Re: cant convert real media .RM/.RAM file to .MP4

Postby Lotesdelere » 11 Jun 2024 12:58

Regarding your suggestion from this thread: https://forum.videolan.org/viewtopic.php?f=14&t=164600

I cant create a new report ticket on the VLC issues tracker per your advice.

When I go to https://code.videolan.org/users/sign_in
I've been getting this message for weeks.

"Your account is pending approval from your GitLab administrator and hence blocked. Please contact your GitLab administrator if you think this is an error. "

I dont see a way to contact GitLab administrator.

Either this thread:
https://forum.videolan.org/viewtopic.php?f=10&t=163506

Or you can send an email to videolan (at) videolan.org about the Gitlab account issue.

Or join the IRC channel (faster):

Server: irc.libera.chat
Channel: #videolan


Return to “VLC media player for Windows Troubleshooting”

Who is online

Users browsing this forum: No registered users and 60 guests