VLC doesn't play some MPEG-1 files

Microsoft Windows specific usage questions
Forum rules
Please post only Windows specific questions in this forum category. If you don't know where to post, please read the different forums' rules. Thanks.
demodex
New Cone
New Cone
Posts: 6
Joined: 10 Jan 2008 15:40

VLC doesn't play some MPEG-1 files

Postby demodex » 10 Jan 2008 16:48

Hi, I'm getting problems with some mpg files downloaded from webpages. :(
When I open this files with other players, there's no problem :D . But I get Black Screen and no sound on VLC player. :cry:
I've got this problem under Windows Vista and Windows XP.

With MediaInfo I've got this description of the file:


General #0
Complete name : C:\Users\Rox\AppData\Local\Temp\1-11.mpg
Format : MPEG-1 Program
Format/Family : MPEG-1
File size : 1.15 MiB
PlayTime : 15s 33ms
Bit rate : 641 Kbps
Writing library : VideoChargePro(1.0.1.02)

Video #0
Codec : MPEG-1 Video
Codec settings/Matri : Standard
PlayTime : 15s 33ms
Bit rate : 560 Kbps
Bit rate mode : CBR
Width : 320 pixels
Height : 240 pixels
Aspect ratio : 4/3
Frame rate : 30.000 fps
Interlacement : Progressive
Bits/(Pixel*Frame) : 0.243
Writing library : VideoChargePro(1.0.1.02)

Audio #0
Codec : MPEG-1 Audio layer 1
PlayTime : 14s 793ms
Bit rate : 64 Kbps
Bit rate mode : CBR
Channel(s) : 1 channel
Sampling rate : 32 KHz
Resolution : 16 bits
Video0 delay : 1193h



All the MPEG-1 files not viewed with VLC have VideoChargePro as Writing Library and 1193h of Video0 Delay. :shock:

In VLC i've got this messages:


main debug: CPU has capabilities 486 586 MMX 3DNow! MMXEXT SSE SSE2 FPU
main debug: looking for memcpy module: 4 candidates
main debug: using memcpy module "memcpymmxext"
main debug: waiting for thread completion
main debug: thread 3912 (playlist) created at priority 0 (playlist/playlist.c:184)
main debug: waiting for thread completion
main debug: thread 3928 (preparser) created at priority 0 (playlist/playlist.c:210)
main debug: looking for interface module: 1 candidate
main debug: using interface module "hotkeys"
main debug: thread 3952 (interface) created at priority 0 (interface/interface.c:231)
main debug: adding playlist item `C:\Users\Rox\AppData\Local\Temp\1-11.mpg' ( C:\Users\Rox\AppData\Local\Temp\1-11.mpg )
main debug: looking for interface module: 3 candidates
main debug: using interface module "wxwidgets"
main debug: thread 3988 (manager) created at priority 0 (interface/interface.c:216)
wxwidgets debug: Using last windows config '(-1,0,0,1680,1050)(0,612,192,445,107)(2,161,161,426,589)(6,0,0,-1,150)'
wxwidgets debug: id=0 p=(612,192) s=(445,107)
wxwidgets debug: id=2 p=(161,161) s=(426,589)
wxwidgets debug: id=6 p=(0,0) s=(-1,150)
main debug: nothing requested, starting
main debug: creating new input thread
main debug: waiting for thread completion
main debug: creating statistics handler
main debug: thread 4132 (input) created at priority 1 (input/input.c:265)
main debug: drive letter C: found in source
main debug: `C:\Users\Rox\AppData\Local\Temp\1-11.mpg' gives access `' demux `' path `C:\Users\Rox\AppData\Local\Temp\1-11.mpg'
main debug: creating demux: access='' demux='' path='C:\Users\Rox\AppData\Local\Temp\1-11.mpg'
main debug: looking for access_demux module: 1 candidate
main debug: creating access '' path='C:\Users\Rox\AppData\Local\Temp\1-11.mpg'
main debug: looking for access2 module: 5 candidates
vcd debug: trying .cue file: C:\Users\Rox\AppData\Local\Temp\1-11.cue
vcd debug: could not find .cue file
access_file debug: opening file `C:\Users\Rox\AppData\Local\Temp\1-11.mpg'
main debug: using access2 module "access_file"
main debug: pre-buffering...
main debug: received first data for our buffer
main debug: creating demux: access='' demux='' path='C:\Users\Rox\AppData\Local\Temp\1-11.mpg'
main debug: looking for demux2 module: 45 candidates
main debug: using demux2 module "ps"
main debug: looking for a subtitle file in C:\Users\Rox\AppData\Local\Temp\
main debug: `C:\Users\Rox\AppData\Local\Temp\1-11.mpg' successfully opened
ps debug: we found a length of: 14793000
ps debug: we found a length of: 14999012
main debug: selecting program id=0
main debug: looking for decoder module: 28 candidates
main debug: using decoder module "mpeg_audio"
main debug: thread 4276 (decoder) created at priority 2 (input/decoder.c:159)
main debug: looking for decoder module: 28 candidates
main debug: using decoder module "libmpeg2"
main debug: thread 4280 (decoder) created at priority 0 (input/decoder.c:159)
mpeg_audio debug: MPGA channels:1 samplerate:32000 bitrate:64
main debug: no aout present, spawning one
main debug: looking for audio output module: 3 candidates
libmpeg2 debug: 320x240 (display 320,240), aspect 576000, sar 1:1, 30.000 fps
main debug: no usable vout present, spawning one
aout_directx debug: OpenAudio
main debug: window size: 320x240
main debug: looking for video output module: 6 candidates
main debug: Registering subpicture channel, ID: 2
main debug: Registering subpicture channel, ID: 3
main debug: Registering subpicture channel, ID: 4
main debug: Registering subpicture channel, ID: 5
direct3d debug: creating DirectXEventThread
main debug: waiting for thread completion
direct3d debug: DirectXCreateWindow
direct3d debug: created video sub-window
main debug: thread 4472 (DirectX Events Thread) created at priority 0 (direct3d.c:205)
direct3d debug: DirectXEventThread running
direct3d debug: disabling screen saver
main debug: using video output module "direct3d"
main debug: waiting for thread completion
aout_directx debug: found device: Controlador primario de sonido
aout_directx debug: found device: Altavoces (Creative SB Audigy 2 ZS (WDM))
aout_directx debug: found device: Salida SPDIF (Creative SB Audigy 2 ZS (WDM))
aout_directx debug: found device: Interfaz SPDIF (PHASE 22)
aout_directx debug: found device: Altavoces (PHASE 22)
aout_directx debug: device supports 2 channels
aout_directx debug: device supports 1 channel
aout_directx debug: creating DirectSoundThread
main debug: thread 4572 (DirectSound Notification Thread) created at priority 15 (directx.c:372)
aout_directx debug: DirectSoundThread ready
main debug: using audio output module "aout_directx"
main debug: output 's16l' 32000 Hz Stereo/Mono frame=1 samples/4 bytes
main debug: mixer 'fl32' 32000 Hz Stereo/Mono frame=1 samples/8 bytes
main debug: filter(s) 'fl32'->'s16l' 32000 Hz->32000 Hz Stereo/Mono->Stereo/Mono
main debug: looking for audio filter module: 24 candidates
main debug: using audio filter module "float32tos16"
main debug: found a filter for the whole conversion
main debug: looking for audio mixer module: 3 candidates
main debug: using audio mixer module "float32_mixer"
main debug: input 'mpga' 32000 Hz Mono frame=384 samples/684 bytes
main debug: filter(s) 'mpga'->'fl32' 32000 Hz->32000 Hz Mono->Stereo/Mono
main debug: looking for audio filter module: 24 candidates
main debug: looking for audio filter module: 24 candidates
main debug: using audio filter module "mpgatofixed32"
main debug: looking for audio filter module: 24 candidates
main debug: using audio filter module "trivial_channel_mixer"
main debug: found 2 filters for the whole conversion
main debug: filter(s) 'fl32'->'fl32' 35200 Hz->32000 Hz Stereo/Mono->Stereo/Mono
main debug: looking for audio filter module: 24 candidates
main debug: using audio filter module "bandlimited_resampler"
main debug: found a filter for the whole conversion
main warning: PTS is out of range (1279322), dropping buffer
main warning: PTS is out of range (1267384), dropping buffer
main warning: PTS is out of range (1255428), dropping buffer
main warning: PTS is out of range (1243453), dropping buffer
main warning: PTS is out of range (1231477), dropping buffer
main warning: PTS is out of range (1219502), dropping buffer
main warning: PTS is out of range (1207527), dropping buffer
main warning: PTS is out of range (1195551), dropping buffer
main warning: PTS is out of range (1183576), dropping buffer
main warning: PTS is out of range (1171601), dropping buffer
main warning: PTS is out of range (1159625), dropping buffer
main warning: PTS is out of range (1147657), dropping buffer
main warning: PTS is out of range (1135681), dropping buffer
main warning: PTS is out of range (1123705), dropping buffer
main warning: PTS is out of range (1111729), dropping buffer
main warning: PTS is out of range (1099753), dropping buffer
main warning: PTS is out of range (1087777), dropping buffer
main warning: PTS is out of range (1075800), dropping buffer
main warning: PTS is out of range (1063897), dropping buffer
main warning: PTS is out of range (1051921), dropping buffer
main warning: PTS is out of range (1039948), dropping buffer
main warning: PTS is out of range (1024971), dropping buffer
main warning: PTS is out of range (1012995), dropping buffer
main warning: PTS is out of range (1001019), dropping buffer
main warning: PTS is out of range (989042), dropping buffer
main warning: PTS is out of range (977066), dropping buffer
main warning: PTS is out of range (965089), dropping buffer
main warning: PTS is out of range (953113), dropping buffer
main warning: PTS is out of range (941136), dropping buffer
main warning: PTS is out of range (929160), dropping buffer
main warning: PTS is out of range (917183), dropping buffer
main warning: PTS is out of range (905207), dropping buffer
main warning: PTS is out of range (893230), dropping buffer
main warning: PTS is out of range (881253), dropping buffer
main warning: PTS is out of range (869277), dropping buffer
main warning: PTS is out of range (857300), dropping buffer
main warning: PTS is out of range (845324), dropping buffer
main warning: PTS is out of range (833347), dropping buffer
main warning: PTS is out of range (821371), dropping buffer
main warning: PTS is out of range (809394), dropping buffer
main warning: PTS is out of range (797418), dropping buffer
direct3d debug: Direct3D device adapter successfully initialized
direct3d debug: selected surface pixel format is YUY2
direct3d debug: 1 Direct3D pictures created successfully
direct3d debug: Direct3D scene created successfully
main debug: got 1 direct buffer(s)
main debug: picture in 320x240 (0,0,320x240), chroma I420, ar 4:3, sar 1:1
main debug: picture user 320x240 (0,0,320x240), chroma I420, ar 4:3, sar 1:1
main debug: picture out 320x240 (0,0,320x240), chroma YUY2, ar 4:3, sar 1:1
main debug: looking for chroma module: 9 candidates
main debug: using chroma module "i420_yuy2_mmx"
main debug: indirect render, mapping render pictures 0-7 to system pictures 1-8
main debug: thread 4488 (video output) created at priority 1 (video_output/video_output.c:421)
main warning: dts != current_pts (1825870)
main warning: late picture skipped (6515998)


Please, could you help me? :roll:
I love VLC player, and it's my default player. I hate to use Windows Media Player to see this videos. :evil:
Thanks!!!!

VLC_help
Mega Cone Master
Mega Cone Master
Posts: 25661
Joined: 13 Sep 2006 14:16

Re: VLC doesn't play some MPEG-1 files

Postby VLC_help » 11 Jan 2008 18:26

Try to remux those files. TMPGenc and File -> MPEG Tools... and de-multiplex and after that multiplex and try to play them again.

demodex
New Cone
New Cone
Posts: 6
Joined: 10 Jan 2008 15:40

Re: VLC doesn't play some MPEG-1 files

Postby demodex » 11 Jan 2008 22:30

Well, but I don't want to remux every video file I want to view.
I want to see them on the fly.
There is no problem viewing this files with Media Player, PowerDVD, Winamp, media center....only with VLC.

Could anyone help me?

Jean-Baptiste Kempf
Site Administrator
Site Administrator
Posts: 37523
Joined: 22 Jul 2005 15:29
VLC version: 4.0.0-git
Operating System: Linux, Windows, Mac
Location: Cone, France
Contact:

Re: VLC doesn't play some MPEG-1 files

Postby Jean-Baptiste Kempf » 11 Jan 2008 23:50

gives us some samples
Jean-Baptiste Kempf
http://www.jbkempf.com/ - http://www.jbkempf.com/blog/category/Videolan
VLC media player developer, VideoLAN President and Sites administrator
If you want an answer to your question, just be specific and precise. Don't use Private Messages.

marcusbenvicini
New Cone
New Cone
Posts: 1
Joined: 14 Mar 2008 11:03

Re: VLC doesn't play some MPEG-1 files

Postby marcusbenvicini » 14 Mar 2008 11:31

I would like to send you a sample concerning the problem reported by demodex but I can't find the way. Could you tell me that way? Thanks

VLC_help
Mega Cone Master
Mega Cone Master
Posts: 25661
Joined: 13 Sep 2006 14:16

Re: VLC doesn't play some MPEG-1 files

Postby VLC_help » 14 Mar 2008 16:35

Either ftp://streams.videolan.org/incoming/ or use service like rapidshare or megaupload.


Return to “VLC media player for Windows Troubleshooting”

Who is online

Users browsing this forum: No registered users and 70 guests

cron