STREAMING FROM PROGDVB TO VLC

[Emad]

Hi everybody.i am trying to stream the media from my progdvb player to vlc.here are some snapshots showing the settings i have used to do it.i know that free version of progdvb is able to stream only in unicast protocol.as i know vlc is supporting this protocol.i can not figure it out!!!!







i opened vlc,then in media menu choosed the open network stream and entered the following information:
protocol-------udp
address-------- 192.168.238.238 (which is the same shown in the above snapshots,and the same as my skystar 2 virtual network device)
port---------1234 (i have tried other ports before,such as 4444,3333 etc...)
then pressed play,nothing happens.so a go to message window which already set to verbos 2 level.here is the result:


main debug: adding item `udp://192.168.238.238:1234' ( udp://@192.168.238.238:1234 )
qt4 debug: Adding a new MRL to recent ones: udp://@192.168.238.238:1234
main debug: rebuilding array of current - root Playlist
main debug: rebuild done - 1 items, index -1
main debug: processing request item udp://192.168.238.238:1234 node null skip 0
main debug: resyncing on udp://192.168.238.238:1234
main debug: udp://192.168.238.238:1234 is at 0
main debug: starting new item
main debug: creating new input thread
main debug: Creating an input for 'udp://192.168.238.238:1234'
main debug: thread (input) created at priority 1 (../.././src/input/input.c:230)
main debug: thread started
main debug: using timeshift granularity of 50 MBytes
main debug: using timeshift path 'C:\Users\Emad\AppData\Local\Temp'
main debug: `udp://@192.168.238.238:1234' gives access `udp' demux `' path `@192.168.238.238:1234'
main debug: creating demux: access='udp' demux='' path='@192.168.238.238:1234'
main debug: looking for access_demux module: 0 candidates
main debug: no access_demux module matched "udp"
main debug: TIMER module_need() : 1.000 ms - Total 1.000 ms / 1 intvls (Avg 1.000 ms)
main debug: creating access 'udp' path='@192.168.238.238:1234'
main debug: looking for access module: 1 candidate
access_udp debug: opening server=:0 local=192.168.238.238:1234
main debug: net: opening 192.168.238.238 datagram port 1234
main debug: using access module "access_udp"
main debug: TIMER module_need() : 7.000 ms - Total 7.000 ms / 1 intvls (Avg 7.000 ms)
main debug: Using AStream*Block
main debug: pre buffering
qt4 debug: IM: Setting an input


thanks in advance for any guide.

[VLC_help]

http://192.168.238.238:1234 works any better?

[Emad]

i do not get your meaning!!!! but if you mean to use the http protocol in vlc,i have already done it.it is not working.i tried in my internet explorer,and there is a screen showing only the name of the channel being played in progdvb.