2 cams on one computer?

*nix specific usage questions
sjensen
Blank Cone
Blank Cone
Posts: 36
Joined: 14 Jul 2006 20:18

2 cams on one computer?

Postby sjensen » 18 Jul 2006 17:25

Anyone have 2 cams of the same model working together on the same computer? Now that I've got one cam up and streaming, I'm looking at adding another cam (or 3), to minimize the amount of computers I'm going to have to weather-proof (and provide power and netowrk and...) for camming up our zoo...

I'm using 2 of the Logitech Quickcam 4000 Pros, just one works fine, but when I add the second cam to the mix, things lock up and I get messages like

v4l demuxer error: failed capturing new frame

on the second camera, and the first camera just stops broadcasting.

Running Ubuntu 6.06, the saliard.org pwc driver, VLC passes a UDP stream off to Darwin Streaming Server, all on one box. Ideas, thoughts, comments, etc. are appreciated.

Guest

Postby Guest » 09 Aug 2006 15:26

me too,
ubuntu 6.06
using 2 of the Logitech Quickcam either

errmsg
[00000275] v4l demuxer error: failed capturing new frame
[00000275] v4l demuxer error: failed capturing new frame
[00000275] v4l demuxer error: failed capturing new frame
....

cheeseness
Blank Cone
Blank Cone
Posts: 13
Joined: 29 Sep 2005 06:35
Location: Australia
Contact:

Postby cheeseness » 21 Aug 2006 08:51

I'm looking at doing this too.

Did you end up having any success?

At which point does it lock up?
If you try to launch VLC with two cams plugged in, or when you try to get VLC to talk to the second one?
Josh Bush
=========
Fearless Leader
Valiant Systems

sjensen
Blank Cone
Blank Cone
Posts: 36
Joined: 14 Jul 2006 20:18

Postby sjensen » 25 Aug 2006 14:39

No success... problem happens when VLC tries to access second cam...

raden
Blank Cone
Blank Cone
Posts: 20
Joined: 09 Jul 2006 14:55
Location: Indonesia
Contact:

Postby raden » 05 Sep 2006 04:55

maybe this is can help..

use commandline dmesg, to show the device that you used
all device detected linux in /dev, in my case I use two device tv card and detected by /dev/video0 and /dev/video1

:)

cheeseness
Blank Cone
Blank Cone
Posts: 13
Joined: 29 Sep 2005 06:35
Location: Australia
Contact:

Postby cheeseness » 05 Sep 2006 05:05

Is there another way to specify which cam you're using?

I haven't gotten a second cam yet, but that was the process I used to identify which devide I wanted to stream from with my first one.
Josh Bush
=========
Fearless Leader
Valiant Systems

als101
New Cone
New Cone
Posts: 1
Joined: 13 Sep 2006 13:50
Location: Riga, Latvia

2 Cams

Postby als101 » 13 Sep 2006 14:00

You should connect cams to different USB host controllers, not just to different connectors.
There exists bitrate limitation PER CONTROLLER. If controlers are MB built-in -- inspect dmesg or lspci output for controlers list.
Another possible variant -- try USB2 addon card, especially with molex power connector. (Approved by the system at the table in front of me).


Return to “VLC media player for Linux and friends Troubleshooting”

Who is online

Users browsing this forum: No registered users and 24 guests