Something wrong with vlc0.6.0

[rivertoday]

Hi,all, now I got a trouble like the following, if you know what's the matter? Please do me the favor to give me an answer.

Problem description:
using rpm to install all the rpms inside the http://downloads.videolan.org/pub/video ... pm/redhat/,
except for those five with vlc prefix rpms.
and then configure and make the tarball vlc-0.6.0.tar.gz inside the
http://downloads.videolan.org/pub/videolan/vlc/0.6.0/,
after all done, run the vlc, but it can not play the ordinary mpeg2 files.
while if I install the vlc rpm package inside the .../vlc/0.6.0/rpm/redhat
as described above, this vlc can play it perfectly.
OS platform is redhat9.0

In fact I just want to modify some source code, tarball give me this chance, but now it could not work, who can help me?

Thank you very much!

[fkuehne]

ehm, VLC 0.6.0 is more than 2, I repeat TWO, years old. Please update to the latest release and try again.

[rivertoday]

Thank you for your advice.
Now I installed vlc-0.8.1 on Fedora core 3 and it works well.

While I have another question.
I want to install vlc-0.8.1 on redhat 9 for some reason.
I got correspond version of vlc-0.8.1 in
http://downloads.videolan.org/pub/video ... pm/redhat/
and find those related rpms listed below from rpmfind.net.

a52dec-0.7.4-7.0.rh9.dag.i386.rpm
aalib-1.4.0-5.0.rh9.dag.i386.rpm
faac-1.24-1.0.rh9.rf.i386.rpm
faad2-2.0-4.0.rh9.rf.i386.rpm
ffmpeg-0.4.9-0.20041110.3.0.rh9.rf.i386.rpm
flac-1.1.0-4.0.rh9.dag.i386.rpm
imlib2-1.2.0-1.0.rh9.rf.i386.rpm
lame-3.96.1-2.0.rh9.rf.i386.rpm
libdv-0.102-3.0.rh9.dag.i386.rpm
libdvbpsi-0.1.4-1.rh90.dag.i386.rpm
libdvdcss-1.2.9-1.0.rh9.rf.i386.rpm
libdvdnav-0.1.10-2.0.rh9.dag.i386.rpm
libdvdplay-1.0.1-4.0.rh9.dag.i386.rpm
libdvdread-0.9.4-6.0.rh9.rf.i386.rpm
libid3tag-0.15.1b-3.0.rh9.dag.i386.rpm
libmad-0.15.1b-3.0.rh9.dag.i386.rpm
libogg-1.0-4.i386.rpm
libpostproc-1.0-0.17.pre7.0.rh9.rf.i386.rpm
lirc-0.6.6-4.dag.rh90.i386.rpm
mpeg2dec-0.4.0-4b.0.rh9.dag.i386.rpm
pth-2.0.1-1.0.rh9.dag.i386.rpm
wxGTK-2.4.2-5.0.rh9.rf.i386.rpm
wxGTK-gl-2.4.2-5.0.rh9.rf.i386.rpm
wxGTK-stc-2.4.2-5.0.rh9.rf.i386.rpm
wxGTK-xrc-2.4.2-5.0.rh9.rf.i386.rpm
xosd-2.2.12-1.0.rh9.dag.i386.rpm
xvidcore-1.0.3-1.0.rh9.rf.i386.rpm

at first, I install them by rpm -U *,
then I install the vlc-0.8.1 by rpm -ivh videolan-client-0.8.1-1.0.rh9.rf.i386.rpm
they all went well and successed, and I can load vlc to see its GUI,
BUT when I chose an mpeg2 file to play, it responses nothing,
no picture display, no sound, and it can be closed normally.
I don't know what's wrong?

[rivertoday]

The following is the debug info printed by vlc

[root@river redhat]# vlc -vvv
VLC media player 0.8.1 Janus
[00000001] main vlc debug: opening config file /root/.vlc/vlcrc
[00000001] main vlc warning: config file /root/.vlc/vlcrc does not exist yet
[00000001] main vlc debug: checking builtin modules
[00000001] main vlc debug: checking plugin modules
[00000001] main vlc debug: loading plugins cache file /root/.vlc/cache/plugins-04041e.dat
[00000001] main vlc debug: recursively browsing `modules'
[00000001] main vlc debug: recursively browsing `/usr/lib/vlc'
[00000001] main vlc debug: recursively browsing `plugins'
[00000001] main vlc debug: module bank initialized, found 179 modules
[00000001] main vlc debug: opening config file /root/.vlc/vlcrc
[00000001] main vlc warning: config file /root/.vlc/vlcrc does not exist yet
[00000000] main root debug: VLC media player - version 0.8.1 Janus - (c) 1996-2004 VideoLAN
[00000000] main root debug: libvlc was configured with ./configure --host=i686-pc-linux-gnu --build=i686-pc-linux-gnu --target=i386-redhat-linux --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --x-libraries=/usr/X11R6/lib --enable-release --enable-dvdread --enable-dvdplay --enable-dvbpsi --enable-v4l --enable-vcd --enable-mad --enable-ffmpeg --with-ffmpeg-tree=ffmpeg-20041113 --enable-faad
--enable-xvid --enable-flac --enable-x11 --enable-xvideo --disable-qte --disable-directx --enable-fb --enable-aa --without-wingdi --enable-oss --enable-esd --enable-arts --disable-waveout --enable-gtk --disable-familiar --enable-gnome --enable-wxwindows --disable-opie --disable-macosx --disable-qnx --disable-intfwin --enable-xosd --enable-lirc --enable-pth --disable-st --disable-testsuite --enable-plugins
[00000001] main vlc debug: translation test: code is "C"
[00000001] main vlc debug: opening config file /root/.vlc/vlcrc
[00000001] main vlc warning: config file /root/.vlc/vlcrc does not exist yet
[00000001] main vlc debug: checking builtin modules
[00000001] main vlc debug: checking plugin modules
[00000001] main vlc debug: loading plugins cache file /root/.vlc/cache/plugins-04041e.dat
[00000001] main vlc debug: recursively browsing `modules'
[00000001] main vlc debug: recursively browsing `/usr/lib/vlc'
[00000001] main vlc debug: recursively browsing `plugins'
[00000001] main vlc debug: module bank initialized, found 179 modules
[00000001] main vlc debug: opening config file /root/.vlc/vlcrc
[00000001] main vlc warning: config file /root/.vlc/vlcrc does not exist yet
[00000001] main vlc debug: CPU has capabilities 486 586 MMX MMXEXT SSE SSE2 FPU
[00000001] main vlc debug: looking for memcpy module
[00000001] main vlc debug: probing 3 candidates
[00000010] main module debug: using memcpy module "memcpymmxext"
[00000222] main playlist debug: creating group Normal with id 1 at position 0
[00000222] main playlist debug: waiting for thread completion
[00000222] main playlist debug: thread 138294096 (playlist) created at priority
0 (src/playlist/playlist.c:107)
[00000223] main interface debug: looking for interface module
[00000223] main interface debug: probing 1 candidate
[00000107] main module debug: using interface module "hotkeys"
[00000223] main interface debug: interface initialized
[00000223] main interface debug: thread 138985992 (interface) created at priority 0 (src/interface/interface.c:209)
[00000225] main interface debug: looking for interface module
[00000225] main interface debug: probing 3 candidates
[00000148] main module debug: using interface module "wxwindows"
[00000225] main interface debug: interface initialized
[00000225] main interface debug: thread 139131104 (manager) created at priority
0 (src/interface/interface.c:194)
[00000225] wxwindows interface debug: accelerator table loaded

[rivertoday]

The following is that after I chose an mpeg2 file,

[00000222] main playlist debug: adding playlist item `/home/river/vlc/0.8.1/rpm/redhat/brother.mpg' ( /home/river/vlc/0.8.1/rpm/redhat/brother.mpg )

The following is that after I close the vlc gui,

[00000001] main vlc debug: removing all interfaces
[00000222] main playlist debug: creating new input thread
[00000228] main input debug: waiting for thread completion
[00000225] main interface debug: thread 139131104 joined (src/interface/interface.c:236)
[00000148] main module debug: unlocking module "wxwindows"
[00000228] main input debug: `/home/river/vlc/0.8.1/rpm/redhat/brother.mpg' gives access `' demux `' path `/home/river/vlc/0.8.1/rpm/redhat/brother.mpg'
[00000228] main input debug: demux2_New: access='' demux='' path='/home/river/vlc/0.8.1/rpm/redhat/brother.mpg'
[00000229] main demuxer debug: looking for access_demux module
[00000229] main demuxer debug: probing 2 candidates
[00000228] main input debug: access2_New: access='' path='/home/river/vlc/0.8.1/rpm/redhat/brother.mpg'
[00000232] main access debug: looking for access2 module
[00000232] main access debug: probing 4 candidates
[00000232] vcd access debug: trying .cue file: /home/river/vlc/0.8.1/rpm/redhat/brother.cue
[00000232] vcd access warning: could not open /home/river/vlc/0.8.1/rpm/redhat/brother.mpg
[00000232] access_file access debug: opening file `/home/river/vlc/0.8.1/rpm/redhat/brother.mpg'
[00000021] main module debug: using access2 module "access_file"
[00000237] main private debug: pre buffering
[00000237] main private debug: received first data for our buffer
[00000237] main private debug: prebuffering done 1408981 bytes in 0s - 425203 kbytes/s
[00000228] main input debug: demux2_New: access='' demux='' path='/home/river/vlc/0.8.1/rpm/redhat/brother.mpg'
[00000238] main demuxer debug: looking for demux2 module
[00000238] main demuxer debug: probing 31 candidates
[00000238] mp4 demuxer warning: MP4 plugin discarded (not a valid file)
[00000238] avi demuxer warning: avi module discarded (invalid header)
[00000238] asf demuxer warning: ASF plugin discarded (not a valid file)
[00000238] flac demuxer warning: flac module discarded (no startcode)
[00000238] aac demuxer warning: AAC module discarded
[00000238] main demuxer debug: looking for id3 module
[00000238] main demuxer debug: probing 2 candidates
[00000238] id3tag demuxer debug: checking for ID3 tag
[00000128] main module debug: using id3 module "id3tag"
[00000128] main module debug: unlocking module "id3tag"
[00000238] mpgv demuxer warning: ES module discarded (no startcode)
[00000238] sap demuxer warning: SDP (UDP) module discarded
[00000238] mkv demuxer warning: matroska module discarded (invalid header 0x471fff10)
[00000238] ogg demuxer warning: ogg module discarded (invalid header)
[00000238] real demuxer warning: Real module discarded
[00000238] aiff demuxer warning: AIFF module discarded
[00000238] au demuxer warning: AU module discarded
[00000238] playlist demuxer warning: old import module discarded: invalid file
[00000238] playlist demuxer warning: pls import module discarded
[00000238] nsv demuxer warning: NSV module discarded
[00000238] pva demuxer warning: PVA module discarded
[00000146] main module debug: using demux2 module "ts"
[00000228] main input debug: looking for a subtitle file in /home/river/vlc/0.8.1/rpm/redhat/
[00000238] ts demuxer debug: DEMUX_SET_GROUP 0 (nil)
[00000228] main input debug: `/home/river/vlc/0.8.1/rpm/redhat/brother.mpg' sucessfully opened
[00000238] ts demuxer debug: pid[8191] unknown
[00000238] ts demuxer debug: PATCallBack called
[00000238] ts demuxer debug: new PAT ts_id=4369 version=0 current_next=1
[00000238] ts demuxer debug: * number=10 pid=100
[00000238] ts demuxer debug: PMTCallBack called
[00000238] ts demuxer debug: new PMT program number=10 version=0 pid_pcr=32
[00000238] ts demuxer debug: * es pid=32 type=2 fcc=mpgv
[00000228] main input debug: Selecting program id=10
[00000265] main decoder debug: looking for decoder module
[00000265] main decoder debug: probing 19 candidates
[00000091] main module debug: using decoder module "libmpeg2"
[00000265] main decoder debug: thread 139655104 (decoder) created at priority 0
(src/input/decoder.c:157)
[00000238] ts demuxer debug: * es pid=64 type=3 fcc=mpga
[00000267] main decoder debug: looking for decoder module
[00000267] main decoder debug: probing 19 candidates
[00000094] main module debug: using decoder module "mpeg_audio"
[00000267] main decoder debug: thread 139912824 (decoder) created at priority 10 (src/input/decoder.c:157)
[00000265] libmpeg2 decoder debug: 352x480, aspect 576000, 29.971 fps
[00000265] main decoder debug: no usable vout present, spawning one
[00000283] main video output debug: looking for video output module
[00000283] main video output debug: probing 7 candidates
[00000283] xvideo video output debug: adaptor 0, port 61, format 0x32315659 (YV12) planar
[00000283] xvideo video output debug: Window manager supports NetWM
[00000283] xvideo video output debug: Window manager supports _NET_WM_STATE_FULLSCREEN
[00000283] xvideo video output debug: Window manager supports _NET_WM_STATE_ABOVE
[00000283] xvideo video output debug: Window manager supports _NET_WM_STATE_BELOW
[00000218] main module debug: using video output module "xvideo"
[00000283] main video output debug: waiting for thread completion
[00000283] main video output debug: got 8 direct buffer(s)
[00000283] main video output debug: picture in 352x480, chroma 0x30323449 (I420), aspect ratio 4:3
[00000283] main video output debug: picture out 352x480, chroma 0x30323449 (I420), aspect ratio 4:3
[00000283] main video output debug: direct render, mapping render pictures 0-6 to system pictures 1-7
[00000228] main input debug: thread 139526384 (input) created at priority 20 (src/input/input.c:228)
[00000284] main private debug: Registering subpicture channel, ID: 2
[00000284] main private debug: Registering subpicture channel, ID: 3
[00000284] main private debug: Registering subpicture channel, ID: 4
[00000284] main private debug: Registering subpicture channel, ID: 5
[00000283] main video output debug: thread 139157264 (video output) created at priority 30 (src/video_output/video_output.c:443)