VLC 2.0.4 DVB-T problem

[FraggleRock]

Hello All,

I'm a old VLC user for videos and TV with my Cinergy 1400 DVB-T Tuner card from Terratec.
With VLC 2.0.0 everything is fine, i use a dvb-t playlist and all channels display very well even HD channels.
Yesterday i tried 2.0.4 version just to check if it's possible to record only one channel and not all the transponder flow.

With this new version DVB-T with the same playlist is not watchable, there are 1 seond lag every 2 seconds with son and image. All videos are normal.
If i install back version 2.0.0, everything is working. I use windows 64 with VLC 32.
I have a asustek motherboad with no Asus tool installed (i mean optimization tool who causes troubles).
Reception is very good and is maximum if i believe Terratec home theater.

So i wonder if there are specials settings for this new version to be able to display correctly DVB-T broadcasts.

Do i have to modify my playlist which looks like as follow :
#EXTM3U
#EXTINF:-1,TF1 HD
#EXTVLCOPT:program=1281
dvb-t://frequency=698166000
#EXTINF:-1,TF1
#EXTVLCOPT:program=1537
dvb-t://frequency=674166000
#EXTINF:-1,France 2 HD
#EXTVLCOPT:program=1282
dvb-t://frequency=698166000
#EXTINF:-1,France 2
#EXTVLCOPT:program=257
dvb-t://frequency=690166000

Or do i have to do something else to get VLC works with my DVB-T card and my computer.

Thank for your help.

[Lotesdelere]

i tried 2.0.4 version just to check if it's possible to record only one channel and not all the transponder flow.

To record only the current program you need to use either the "--no-input-record-native" parameter or to go to Tools -> Preferences (Show settings = All) -> Input/Codecs then on the right panel scroll down to Advanced -> Prefer native stream recording and untick this option, then save, exit and restart VLC.

With this new version DVB-T with the same playlist is not watchable, there are 1 seond lag every 2 seconds with son and image. All videos are normal.
If i install back version 2.0.0, everything is working. I use windows 64 with VLC 32.

Please open Tools -> Messages (set Verbosity to 2) before you start the playback and then paste the full resulting log here or on Pastebin.com if it's too long.
Do it with both VLC versions 2.0.0 and 2.0.4.

[FraggleRock]

Hi, thank you for your answer, i think you are French as i'm.

Is there as scheduler to program recordings with VLC ?

Here's what happend with TF1HD and version 2.0.0 :
http://pastebin.com/YsrcFCqe

And here's what happend with VLC 2.0.4 and the same broadcast
http://pastebin.com/vxexPW3a

Thank you again

[rvs75]

For viewing DVBT, the most stable version is 1.1.9.
Versions 1.1.10 and 1.1.11 are better and they can be used, but you need to replace "libpostproc_plugin.dll" in "plugins" by the 1.1.9 version.

Pour la TNT, la version 1.1.9 est la plus stable.
Les version 1.1.10 et 1.1.11sont meilleures et peuvent être utilisées mais en remplaçant la dll "libpostproc_plugin.dll" du répertoire "plugins" par celle de la version 1.1.9

[FraggleRock]

DVB-T works very well with version 2.0.0 so in my case i need'nt downgrade VLC.

With version 2.0.4 it "works" but with unsupportable lags on video and sound and video is never in the right aspect ratio, often in 4:3.
Everytime i change channel i have to redefine aspect ratio.
So at the end i wonder if new version 2.0.4 is good enough to spend time on making DVB-T working ?
Nevertheless i'd like to see this new version work correctly.

Someone knows if there is a plugin to schedule records ?

Regards

[rvs75]

Someone knows if there is a plugin to schedule records ?

http://msdn.microsoft.com/en-us/library ... 56979.aspx

[FraggleRock]

Thank you rvs75,

Somebody have an idea about DVB-T problem with version 2.0.4 ?
The logs are useful ?

Regards

[rvs75]

Je fait de la veille pour un programme que j'ai écrit (http://zviewtv.codeplex.com/) qui permet principalement de regarder la TNT bien qu'il soit capable de lire à peu près tout, à partir que c'est dans une playlist.

Bah...pour l'instant, la branche 2.0.X... pour la TNT, c'est pas ça !

La meilleure solution, je l'ai donné quelques posts plus haut CAD la version 1.1.11 avec "libpostproc_plugin.dll" de la 1.1.9.
Je suis un peu en stand-by à cause cela, et aussi que j'ai codé un scanner pour le dvb-t (http://img255.imageshack.us/img255/7892 ... icroso.png)

[Jean-Baptiste Kempf]

Bah...pour l'instant, la branche 2.0.X... pour la TNT, c'est pas ça !

Oui, mais dire ça, c'est trop vague pour aider qui que ce soit...