Projector vs. Monitor Output

*nix specific usage questions
hdvprojection
Blank Cone
Blank Cone
Posts: 11
Joined: 17 Jul 2010 21:57

Projector vs. Monitor Output

Postby hdvprojection » 25 Aug 2012 13:24

I had posted my question in a similar thread in the Windows forum, with only a little bit of luck, so I thought I'd try here in Linux.

I'm on Ubuntu (12.04 currently), and should remain so on future installs implementing what I'm asking about here. Nvidia has been buggy, so I anticipate going ATI across the board.

What I'm looking for is splitting output from any given video file, where if the signal goes out of the #1 HDMI port to the projector, one only sees either black screen and silence or the video's contents... no mouse pointer, window border, no menus or dialogs, no nothing. Period. Meanwhile, from HDMI #2 (or DVI-D, or what-have-you) monitor output would include window borders and all of the rest, preferably some videoplaylist application that can call up VLC to play out of the projector.

How do I do this? I was successful in the past using my tower as a player (with VLC) on several gigs, but the projector was my monitor, and it only worked because I had scripted the procedure, and simply undoused my projector at showtime. If anything had not gone right, I would have had to allow the audience to see everything I was doing to correct the situation on-screen. That's unacceptable, of course, and I'd like to make sure this never happens.

Unfortunately I can't really give hardware info, as I'm discussing a hypothetical machine for dedicated use. But I suppose we could just as easily discuss this machine I'm on here:

Code: Select all

:~$ sudo lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation H67 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01) 02:00.0 Multimedia video controller: Blackmagic Design Device a11b 03:00.0 Network controller: Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
Thanks in advance for any help you can give.

hdvprojection
Blank Cone
Blank Cone
Posts: 11
Joined: 17 Jul 2010 21:57

Re: Projector vs. Monitor Output

Postby hdvprojection » 27 Aug 2012 10:48

Wait a second... doesn't one solve this problem with two graphics cards? Or the onboard as well as a PCI card? Linux can utilize two at the same time, correct? If so, then how would VLC select output?

Jean-Baptiste Kempf
Site Administrator
Site Administrator
Posts: 37523
Joined: 22 Jul 2005 15:29
VLC version: 4.0.0-git
Operating System: Linux, Windows, Mac
Location: Cone, France
Contact:

Re: Projector vs. Monitor Output

Postby Jean-Baptiste Kempf » 27 Aug 2012 12:30

Just split the video from the interface and set the fullscreen monitor.
Jean-Baptiste Kempf
http://www.jbkempf.com/ - http://www.jbkempf.com/blog/category/Videolan
VLC media player developer, VideoLAN President and Sites administrator
If you want an answer to your question, just be specific and precise. Don't use Private Messages.

hdvprojection
Blank Cone
Blank Cone
Posts: 11
Joined: 17 Jul 2010 21:57

Re: Projector vs. Monitor Output

Postby hdvprojection » 29 Aug 2012 07:12

That seems easier said than done. I've never had a setup which did not "leak" artifacts onto the projector image... mouse pointer, cursor, window frame, etc. I literally want either completely black screen or the video output and absolutely nothing else. At the same time I want to see EVERYTHING on the monitor. How can I guarantee that? Thanks.

hdvprojection
Blank Cone
Blank Cone
Posts: 11
Joined: 17 Jul 2010 21:57

Re: Projector vs. Monitor Output

Postby hdvprojection » 31 Aug 2012 08:58

I need to ask again: Isn't the easiest solution just having two graphics cards?

Jean-Baptiste Kempf
Site Administrator
Site Administrator
Posts: 37523
Joined: 22 Jul 2005 15:29
VLC version: 4.0.0-git
Operating System: Linux, Windows, Mac
Location: Cone, France
Contact:

Re: Projector vs. Monitor Output

Postby Jean-Baptiste Kempf » 07 Sep 2012 18:46

Two graphic cards needs 2 X setup,but it will work.
However, I do see the need for that.
Jean-Baptiste Kempf
http://www.jbkempf.com/ - http://www.jbkempf.com/blog/category/Videolan
VLC media player developer, VideoLAN President and Sites administrator
If you want an answer to your question, just be specific and precise. Don't use Private Messages.

hdvprojection
Blank Cone
Blank Cone
Posts: 11
Joined: 17 Jul 2010 21:57

Re: Projector vs. Monitor Output

Postby hdvprojection » 09 Sep 2012 03:35

Can you refer me to any informative threads or howtos? Thanks.

hdvprojection
Blank Cone
Blank Cone
Posts: 11
Joined: 17 Jul 2010 21:57

Re: Projector vs. Monitor Output

Postby hdvprojection » 10 Oct 2012 13:06

Bump.

Jean-Baptiste Kempf
Site Administrator
Site Administrator
Posts: 37523
Joined: 22 Jul 2005 15:29
VLC version: 4.0.0-git
Operating System: Linux, Windows, Mac
Location: Cone, France
Contact:

Re: Projector vs. Monitor Output

Postby Jean-Baptiste Kempf » 10 Oct 2012 13:49

export the DISPLAY variable...
Jean-Baptiste Kempf
http://www.jbkempf.com/ - http://www.jbkempf.com/blog/category/Videolan
VLC media player developer, VideoLAN President and Sites administrator
If you want an answer to your question, just be specific and precise. Don't use Private Messages.

hdvprojection
Blank Cone
Blank Cone
Posts: 11
Joined: 17 Jul 2010 21:57

Re: Projector vs. Monitor Output

Postby hdvprojection » 14 Oct 2012 07:54

What does that mean? I'm still a newb in many ways...


Return to “VLC media player for Linux and friends Troubleshooting”

Who is online

Users browsing this forum: No registered users and 19 guests