A 1234 port shows up, as shown in the netstat log, but when I stream from the GUI it shows three entries.
Any ideas?
This is running on Ubuntu 10.04.
Thanks,
--Bob
Code: Select all
NETSTAT LOG USING COMMAND LINE
--------------------------------------------
tcp 0 0 0.0.0.0:1234 0.0.0.0:* LISTEN 2900/vlc
NETSTAT LOG USING GUI
-------------------------------
tcp 0 0 0.0.0.0:1234 0.0.0.0:* LISTEN 3362/vlc
tcp 0 0 192.168.1.109:1234 192.168.1.107:4369 ESTABLISHED 3362/vlc
tcp6 0 0 :::1234 :::* LISTEN 3362/vlc
COMMAND LINE
-----------
cvlc v4l2:///dev/video0 --v4l2-input 1 -vvv --file-logging --logfile="./vlc.log" --dvb-caching 2000 --dvb-frequency=11524000 --dvb-srate=12000000 --dvb-voltage=13 --sout '#transcode{vcodec=WMV2,acodec=wma2,vb=800,ab=128,channels=2,samplerate=44100}:standard{access=http,mux=asf,dst=:1234/}'
LOG
-----------
-- logger module started --
main debug: using interface module "logger"
main debug: TIMER module_need() : 18.594 ms - Total 18.594 ms / 1 intvls (Avg 18.594 ms)
main debug: adding item `v4l2:///dev/video0' ( v4l2:///dev/video0 )
main debug: looking for interface module: 1 candidate
main debug: using interface module "signals"
main debug: TIMER module_need() : 0.969 ms - Total 0.969 ms / 1 intvls (Avg 0.969 ms)
main debug: looking for interface module: 1 candidate
main debug: using interface module "globalhotkeys"
main debug: TIMER module_need() : 3.663 ms - Total 3.663 ms / 1 intvls (Avg 3.663 ms)
main debug: looking for interface module: 1 candidate
dummy: using the dummy interface module...
main debug: using interface module "dummy"
main debug: TIMER module_need() : 0.947 ms - Total 0.947 ms / 1 intvls (Avg 0.947 ms)
main debug: processing request item null node Playlist skip 0
main debug: rebuilding array of current - root Playlist
main debug: rebuild done - 1 items, index -1
main debug: starting new item
main debug: creating new input thread
main debug: Creating an input for 'v4l2:///dev/video0'
main debug: thread (input) created at priority 10 (input/input.c:214)
main debug: thread started
main debug: using sout chain=`transcode{vcodec=WMV2,acodec=wma2,vb=800,ab=128,channels=2,samplerate=44100}:standard{access=http,mux=asf,dst=:1234/}'
main debug: stream=`standard'
main debug: looking for sout stream module: 1 candidate
main debug: set config option: sout-standard-access to http
main debug: set config option: sout-standard-mux to asf
main debug: set config option: sout-standard-dst to :1234/
stream_out_standard debug: creating `http/asf://:1234/'
stream_out_standard debug: using `http/asf://:1234/'
main debug: looking for sout access module: 1 candidate
main: creating httpd
main debug: net: listening to port 1234
main debug: using sout access module "access_output_http"
main debug: TIMER module_need() : 9.411 ms - Total 9.411 ms / 1 intvls (Avg 9.411 ms)
stream_out_standard debug: access opened
main debug: looking for sout mux module: 1 candidate
mux_asf debug: asf muxer opened
mux_asf debug: Packet size 4096
mux_asf debug: meta data: title='', author='', copyright='', comment='', rating=''
main debug: using sout mux module "mux_asf"
main debug: TIMER module_need() : 1.348 ms - Total 1.348 ms / 1 intvls (Avg 1.348 ms)
stream_out_standard debug: mux opened
main debug: using sout stream module "stream_out_standard"
main debug: TIMER module_need() : 12.744 ms - Total 12.744 ms / 1 intvls (Avg 12.744 ms)
main debug: stream=`transcode'
main debug: looking for sout stream module: 1 candidate
main debug: set config option: sout-transcode-vcodec to WMV2
main debug: set config option: sout-transcode-acodec to wma2
main debug: set config option: sout-transcode-vb to 800
main debug: set config option: sout-transcode-ab to 128
main debug: set config option: sout-transcode-channels to 2
main debug: set config option: sout-transcode-samplerate to 44100
stream_out_transcode debug: codec audio=wma2 44100Hz 2 channels 128Kb/s
stream_out_transcode debug: codec video=WMV2 0x0 scaling: 0.000000 800kb/s
main debug: using sout stream module "stream_out_transcode"
main debug: TIMER module_need() : 2.635 ms - Total 2.635 ms / 1 intvls (Avg 2.635 ms)
main debug: using timeshift granularity of 50 MiB
main debug: using timeshift path '/tmp'
main debug: `v4l2:///dev/video0' gives access `v4l2' demux `' path `/dev/video0'
main debug: creating demux: access='v4l2' demux='' path='/dev/video0'
main debug: looking for access_demux module: 1 candidate
v4l2 debug: Trying direct kernel v4l2
v4l2 debug: opening device '/dev/video0'
v4l2 debug: V4L2 device: Hauppauge WinTV-HVR1150 ATSC/QA using driver: saa7134 (version: 0.2.16) on PCI:0000:05:00.0
v4l2 debug: the device has the capabilities: (X) Video Capture, ( ) Audio, (X) Tuner, ( ) Radio
v4l2 debug: supported I/O methods are: (X) Read/Write, (X) Streaming, ( ) Asynchronous
v4l2 debug: device supports raw VBI capture
v4l2 debug: video input 0 (Television) has type: Tuner adapter
v4l2 debug: video input 1 (Composite1) has type: External analog input *
v4l2 debug: video input 2 (S-Video) has type: External analog input
v4l2 debug: video standard 0 is: NTSC
v4l2 debug: video standard 1 is: NTSC-M
v4l2 debug: video standard 2 is: NTSC-M-JP
v4l2 debug: video standard 3 is: NTSC-M-KR
v4l2 debug: video standard 4 is: PAL
v4l2 debug: video standard 5 is: PAL-BG
v4l2 debug: video standard 6 is: PAL-H
v4l2 debug: video standard 7 is: PAL-I
v4l2 debug: video standard 8 is: PAL-DK
v4l2 debug: video standard 9 is: PAL-M
v4l2 debug: video standard 10 is: PAL-N
v4l2 debug: video standard 11 is: PAL-Nc
v4l2 debug: video standard 12 is: PAL-60
v4l2 debug: video standard 13 is: SECAM
v4l2 debug: video standard 14 is: SECAM-B
v4l2 debug: video standard 15 is: SECAM-G
v4l2 debug: video standard 16 is: SECAM-H
v4l2 debug: video standard 17 is: SECAM-DK
v4l2 debug: video standard 18 is: SECAM-L
v4l2 debug: video standard 19 is: SECAM-Lc
v4l2 debug: tuner 0 (Television) has type: Analog TV, frequency range: 0.0 kHz -> 268435455937.5 kHz
v4l2 debug: tuner 0 (Television) frequency: 0.0 kHz
v4l2 debug: device supports chroma GREY [8 bpp gray, GREY]
v4l2 warning: Unable to query for frame sizes
v4l2 debug: device supports chroma RV15 [15 bpp RGB, le, RGBO]
v4l2 warning: Unable to query for frame sizes
v4l2 debug: device codec RGBQ (15 bpp RGB, be) not supported
v4l2 debug: device supports chroma RV16 [16 bpp RGB, le, RGBP]
v4l2 warning: Unable to query for frame sizes
v4l2 debug: device codec RGBR (16 bpp RGB, be) not supported
v4l2 debug: device supports chroma RV24 [24 bpp RGB, le, BGR3]
v4l2 warning: Unable to query for frame sizes
v4l2 debug: device supports chroma RV24 [24 bpp RGB, be, RGB3]
v4l2 warning: Unable to query for frame sizes
v4l2 debug: device supports chroma RV32 [32 bpp RGB, le, BGR4]
v4l2 warning: Unable to query for frame sizes
v4l2 debug: device supports chroma RV32 [32 bpp RGB, be, RGB4]
v4l2 warning: Unable to query for frame sizes
v4l2 debug: device supports chroma YUY2 [4:2:2 packed, YUYV, YUYV]
v4l2 warning: Unable to query for frame sizes
v4l2 debug: device supports chroma UYVY [4:2:2 packed, UYVY, UYVY]
v4l2 warning: Unable to query for frame sizes
v4l2 debug: device supports chroma I422 [4:2:2 planar, Y-Cb-Cr, 422P]
v4l2 warning: Unable to query for frame sizes
v4l2 debug: device supports chroma I420 [4:2:0 planar, Y-Cb-Cr, YU12]
v4l2 warning: Unable to query for frame sizes
v4l2 debug: device supports chroma YV12 [4:2:0 planar, Y-Cb-Cr, YV12]
v4l2 warning: Unable to query for frame sizes
v4l2 debug: '/dev/video0' is a video device
v4l2 debug: Extended control API not supported by v4l2 driver
v4l2 debug: Available control: Brightness (980900)
v4l2 debug: integer control
v4l2 debug: valid values: 0 to 255 by steps of 1
v4l2 debug: default value: 128
v4l2 debug: current value: 128
v4l2 debug: Available control: Contrast (980901)
v4l2 debug: integer control
v4l2 debug: valid values: 0 to 127 by steps of 1
v4l2 debug: default value: 68
v4l2 debug: current value: 68
v4l2 debug: Available control: Saturation (980902)
v4l2 debug: integer control
v4l2 debug: valid values: 0 to 127 by steps of 1
v4l2 debug: default value: 64
v4l2 debug: current value: 64
v4l2 debug: Available control: Hue (980903)
v4l2 debug: integer control
v4l2 debug: valid values: -128 to 127 by steps of 1
v4l2 debug: default value: 0
v4l2 debug: current value: 0
v4l2 debug: Available control: Volume (980905)
v4l2 debug: integer control
v4l2 debug: valid values: -15 to 15 by steps of 1
v4l2 debug: default value: 0
v4l2 debug: current value: 0
v4l2 debug: Available control: Mute (980909)
v4l2 debug: boolean control
v4l2 debug: default value: 0
v4l2 debug: current value: 0
v4l2 debug: video audio-mute: 0
v4l2 debug: Available control: Mirror (980914)
v4l2 debug: boolean control
v4l2 debug: default value: 0
v4l2 debug: current value: 0
v4l2 debug: Available private control: Invert (8000000)
v4l2 debug: boolean control
v4l2 debug: default value: 0
v4l2 debug: current value: 0
v4l2 debug: Available private control: y offset odd field (8000001)
v4l2 debug: integer control
v4l2 debug: valid values: 0 to 128 by steps of 1
v4l2 debug: default value: 0
v4l2 debug: current value: 0
v4l2 debug: Available private control: y offset even field (8000002)
v4l2 debug: integer control
v4l2 debug: valid values: 0 to 128 by steps of 1
v4l2 debug: default value: 0
v4l2 debug: current value: 0
v4l2 debug: Available private control: automute (8000003)
v4l2 debug: boolean control
v4l2 debug: default value: 1
v4l2 debug: current value: 1
v4l2 debug: using streaming i/o (mmap)
v4l2 debug: found default width and height of 720x576
v4l2 debug: will try to find optimal width and height.
v4l2 debug: Found maximum framerate of -1.000000
v4l2 warning: Could not find optimal width and height, falling back to driver default.
v4l2 debug: Driver requires at most 518400 bytes to store a complete image
v4l2 debug: Interlacing setting: interleaved (bottom top if M/NTSC, top bottom otherwise)
v4l2 debug: added new video es I420 720x480
main debug: selecting program id=0
main debug: using access_demux module "v4l2"
main debug: TIMER module_need() : 19.704 ms - Total 19.704 ms / 1 intvls (Avg 19.704 ms)
main debug: looking for packetizer module: 21 candidates
rawvideo warning: invalid frame rate 0/0, using 25 fps instead
main debug: using packetizer module "rawvideo"
main debug: TIMER module_need() : 9.531 ms - Total 9.531 ms / 1 intvls (Avg 9.531 ms)
main debug: thread (decoder) created at priority 0 (input/decoder.c:301)
main debug: thread started
main debug: starting in async mode
main debug: looking for meta reader module: 2 candidates
lua debug: Trying Lua scripts in /home/ubuntu/.local/share/vlc/lua/meta/reader
lua debug: Trying Lua scripts in /usr/lib/vlc/lua/meta/reader
lua debug: Trying Lua playlist script /usr/lib/vlc/lua/meta/reader/filename.luac
lua debug: Trying Lua scripts in /usr/share/vlc/lua/meta/reader
main debug: no meta reader module matching "any" could be loaded
main debug: TIMER module_need() : 2.605 ms - Total 2.605 ms / 1 intvls (Avg 2.605 ms)
main debug: `v4l2:///dev/video0' successfully opened
main debug: Buffering 0%
main debug: switching to sync mode
main debug: adding a new sout input (sout_input:0x8644890)
stream_out_transcode debug: creating video transcoding from fcc=`I420' to fcc=`WMV2'
main debug: looking for decoder module: 30 candidates
main debug: Buffering 66%
rawvideo warning: invalid frame rate 0/0, using 25 fps instead
main debug: using decoder module "rawvideo"
main debug: TIMER module_need() : 40.048 ms - Total 40.048 ms / 1 intvls (Avg 40.048 ms)
main debug: looking for encoder module: 11 candidates
avcodec debug: libavcodec initialized (interface 0x344802)
avcodec debug: found encoder Windows Media Video 8
main debug: using encoder module "avcodec"
main debug: TIMER module_need() : 12.258 ms - Total 12.258 ms / 1 intvls (Avg 12.258 ms)
main debug: removing module "avcodec"
main debug: Stream buffering done (66 ms in 66 ms)
main debug: Decoder buffering done in 0 ms
stream_out_transcode debug: late picture skipped (42088)
stream_out_transcode debug: late picture skipped (10234)
stream_out_transcode debug: decoder aspect is 1.333333:1
stream_out_transcode debug: source pixel aspect is 0.888889:1
stream_out_transcode debug: scaled pixel aspect is 0.888889:1
stream_out_transcode debug: source 720x480, destination 720x480
stream_out_transcode debug: encoder aspect is 5760:4320
stream_out_transcode debug: destination (after video filters) 720x480
main debug: looking for encoder module: 11 candidates
avcodec debug: libavcodec already initialized
avcodec debug: found encoder Windows Media Video 8
main debug: using encoder module "avcodec"
main debug: TIMER module_need() : 6.948 ms - Total 6.948 ms / 1 intvls (Avg 6.948 ms)
main debug: adding a new input
mux_asf debug: adding input
main warning: late buffer for mux input (33160)
stream_out_transcode debug: late picture skipped (78074)
stream_out_transcode debug: late picture skipped (46549)
stream_out_transcode debug: late picture skipped (13802)
stream_out_transcode debug: late picture skipped (574)
stream_out_transcode debug: late picture skipped (687)
stream_out_transcode debug: late picture skipped (866)
stream_out_transcode debug: late picture skipped (551)
stream_out_transcode debug: late picture skipped (690)
stream_out_transcode debug: late picture skipped (562)
stream_out_transcode debug: late picture skipped (813)
stream_out_transcode debug: late picture skipped (1005)
stream_out_transcode debug: late picture skipped (954)
stream_out_transcode debug: late picture skipped (971)
stream_out_transcode debug: late picture skipped (751)