The VideoLAN Forums

Discussion and support for VLC media player and friends

Skip to content

Bad desktop audio capture quality

About encoding, codec settings, muxers and filter usage
Post Reply
Wallboy
Blank Cone
Blank Cone
Posts: 10
Joined: 20 Apr 2010 08:53

Bad desktop audio capture quality

Postby Wallboy » 18 Oct 2010 04:45

I'm trying to capture my Stereo Mix on my Omega Striker soundcard and I can get it to capture, but the quality sounds terrible. Here's my current command line (VLC 1.1.4):

"C:\Program Files (x86)\VideoLAN\VLC\vlc.exe" -vvv -I oldrc dshow:// --dshow-vdev "None" --dshow-adev "Stereo Mix (HTO STRIKER 7.1)" --dshow-audio-channels 2 --dshow-audio-samplerate 44100 --dshow-audio-bitspersample 16 --dshow-caching 200 --sout="#transcode{venc=x264{preset=fast,tune=film,profile=baseline,level=3.0,keyint=350,bframes=0,ref=2,weightp=0,scenecut=40,cabac=0,qpmin=1,qpmax=51,qcomp=0.6,ratetol=0.01,vbv-maxrate=1200,vbv-bufsize=600},vcodec=h264,vb=1200,scale=1,audio-sync,acodec=mp3,ab=128,channels=2,samplerate=44100}:standard{access=file,mux=ts,dst="C:\jtv\screen.ts"}"

Ignore the video transcode settings. What might be the problem? I'm tryed various codecs as well (mp3, mpga, mp4a, etc) Couldm't get a log saved out through command line, so I just reproduced the same audio settings within GUI and get the same result. Here's the log from that:

Code: Select all

qt4 debug: MRL passed to the Sout: dshow:// qt4 debug: Adding option: dshow-vdev=none qt4 debug: Adding option: dshow-adev=Stereo Mix (HTO STRIKER 7.1) qt4 debug: Adding option: dshow-caching=200 qt4 debug: Adding option: dshow-vdev= qt4 debug: Adding option: dshow-adev= qt4 debug: Adding option: dshow-size= qt4 debug: Adding option: dshow-aspect-ratio=4:3 qt4 debug: Adding option: dshow-chroma= qt4 debug: Adding option: dshow-fps=0 qt4 debug: Adding option: no-dshow-config qt4 debug: Adding option: no-dshow-tuner qt4 debug: Adding option: dshow-tuner-channel=0 qt4 debug: Adding option: dshow-tuner-country=0 qt4 debug: Adding option: dshow-tuner-input=0 qt4 debug: Adding option: dshow-video-input=-1 qt4 debug: Adding option: dshow-video-output=-1 qt4 debug: Adding option: dshow-audio-input=-1 qt4 debug: Adding option: dshow-audio-output=-1 qt4 debug: Adding option: dshow-amtuner-mode=1 qt4 debug: Adding option: dshow-audio-channels=2 qt4 debug: Adding option: dshow-audio-samplerate=44100 qt4 debug: Adding option: dshow-audio-bitspersample=16 qt4 debug: Adding option: dshow-caching=200 qt4 debug: Adding option: :sout=#transcode{vcodec=h264,vb=0,scale=0,acodec=mp4a,ab=128,channels=2,samplerate=44100}:file{dst=test.mp4} qt4 debug: Adding option: no-sout-rtp-sap qt4 debug: Adding option: no-sout-standard-sap qt4 debug: Adding option: sout-keep main debug: adding item `Streaming' ( dshow:// ) main debug: rebuilding array of current - root Playlist main debug: rebuild done - 3 items, index 1 main debug: processing request item Streaming node Playlist skip 0 main debug: resyncing on Streaming main debug: Streaming is at 2 main debug: starting new item main debug: creating new input thread main debug: Creating an input for 'Streaming' main debug: thread started main debug: thread (input) created at priority 1 (../.././src/input/input.c:214) main debug: reusing sout main debug: you probably want to use gather stream_out main debug: using timeshift granularity of 50 MiB main debug: using timeshift path 'C:\Users\Wallboy\AppData\Local\Temp' main debug: `dshow://' gives access `dshow' demux `' path `' main debug: creating demux: access='dshow' demux='' path='' main debug: looking for access_demux module: 1 candidate dshow debug: dshow-vdev: none dshow debug: dshow-adev: Stereo Mix (HTO STRIKER 7.1) dshow debug: skipping video device dshow debug: found device: Aux (HTO STRIKER 7.1) dshow debug: found device: CD Player (HTO STRIKER 7.1) dshow debug: found device: Line 1 (Virtual Audio Cable) dshow debug: found device: Line In (HTO STRIKER 7.1) dshow debug: found device: Microphone (HTO STRIKER 7.1) dshow debug: found device: SPDIF In (HTO STRIKER 7.1) dshow debug: found device: Stereo Mix (HTO STRIKER 7.1) dshow debug: asking for device: Stereo Mix (HTO STRIKER 7.1) dshow debug: asked for Stereo Mix (HTO STRIKER 7.1), binding to Stereo Mix (HTO STRIKER 7.1) dshow debug: using device: Stereo Mix (HTO STRIKER 7.1) dshow debug: EnumDeviceCaps: output pin: Capture dshow debug: EnumDeviceCaps: input pin: Master Volume dshow debug: EnumDeviceCaps: trying pin Capture qt4 debug: IM: Setting an input dshow debug: EnumDeviceCaps: input pin default format configured dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:44100 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:44100 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:44100 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:32000 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:32000 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:22050 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:22050 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:11025 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:11025 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:8000 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:8000 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:44100 bits/sample:8 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:44100 bits/sample:8 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:22050 bits/sample:8 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:22050 bits/sample:8 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:11025 bits/sample:8 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:11025 bits/sample:8 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:8000 bits/sample:8 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:8000 bits/sample:8 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:48000 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:48000 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:96000 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:96000 bits/sample:16 dshow debug: CaptureFilter::JoinFilterGraph dshow debug: connecting filters dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::ConnectedTo [not connected] dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::QueryFilterInfo dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::QueryAccept [OK] (channels=2, samples/sec=44100, bits/samples=16, format=araw) dshow debug: CapturePin::ReceiveConnection [OK] dshow debug: CapturePin::NotifyAllocator dshow debug: filters connected successfully ! dshow debug: MEDIATYPE_Audio dshow debug: selected audio pin accepts format: araw dshow debug: Playing... dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::ConnectedTo [OK] dshow debug: CaptureFilter::SetSyncSource dshow debug: CaptureFilter::Pause dshow debug: CaptureFilter::Run main debug: selecting program id=0 main debug: using access_demux module "dshow" main debug: TIMER module_need() : 260.000 ms - Total 260.000 ms / 1 intvls (Avg 260.000 ms) main debug: looking for packetizer module: 21 candidates main debug: using packetizer module "packetizer_copy" main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms) main debug: thread (decoder) created at priority 2 (../.././src/input/decoder.c:301) main debug: thread started main debug: starting in sync mode main debug: looking for meta reader module: 2 candidates lua debug: Trying Lua scripts in C:\Users\Wallboy\AppData\Roaming\vlc\lua\meta\reader lua debug: Trying Lua scripts in C:\Program Files (x86)\VideoLAN\VLC4\lua\meta\reader lua debug: Trying Lua playlist script C:\Program Files (x86)\VideoLAN\VLC4\lua\meta\reader\filename.lua main debug: no meta reader module matching "any" could be loaded main debug: TIMER module_need() : 1.000 ms - Total 1.000 ms / 1 intvls (Avg 1.000 ms) main debug: `dshow://' successfully opened main error: Invalid PCR value in ES_OUT_SET_(GROUP_)PCR ! main debug: switching to async mode packetizer_copy debug: need valid dts main debug: Buffering 0% main debug: Buffering 50% main debug: adding a new sout input (sout_input:033fef48) stream_out_transcode debug: creating audio transcoding from fcc=`s16l' to fcc=`mp4a' main debug: looking for decoder module: 34 candidates araw debug: samplerate:44100Hz channels:2 bits/sample:16 main debug: using decoder module "araw" main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms) main debug: looking for encoder module: 12 candidates avcodec debug: libavcodec already initialized avcodec debug: found encoder MPEG AAC Audio main debug: using encoder module "avcodec" main debug: TIMER module_need() : 2.000 ms - Total 2.000 ms / 1 intvls (Avg 2.000 ms) main error: cannot add a new stream (unsupported while muxing to this format). You can try increasing sout-mux-caching value main debug: removing module "araw" main debug: removing module "avcodec" main error: cannot create packetizer output (s16l) main debug: Buffering 100% main debug: Stream buffering done (300 ms in 300 ms) main debug: Decoder buffering done in 0 ms
Last edited by Wallboy on 19 Oct 2010 01:11, edited 2 times in total.
Top
Rémi Denis-Courmont
Developer
Developer
Posts: 15267
Joined: 07 Jun 2004 16:01
VLC version: master
Operating System: Linux
Contact:
Contact Rémi Denis-Courmont

Re: Bad desktop audio capture quality

Postby Rémi Denis-Courmont » 18 Oct 2010 19:21

Did you try 48000 Hz? Many recent cheap audio PC hardware sucks at 11025 Hz and multiple thereof.
Rémi Denis-Courmont
https://www.remlab.net/
Private messages soliciting support will be systematically discarded
Top
Wallboy
Blank Cone
Blank Cone
Posts: 10
Joined: 20 Apr 2010 08:53

Re: Bad desktop audio capture quality

Postby Wallboy » 19 Oct 2010 01:29

Yeah I've tried that as well. I got it working sort of though. If something is already playing and I start the command line script, it works fine. If I start the script and then start playing something, it distorts.

Edit: Well now it's just random. Sometimes it will sound terrible, the next time it will sound perfect... :?

Maybe it's my output settings and mux and it's corrupting the file. I'm not sure what I should be using here.
Top
Post Reply

Return to “VLC stream-output (sout)”

Who is online

Users browsing this forum: No registered users and 10 guests

Powered by phpBB® Forum Software © phpBB Limited
GZIP: On