Streaming from Dreambox to VLC 1.1.0 doesn't work

[amar]

NOTE BY ADMIN: update to VLC 1.1.2 to fix this issue


I have two Dreamboxes DM800 PVR, one with a sattelite tuner and the other with a cable tuner. I watch TV on the PC using the Streaming-Technology. The Stream goes from the Dreambox to the PC where it is played with the VLC Player.

This works fine for the following versions of VLC:
- 0.9.6
- 0.9.8a
- 0.9.9
- 1.0.0
- 1.0.2
- 1.0.3
- 1.0.5

But it doesn't work with the following versions
- 1.1.0-rc
- 1.1.0

I did not test other versions than the ones mentioned.

If I set the debug-level of vlc 1.1.0 to the value 2, it prints the following lines when I try to start Streaming and stop again:

main info: stopping playback
main debug: deleting item `http://192.167.1.10:8001/1:0:1:3AFD:323 ... 0000:0:0:0:'
oldhttp debug: requested playlist empty
main debug: rebuilding array of current - root Wiedergabeliste
main debug: rebuild done - 0 items, index -1
main debug: adding item `http://192.167.1.10:8001/1:0:1:3AFD:323 ... 0000:0:0:0:' ( http://192.167.1.10:8001/1:0:1:3AFD:323 ... 0000:0:0:0: )
main debug: rebuilding array of current - root Wiedergabeliste
main debug: rebuild done - 1 items, index -1
oldhttp debug: requested mrl add: http://192.167.1.10:8001/1:0:1:3AFD:323 ... 0000:0:0:0:
main debug: processing request item http://192.167.1.10:8001/1:0:1:3AFD:323 ... 0000:0:0:0: node Wiedergabeliste skip 0
main debug: resyncing on http://192.167.1.10:8001/1:0:1:3AFD:323 ... 0000:0:0:0:
main debug: http://192.167.1.10:8001/1:0:1:3AFD:323 ... 0000:0:0:0: is at 0
main debug: starting new item
main debug: creating new input thread
main debug: Creating an input for 'http://192.167.1.10:8001/1:0:1:3AFD:323 ... 0000:0:0:0:'
oldhttp debug: requested playlist item: 5
main debug: thread (input) created at priority 1 (../.././src/input/input.c:214)
main debug: thread started
main debug: using timeshift granularity of 50 MiB
main debug: using timeshift path 'C:\WINDOWS\TEMP'
main debug: `http://192.167.1.10:8001/1:0:1:3AFD:323 ... 0000:0:0:0:' gives access `http' demux `' path `192.167.1.10:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:'
main debug: creating demux: access='http' demux='' path='192.167.1.10:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:'
main debug: looking for access_demux module: 0 candidates
main debug: no access_demux module matched "http"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: creating access 'http' path='192.167.1.10:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:'
main debug: looking for access module: 2 candidates
access_http debug: http: server='192.167.1.10' port=8001 file='/1:0:1:3AFD:323:4:FFFF0000:0:0:0:'
main debug: net: connecting to 192.167.1.10 port 8001
qt4 debug: IM: Setting an input
main debug: connection succeeded (socket = 260)
access_http debug: protocol 'HTTP' answer code 200
access_http debug: Connection: Close
access_http debug: Content-Type: video/mpeg
access_http debug: Server: stream_enigma2
main debug: using access module "access_http"
main debug: TIMER module_need() : 217.000 ms - Total 217.000 ms / 1 intvls (Avg 217.000 ms)
main debug: Using AStream*Stream
main debug: pre buffering
main debug: received first data after 5 ms
main debug: pre-buffering done 1024 bytes in 0s - 199 KiB/s
main debug: looking for stream_filter module: 2 candidates
main debug: no stream_filter module matching "any" could be loaded
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: looking for stream_filter module: 1 candidate
main debug: using stream_filter module "stream_filter_record"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: creating demux: access='http' demux='' path='192.167.1.10:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:'
main debug: looking for demux module: 50 candidates
main debug: using demux module "ts"
main debug: TIMER module_need() : 13.000 ms - Total 13.000 ms / 1 intvls (Avg 13.000 ms)
ts debug: DEMUX_SET_GROUP 0 00000000
main debug: looking for meta reader module: 2 candidates
lua debug: Trying Lua scripts in C:\Dokumente und Einstellungen\Default User\Anwendungsdaten\vlc\lua\meta\reader
lua debug: Trying Lua scripts in C:\Programme\VideoLAN\VLC\lua\meta\reader
lua debug: Trying Lua playlist script C:\Programme\VideoLAN\VLC\lua\meta\reader\filename.lua
main debug: no meta reader module matching "any" could be loaded
main debug: TIMER module_need() : 2.000 ms - Total 2.000 ms / 1 intvls (Avg 2.000 ms)
main debug: `http://192.167.1.10:8001/1:0:1:3AFD:323 ... 0000:0:0:0:' successfully opened
ts debug: pid[1283] unknown
ts debug: pid[259] unknown
ts debug: pid[515] unknown
ts debug: pid[106] unknown
ts debug: pid[103] unknown
ts debug: PATCallBack called
ts debug: new PAT ts_id=803 version=9 current_next=1
ts debug: * number=0 pid=16
ts debug: * number=18128 pid=100
ts debug: * number=18122 pid=130
ts debug: * number=18123 pid=140
ts debug: * number=18125 pid=410
ts debug: * number=18126 pid=420
ts debug: * number=18127 pid=450
ts debug: * number=18124 pid=460
ts debug: * number=18135 pid=530
ts debug: * number=18137 pid=540
ts debug: * number=18139 pid=550
ts debug: * number=18138 pid=560
ts debug: * number=18134 pid=610
ts debug: * number=18129 pid=620
ts debug: * number=18140 pid=630
ts debug: * number=18130 pid=710
ts debug: * number=18136 pid=850
ts debug: * number=18131 pid=900
ts debug: * number=18141 pid=1020
ts debug: * number=18147 pid=1030
ts debug: * number=18142 pid=1120
ts debug: * number=18143 pid=1140
ts debug: * number=15177 pid=1400
ts debug: * number=15101 pid=51
ts debug: * number=15104 pid=200
ts debug: * number=15171 pid=300
ts debug: * number=15161 pid=600
ts debug: * number=15103 pid=800
ts debug: * number=15139 pid=400
ts debug: * number=15168 pid=500
ts debug: PMTCallBack called
ts debug: new PMT program number=15101 version=7 pid_pcr=259
ts debug: * es pid=259 type=2 dr->i_tag=0x11
ts debug: * es pid=259 type=2 dr->i_tag=0x52
ts debug: * es pid=259 type=2 fcc=mpgv
main debug: selecting program id=15101
main debug: looking for decoder module: 34 candidates
avcodec debug: libavcodec already initialized
avcodec debug: trying to use direct rendering
avcodec debug: ffmpeg codec (MPEG-1/2 Video) started
main debug: using decoder module "avcodec"
main debug: TIMER module_need() : 1.000 ms - Total 1.000 ms / 1 intvls (Avg 1.000 ms)
main debug: looking for packetizer module: 21 candidates
main debug: using packetizer module "packetizer_mpegvideo"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: thread started
main debug: thread (decoder) created at priority 0 (../.././src/input/decoder.c:301)
ts debug: * es pid=515 type=3 dr->i_tag=0xa
ts debug: * es pid=515 type=3 dr->i_tag=0x52
ts debug: found language: deu
ts debug: * es pid=515 type=3 fcc=mpga
main debug: looking for decoder module: 34 candidates
main debug: using decoder module "mpeg_audio"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: thread started
main debug: thread (decoder) created at priority 2 (../.././src/input/decoder.c:301)
ts debug: * es pid=1283 type=6 dr->i_tag=0x52
ts debug: * es pid=1283 type=6 dr->i_tag=0x56
ts debug: * ttxt type=Teletext lan=deu page=100
ts debug: * Stream Component Identifier: 3
ts debug: * es pid=1283 type=6 fcc=telx
ts debug: * es pid=106 type=6 dr->i_tag=0xa
ts debug: * es pid=106 type=6 dr->i_tag=0x52
ts debug: * es pid=106 type=6 dr->i_tag=0x6a
ts debug: * Stream Component Identifier: 17
ts debug: found language: deu
ts debug: * es pid=106 type=6 fcc=a52
ts debug: * es pid=2073 type=5 dr->i_tag=0x6f
ts debug: * es pid=2073 type=5 *unknown*
ts debug: * es pid=103 type=3 dr->i_tag=0xa
ts debug: * es pid=103 type=3 dr->i_tag=0x52
ts debug: found language: 2ch
ts debug: * es pid=103 type=3 fcc=mpga
ts debug: * es pid=54 type=11 dr->i_tag=0x13
ts debug: * es pid=54 type=11 dr->i_tag=0x52
ts debug: * es pid=54 type=11 dr->i_tag=0x66
ts debug: * es pid=54 type=11 *unknown*
ts debug: * es pid=84 type=6 dr->i_tag=0x52
ts debug: * Stream Component Identifier: 7
ts debug: * es pid=84 type=6 *unknown*
ts warning: first packet for pid=259 cc=0x6
ts warning: first packet for pid=103 cc=0xa
ts warning: first packet for pid=515 cc=0xf
ts warning: first packet for pid=1283 cc=0xd
main debug: Buffering 0%
main debug: Buffering 2%
packetizer_mpegvideo debug: waiting for sequence start
main debug: Buffering 5%
main debug: Buffering 8%
main debug: Buffering 11%
main debug: Buffering 14%
packetizer_mpegvideo debug: waiting for sequence start
packetizer_mpegvideo debug: size 720x576 fps=25.000
main debug: Buffering 17%
main debug: no usable vout present, spawning one
main debug: looking for text renderer module: 2 candidates
freetype debug: Building font databases.
mpeg_audio debug: MPGA channels:2 samplerate:48000 bitrate:256
main debug: Buffering 20%
freetype debug: Took 7000 microseconds
main debug: Buffering 23%
freetype debug: Using Arial as font from file C:/WINDOWS/fonts/arial.ttf
freetype debug: using fontsize: 2
main debug: using text renderer module "freetype"
main debug: TIMER module_need() : 8.000 ms - Total 8.000 ms / 1 intvls (Avg 8.000 ms)
main debug: looking for video filter2 module: 18 candidates
swscale debug: 32x32 chroma: YUVA -> 16x16 chroma: YUVA with scaling using Bicubic (good quality)
main debug: using video filter2 module "swscale"
main debug: TIMER module_need() : 1.000 ms - Total 1.000 ms / 1 intvls (Avg 1.000 ms)
main debug: looking for video filter2 module: 18 candidates
yuvp debug: YUVP to YUVA converter
main debug: using video filter2 module "yuvp"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: window size: 768x432
main debug: Deinterlacing available
main debug: deinterlace 1, mode discard, is_needed 0
main debug: looking for video filter module: 1 candidate
deinterlace debug: using discard deinterlace method
main debug: using video filter module "deinterlace"
main debug: TIMER module_need() : 1.000 ms - Total 1.000 ms / 1 intvls (Avg 1.000 ms)
deinterlace debug: spawning the real video output
main debug: looking for text renderer module: 2 candidates
freetype debug: Building font databases.
freetype debug: Took 39000 microseconds
freetype debug: Using Arial as font from file C:/WINDOWS/fonts/arial.ttf
freetype debug: using fontsize: 2
main debug: using text renderer module "freetype"
main debug: TIMER module_need() : 40.000 ms - Total 40.000 ms / 1 intvls (Avg 40.000 ms)
main debug: looking for video filter2 module: 18 candidates
swscale debug: 32x32 chroma: YUVA -> 16x16 chroma: YUVA with scaling using Bicubic (good quality)
main debug: using video filter2 module "swscale"
main debug: TIMER module_need() : 1.000 ms - Total 1.000 ms / 1 intvls (Avg 1.000 ms)
main debug: looking for video filter2 module: 18 candidates
yuvp debug: YUVP to YUVA converter
main debug: using video filter2 module "yuvp"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: window size: 768x432
main debug: looking for video filter module: 1 candidate
main debug: using video filter module "crop"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
crop debug: cropping at 720x288+0+0, autocropping
crop info: ratio 1777
main debug: looking for text renderer module: 2 candidates
freetype debug: Building font databases.
freetype debug: Took 32000 microseconds
freetype debug: Using Arial as font from file C:/WINDOWS/fonts/arial.ttf
freetype debug: using fontsize: 2
main debug: using text renderer module "freetype"
main debug: TIMER module_need() : 33.000 ms - Total 33.000 ms / 1 intvls (Avg 33.000 ms)
main debug: looking for video filter2 module: 18 candidates
swscale debug: 32x32 chroma: YUVA -> 16x16 chroma: YUVA with scaling using Bicubic (good quality)
main debug: using video filter2 module "swscale"
main debug: TIMER module_need() : 1.000 ms - Total 1.000 ms / 1 intvls (Avg 1.000 ms)
main debug: looking for video filter2 module: 18 candidates
yuvp debug: YUVP to YUVA converter
main debug: using video filter2 module "yuvp"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: window size: 768x432
main debug: looking for video output module: 1 candidate
vout_wrapper debug: Opening vout display wrapper
main debug: looking for vout display module: 8 candidates
directx debug: creating Vout EventThread
directx debug: DirectXCreateWindow
main debug: looking for vout window hwnd module: 3 candidates
qt4 debug: requesting video...
qt4 debug: Video was requested 0, 0
main debug: using vout window hwnd module "qt4"
main debug: TIMER module_need() : 38.000 ms - Total 38.000 ms / 1 intvls (Avg 38.000 ms)
directx debug: created video sub-window
directx debug: Vout EventThread running
directx debug: disabling screen saver
directx debug: directx-device:
directx debug: DirectXEnumCallback: ATI Radeon X1200 Series, \\.\DISPLAY1
directx debug: selecting ATI Radeon X1200 Series, \\.\DISPLAY1
directx debug: screen dimensions (0x0,1920x1080)
directx debug: DirectDraw Capabilities: overlay=1 yuvoverlay=1 can_deinterlace_overlay=1 colorkey=1 stretch=1 bltfourcc=1
main debug: VoutDisplayEvent 'resize' 776x459 window
directx debug: YUV overlay surface created successfully
main debug: using vout display module "directx"
main debug: TIMER module_need() : 51.000 ms - Total 51.000 ms / 1 intvls (Avg 51.000 ms)
main debug: using video output module "vout_wrapper"
main debug: TIMER module_need() : 52.000 ms - Total 52.000 ms / 1 intvls (Avg 52.000 ms)
main debug: got 1 direct buffer(s)
main debug: pic render sz 720x288, of (0,0), vsz 720x288, 4cc I420, sar 32:45, msk r0x0 g0x0 b0x0
main debug: pic in sz 720x288, of (0,0), vsz 720x288, 4cc I420, sar 32:45, msk r0x0 g0x0 b0x0
main debug: pic out sz 720x288, of (0,0), vsz 720x288, 4cc I420, sar 32:45, msk r0x0 g0x0 b0x0
main debug: direct render, mapping render pictures 0-23 to system pictures 1-24
main debug: got 25 direct buffer(s)
main debug: pic render sz 720x288, of (0,0), vsz 720x288, 4cc I420, sar 32:45, msk r0x0 g0x0 b0x0
main debug: pic in sz 720x288, of (0,0), vsz 720x288, 4cc I420, sar 32:45, msk r0x0 g0x0 b0x0
main debug: pic out sz 720x288, of (0,0), vsz 720x288, 4cc I420, sar 32:45, msk r0x0 g0x0 b0x0
main debug: direct render, mapping render pictures 0-23 to system pictures 1-24
main debug: got 25 direct buffer(s)
main debug: pic render sz 720x576, of (0,0), vsz 720x576, 4cc I420, sar 64:45, msk r0x0 g0x0 b0x0
main debug: pic in sz 720x576, of (0,0), vsz 720x576, 4cc I420, sar 64:45, msk r0x0 g0x0 b0x0
main debug: pic out sz 720x576, of (0,0), vsz 720x576, 4cc I420, sar 64:45, msk r0x0 g0x0 b0x0
main debug: direct render, mapping render pictures 0-23 to system pictures 1-24
main debug: reusing aout
avcodec debug: using direct rendering
main debug: looking for audio output module: 4 candidates
aout_directx debug: Opening DirectSound Audio Output
aout_directx debug: found device: Primärer Soundtreiber
aout_directx debug: found device: Realtek HD Audio output
aout_directx debug: found device: Realtek HDA HDMI Out
main debug: VoutDisplayEvent 'resize' 768x432 window
main debug: End of video preroll
main debug: Received first picture
main debug: Post-processing available
main debug: Detected interlaced video
main debug: deinterlace 1, mode discard, is_needed 1
main warning: vlc_object_find_name(postproc) is not safe!
aout_directx debug: device supports 2 channels (DEFAULT!)
aout_directx debug: device supports 1 channel
aout_directx debug: Windows says your SpeakerConfig is stereo
aout_directx debug: creating DirectSoundThread
main debug: thread started
aout_directx debug: DirectSoundThread ready
main debug: thread (DirectSound Notification Thread) created at priority 15 (../../.././modules/audio_output/directx.c:321)
main debug: using audio output module "aout_directx"
main debug: TIMER module_need() : 47.000 ms - Total 47.000 ms / 1 intvls (Avg 47.000 ms)
main debug: output 's16l' 48000 Hz Stereo frame=1 samples/4 bytes
main debug: mixer 'f32l' 48000 Hz Stereo frame=1 samples/8 bytes
main debug: filter(s) 'f32l'->'s16l' 48000 Hz->48000 Hz Stereo->Stereo
main debug: looking for audio filter module: 14 candidates
audio_format debug: f32l->s16l, bits per sample: 32->16
main debug: using audio filter module "audio_format"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: found a filter for the whole conversion
main debug: looking for audio mixer module: 3 candidates
main debug: using audio mixer module "float32_mixer"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: input 'mpga' 48000 Hz Stereo frame=1152 samples/1161 bytes
main debug: looking for audio filter module: 1 candidate
scaletempo debug: format: 48000 rate, 2 nch, 4 bps, fl32
scaletempo debug: params: 30 stride, 0.200 overlap, 14 search
scaletempo debug: 1.000 scale, 1440.000 stride_in, 1440 stride_out, 1152 standing, 288 overlap, 672 search, 2400 queue, fl32 mode
main debug: using audio filter module "scaletempo"
main debug: TIMER module_need() : 1.000 ms - Total 1.000 ms / 1 intvls (Avg 1.000 ms)
main debug: filter(s) 'mpga'->'f32l' 48000 Hz->48000 Hz Stereo->Stereo
main debug: looking for audio filter module: 14 candidates
mpgatofixed32 debug: mpga->f32l, bits per sample: 0
main debug: using audio filter module "mpgatofixed32"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: found a filter for the whole conversion
main debug: filter(s) 'f32l'->'f32l' 52800 Hz->48000 Hz Stereo->Stereo
main debug: looking for audio filter module: 14 candidates
bandlimited_resampler debug: f32l/52800KHz/2->f32l/48000KHz/2
main debug: using audio filter module "bandlimited_resampler"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: found a filter for the whole conversion
main debug: End of audio preroll
main debug: Buffering 26%
main debug: Buffering 29%
main debug: Buffering 32%
main debug: Buffering 35%
main debug: Buffering 37%
main debug: Buffering 40%
main debug: Buffering 43%
main debug: Buffering 46%
main debug: Buffering 49%
main debug: Buffering 52%
main debug: Buffering 55%
main debug: Buffering 58%
main debug: Buffering 61%
main debug: Buffering 64%
main debug: Buffering 67%
main debug: Buffering 69%
main debug: Buffering 72%
main debug: Buffering 75%
main debug: Buffering 78%
main debug: Buffering 81%
main debug: Buffering 84%
main debug: Buffering 87%
main debug: Buffering 90%
main debug: Buffering 93%
main debug: Buffering 96%
main debug: Buffering 99%
main debug: Stream buffering done (1224 ms in 1363 ms)
main debug: Decoder buffering done in 0 ms
main error: picture to display 04f9d184 has invalid status 4
main debug: Detected interlaced video
main debug: Detected interlaced video
main error: picture to display 04f9d184 has invalid status 4
main error: picture to display 04f9d184 has invalid status 4
main error: picture to display 04f9d184 has invalid status 4
main error: picture to display 04f9d184 has invalid status 4
main error: picture to display 04f9d184 has invalid status 4
main error: picture to display 04f9d184 has invalid status 4
main error: picture to display 04f9d184 has invalid status 4
main error: picture to display 04f9d184 has invalid status 4
main error: picture to display 04f9d184 has invalid status 4
main debug: auto hidding mouse
main error: picture to display 04f9d184 has invalid status 4
main error: picture to display 04f9d184 has invalid status 4
......<skip some same lines> ....
main error: picture to display 04f9d184 has invalid status 4
main error: picture to display 04f9d184 has invalid status 4
main error: picture to display 04f9d184 has invalid status 4
main error: picture to display 04f9d184 has invalid status 4
main debug: incoming request - stopping current input
main debug: waitpipe: object killed
main debug: dying input
main debug: control type=0
main debug: control: stopping input
main error: picture to display 04f9d184 has invalid status 4
main debug: dying input
main warning: can't get output picture
avcodec warning: disabling direct rendering
avcodec warning: cannot decode one frame (36397 bytes)
main debug: thread times: real 0m5.984375s, kernel 0m0.000000s, user 0m0.343750s
avcodec debug: ffmpeg codec (MPEG-1/2 Video) stopped
main debug: removing module "avcodec"
main debug: killing decoder fourcc `mpgv', 10 PES in FIFO
main debug: [0] 2 0
main debug: [1] 2 0
main debug: [2] 2 0
main debug: [3] 2 0
main debug: [4] 2 0
main debug: [5] 2 0
main debug: [6] 2 0
main debug: [7] 4 0
main debug: [8] 2 0
main debug: [9] 2 0
main debug: [10] 2 0
main debug: [11] 2 0
main debug: [12] 2 0
main debug: [13] 2 0
main debug: [14] 2 0
main debug: [15] 2 0
main debug: [16] 2 0
main debug: [17] 4 0
main debug: [18] 4 0
main debug: [19] 2 0
main debug: [20] 2 0
main debug: [21] 2 0
main debug: [22] 2 0
main debug: [23] 2 0
main debug: saving a free vout
main debug: removing module "packetizer_mpegvideo"
main warning: received buffer in the future
main debug: thread times: real 0m5.984375s, kernel 0m0.031250s, user 0m0.046875s
main debug: removing module "mpeg_audio"
main debug: killing decoder fourcc `mpga', 4 PES in FIFO
main debug: removing module "mpgatofixed32"
main debug: removing module "scaletempo"
main debug: removing module "bandlimited_resampler"
aout_directx debug: closing audio device
main error: picture to display 04f9d184 has invalid status 4
main error: picture to display 04f9d184 has invalid status 4
aout_directx debug: DirectSoundThread exiting
main debug: thread ended
main debug: thread times: real 0m5.625000s, kernel 0m0.000000s, user 0m0.000000s
main debug: removing module "aout_directx"
main debug: removing module "audio_format"
main debug: removing module "float32_mixer"
main debug: releasing aout
ts debug: pid list:
ts debug: - pid[0] seen
ts debug: - pid[51] seen
ts debug: - pid[103] seen
ts debug: - pid[106] seen
ts debug: - pid[259] seen
ts debug: - pid[515] seen
main debug: Program doesn't contain anymore ES
ts debug: - pid[1283] seen
ts debug: - pid[8191] seen
main debug: removing module "ts"
main debug: removing module "stream_filter_record"
main debug: removing module "access_http"
main debug: thread ended
main debug: dead input
main debug: thread times: real 0m6.968750s, kernel 0m0.046875s, user 0m0.078125s
main debug: destroying useless vout
directx debug: DirectXEventThread terminating
directx debug: DirectXCloseWindow
directx debug: WinProc WM_DESTROY
qt4 debug: releasing video...
qt4 debug: IM: Deleting the input
main debug: TIMER input launching for 'http://192.167.1.10:8001/1:0:1:3AFD:323 ... 0000:0:0:0:' : 238.000 ms - Total 238.000 ms / 1 intvls (Avg 238.000 ms)
qt4 debug: Video is not needed anymore
main debug: removing module "qt4"
main debug: removing module "directx"
main debug: removing module "vout_wrapper"
main debug: removing module "freetype"
main debug: removing module "yuvp"
main debug: removing module "swscale"
main debug: removing module "crop"
main debug: removing module "freetype"
main debug: removing module "yuvp"
main debug: removing module "swscale"
main debug: removing module "deinterlace"
main debug: removing module "freetype"
main debug: removing module "yuvp"
main debug: removing module "swscale"


Has anybodyx the same Problems? As mentioned, erlier versions of VLC ( < 1.1.0) work fine, so there is no problem with the source of the stream (Dreambox).

[Rémi Denis-Courmont]

TS program selection is broken in 1.1.0. You will need VLC 1.1.1 or 1.0.6.

[amar]

Thanks for this reply. So, I will wait for 1.1.1.

By the way: You developers do a real real real good job!!! This VLC is an amazing Product!!! Keep on doing stuff like this!

[Jean-Baptiste Kempf]

Thanks for this reply. So, I will wait for 1.1.1.

By the way: You developers do a real real real good job!!! This VLC is an amazing Product!!! Keep on doing stuff like this!

If you are on Windows, please test the Nightly Build of VLC

[amar]

Yes, I am on Windows XP SP3, so I downloaded the Nightly Build of 16th July and did the following test with versions 1.0.5, 1.1.0, 1.1.1 and 1.2 0:

- Switch on the Dreambox, zap to a channel, keep it running and don't touch it
- Determine the URL of the stream, it is http://192.167.1.10:8001/1:0:1:3AFD:323 ... 0000:0:0:0:
- For each VLC version:
- Install the VLC-Player, thereby uninstalling the previous version and delete all preferences.
- Launch VLC
- Open the Message-window and set the log level to 2
- Open the network stream using the given url
- Check the logfile

The Result is the following:

1.0.5 works fine
1.1.0 fails
1.1.1 fails
1.2.0 fails

Here are the logs (i had to replace the 'http://192.167.1.10' by '****://************')

----------- logfile of version 1.0.5 (works fine) --------------

main debug: adding item `****://************:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:' ( ****://************:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0: )
main debug: rebuilding array of current - root Wiedergabeliste
main debug: rebuild done - 3 items, index 1
main debug: processing request item ****://************:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0: node Wiedergabeliste skip 0
main debug: resyncing on ****://************:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:
main debug: ****://************:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0: is at 2
main debug: starting new item
main debug: creating new input thread
main debug: Creating an input for '****://************:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:'
qt4 debug: Adding a new MRL to recent ones: ****://************:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:
main debug: thread (input) created at priority 1 (../.././src/input/input.c:230)
main debug: thread started
main debug: using timeshift granularity of 50 MBytes
main debug: using timeshift path 'C:\WINDOWS\TEMP'
main debug: `****://************:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:' gives access `http' demux `' path `192.167.1.10:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:'
main debug: creating demux: access='http' demux='' path='192.167.1.10:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:'
main debug: looking for access_demux module: 0 candidates
main debug: no access_demux module matched "http"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: creating access 'http' path='192.167.1.10:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:'
main debug: looking for access module: 2 candidates
access_http debug: http: server='192.167.1.10' port=8001 file='/1:0:1:3AFD:323:4:FFFF0000:0:0:0:
main debug: net: connecting to 192.167.1.10 port 8001
main debug: connection: Resource temporarily unavailable
qt4 debug: IM: Setting an input
qt4 debug: Updating the geometry
qt4 debug: Updating the geometry
main debug: connection succeeded (socket = 764)
access_http debug: protocol 'HTTP' answer code 200
access_http debug: Connection: Close
access_http debug: Content-Type: video/mpeg
access_http debug: Server: stream_enigma2
main debug: using access module "access_http"
main debug: TIMER module_need() : 1879.000 ms - Total 1879.000 ms / 1 intvls (Avg 1879.000 ms)
main debug: Using AStream*Stream
main debug: pre buffering
main debug: received first data after 8 ms
main debug: pre-buffering done 1024 bytes in 0s - 124 kbytes/s
main debug: looking for stream_filter module: 2 candidates
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: looking for stream_filter module: 1 candidate
main debug: using stream_filter module "stream_filter_record"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: creating demux: access='http' demux='' path='192.167.1.10:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:'
main debug: looking for demux module: 50 candidates
main debug: using demux module "ts"
main debug: TIMER module_need() : 8.000 ms - Total 8.000 ms / 1 intvls (Avg 8.000 ms)
main debug: looking for a subtitle file in C:\Dokumente und Einstellungen\Default User\Desktop\
ts debug: DEMUX_SET_GROUP 0 00000000
main debug: `****://************:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:' successfully opened
ts debug: pid[1283] unknown
ts debug: pid[259] unknown
ts debug: pid[515] unknown
ts debug: PATCallBack called
ts debug: new PAT ts_id=803 version=9 current_next=1
ts debug: * number=0 pid=16
ts debug: * number=18128 pid=100
ts debug: * number=18122 pid=130
ts debug: * number=18123 pid=140
ts debug: * number=18125 pid=410
ts debug: * number=18126 pid=420
ts debug: * number=18127 pid=450
ts debug: * number=18124 pid=460
ts debug: * number=18135 pid=530
ts debug: * number=18137 pid=540
ts debug: * number=18139 pid=550
ts debug: * number=18138 pid=560
ts debug: * number=18134 pid=610
ts debug: * number=18129 pid=620
ts debug: * number=18140 pid=630
ts debug: * number=18130 pid=710
ts debug: * number=18136 pid=850
ts debug: * number=18131 pid=900
ts debug: * number=18141 pid=1020
ts debug: * number=18147 pid=1030
ts debug: * number=18142 pid=1120
ts debug: * number=18143 pid=1140
ts debug: * number=15177 pid=1400
ts debug: * number=15101 pid=51
ts debug: * number=15104 pid=200
ts debug: * number=15171 pid=300
ts debug: * number=15161 pid=600
ts debug: * number=15103 pid=800
ts debug: * number=15139 pid=400
ts debug: * number=15168 pid=500
ts debug: pid[106] unknown
ts debug: pid[103] unknown
ts debug: PMTCallBack called
ts debug: new PMT program number=15101 version=7 pid_pcr=259
ts debug: * es pid=259 type=2 dr->i_tag=0x11
ts debug: * es pid=259 type=2 dr->i_tag=0x52
ts debug: * es pid=259 type=2 fcc=mpgv
main debug: selecting program id=15101
main debug: looking for decoder module: 35 candidates
main debug: using decoder module "libmpeg2"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: thread (decoder) created at priority 0 (../.././src/input/decoder.c:315)
main debug: thread started
ts debug: * es pid=515 type=3 dr->i_tag=0xa
ts debug: * es pid=515 type=3 dr->i_tag=0x52
ts debug: found language: deu
ts debug: * es pid=515 type=3 fcc=mpga
main debug: looking for decoder module: 35 candidates
main debug: using decoder module "mpeg_audio"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: thread (decoder) created at priority 2 (../.././src/input/decoder.c:315)
main debug: thread started
qt4 debug: Updating the geometry
qt4 debug: Updating the geometry
qt4 debug: Updating the geometry
qt4 debug: Updating the geometry
ts debug: * es pid=1283 type=6 dr->i_tag=0x52
ts debug: * es pid=1283 type=6 dr->i_tag=0x56
ts debug: * ttxt type=Teletext lan=deu page=100
ts debug: * Stream Component Identifier: 3
ts debug: * es pid=1283 type=6 fcc=telx
ts debug: * es pid=106 type=6 dr->i_tag=0xa
ts debug: * es pid=106 type=6 dr->i_tag=0x52
ts debug: * es pid=106 type=6 dr->i_tag=0x6a
ts debug: * Stream Component Identifier: 17
ts debug: found language: deu
ts debug: * es pid=106 type=6 fcc=a52
ts debug: * es pid=2073 type=5 dr->i_tag=0x6f
ts debug: * es pid=2073 type=5 *unknown*
ts debug: * es pid=103 type=3 dr->i_tag=0xa
ts debug: * es pid=103 type=3 dr->i_tag=0x52
ts debug: found language: 2ch
ts debug: * es pid=103 type=3 fcc=mpga
ts debug: * es pid=54 type=11 dr->i_tag=0x13
ts debug: * es pid=54 type=11 dr->i_tag=0x52
ts debug: * es pid=54 type=11 dr->i_tag=0x66
ts debug: * es pid=54 type=11 *unknown*
ts debug: * es pid=84 type=6 dr->i_tag=0x52
ts debug: * Stream Component Identifier: 7
ts debug: * es pid=84 type=6 *unknown*
ts warning: first packet for pid=259 cc=0x1
ts warning: first packet for pid=1283 cc=0x3
ts warning: first packet for pid=106 cc=0xa
ts warning: first packet for pid=103 cc=0xe
ts warning: first packet for pid=515 cc=0x5
main debug: Buffering 0%
qt4 debug: Updating the geometry
main debug: Buffering 2%
qt4 debug: Updating the geometry
qt4 debug: Updating the geometry
qt4 debug: Updating the geometry
qt4 debug: Updating the geometry
qt4 debug: Updating the geometry
qt4 debug: Updating the geometry
qt4 debug: Updating the geometry
qt4 debug: Updating the geometry
qt4 debug: Updating the geometry
main debug: Buffering 5%
main debug: Buffering 8%
main debug: Buffering 11%
main debug: Buffering 14%
mpeg_audio debug: MPGA channels:2 samplerate:48000 bitrate:256
main debug: reusing aout
main debug: looking for audio output module: 3 candidates
aout_directx debug: OpenAudio
aout_directx debug: found device: Prim?rer Soundtreiber
aout_directx debug: found device: Realtek HD Audio output
aout_directx debug: found device: Realtek HDA HDMI Out
main debug: Buffering 17%
aout_directx debug: device supports 2 channels (DEFAULT!)
aout_directx debug: device supports 1 channel
aout_directx debug: Windows says your SpeakerConfig is stereo
aout_directx debug: creating DirectSoundThread
main debug: thread (DirectSound Notification Thread) created at priority 15 (../../.././modules/audio_output/directx.c:427)
main debug: using audio output module "aout_directx"
main debug: TIMER module_need() : 35.000 ms - Total 35.000 ms / 1 intvls (Avg 35.000 ms)
main debug: thread started
aout_directx debug: DirectSoundThread ready
main debug: output 's16l' 48000 Hz Stereo frame=1 samples/4 bytes
main debug: mixer 'fl32' 48000 Hz Stereo frame=1 samples/8 bytes
main debug: filter(s) 'fl32'->'s16l' 48000 Hz->48000 Hz Stereo->Stereo
main debug: looking for audio filter module: 24 candidates
main debug: using audio filter module "converter_float"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: found a filter for the whole conversion
main debug: looking for audio mixer module: 3 candidates
main debug: using audio mixer module "float32_mixer"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: input 'mpga' 48000 Hz Stereo frame=1152 samples/1161 bytes
main debug: looking for audio filter module: 1 candidate
scaletempo warning: bad input or output format
main warning: no audio filter module matching "scaletempo" could be loaded
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: looking for audio filter module: 1 candidate
scaletempo debug: format: 48000 rate, 2 nch, 4 bps, fl32
scaletempo debug: params: 30 stride, 0.200 overlap, 14 search
scaletempo debug: 1.000 scale, 1440.000 stride_in, 1440 stride_out, 1152 standing, 288 overlap, 672 search, 2400 queue, fl32 mode
main debug: using audio filter module "scaletempo"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: filter(s) 'mpga'->'fl32' 48000 Hz->48000 Hz Stereo->Stereo
main debug: looking for audio filter module: 24 candidates
main debug: using audio filter module "mpgatofixed32"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: found a filter for the whole conversion
main debug: filter(s) 'fl32'->'fl32' 52800 Hz->48000 Hz Stereo->Stereo
main debug: looking for audio filter module: 24 candidates
main debug: using audio filter module "bandlimited_resampler"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: found a filter for the whole conversion
main debug: End of audio preroll
main debug: Buffering 20%
main debug: Buffering 23%
main debug: Buffering 26%
main debug: Buffering 29%
main debug: Buffering 32%
main debug: Buffering 34%
main debug: Buffering 37%
main debug: Buffering 40%
libmpeg2 debug: 720x576 (display 720,576), aspect 768000, sar 64:45, 25.000 fps
main debug: no usable vout present, spawning one
main debug: looking for text renderer module: 2 candidates
main debug: thread (fontlist builder) created at priority 0 (../../.././modules/misc/freetype.c:480)
freetype debug: using fontsize: 2
main debug: using text renderer module "freetype"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: thread started
freetype debug: Building font database...
main debug: looking for video filter2 module: 20 candidates
freetype debug: Finished building font database.
freetype debug: Took 0 microseconds
main debug: thread ended
swscale debug: 32x32 chroma: YUVA -> 16x16 chroma: YUVA with scaling using Bicubic (good quality)
main debug: using video filter2 module "swscale"
main debug: TIMER module_need() : 4.000 ms - Total 4.000 ms / 1 intvls (Avg 4.000 ms)
main debug: looking for video filter2 module: 20 candidates
yuvp debug: YUVP to YUVA converter
main debug: using video filter2 module "yuvp"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: Buffering 43%
main debug: window size: 768x432
main debug: looking for video filter module: 1 candidate
deinterlace debug: using blend deinterlace mode
deinterlace debug: using blend deinterlace method
main debug: using video filter module "deinterlace"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: Deinterlacing available
deinterlace debug: spawning the real video output
main debug: looking for text renderer module: 2 candidates
freetype debug: using fontsize: 2
main debug: using text renderer module "freetype"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: looking for video filter2 module: 20 candidates
swscale debug: 32x32 chroma: YUVA -> 16x16 chroma: YUVA with scaling using Bicubic (good quality)
main debug: using video filter2 module "swscale"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: looking for video filter2 module: 20 candidates
yuvp debug: YUVP to YUVA converter
main debug: using video filter2 module "yuvp"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: window size: 768x432
main debug: looking for video filter module: 1 candidate
main debug: using video filter module "crop"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
crop debug: cropping at 720x576+0+0, autocropping
crop info: ratio 1777
main debug: looking for text renderer module: 2 candidates
freetype debug: using fontsize: 2
main debug: using text renderer module "freetype"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: looking for video filter2 module: 20 candidates
swscale debug: 32x32 chroma: YUVA -> 16x16 chroma: YUVA with scaling using Bicubic (good quality)
main debug: using video filter2 module "swscale"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: looking for video filter2 module: 20 candidates
yuvp debug: YUVP to YUVA converter
main debug: using video filter2 module "yuvp"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: window size: 768x432
main debug: looking for video output module: 7 candidates
vout_directx debug: creating DirectXEventThread
main debug: thread (Vout Events Thread) created at priority 0 (../../../.././modules/video_output/msw/directx.c:282)
main debug: thread started
vout_directx debug: DirectXCreateWindow
main debug: looking for hwnd module: 3 candidates
qt4 debug: requesting video...
main debug: control type=18
qt4 debug: Video was requested 0, 0
qt4 debug: Video is resizing to: 768 432
qt4 debug: Updating the geometry
main debug: using hwnd module "qt4"
main debug: TIMER module_need() : 422.000 ms - Total 422.000 ms / 1 intvls (Avg 422.000 ms)
vout_directx debug: created video sub-window
vout_directx debug: Vout EventThread running
vout_directx debug: DirectXInitDDraw
vout_directx debug: directx-device:
vout_directx debug: DirectXEnumCallback: Prim?rer Anzeigetreiber, display
vout_directx debug: DirectXEnumCallback: ATI Radeon X1200 Series, \\.\DISPLAY1
vout_directx debug: selecting ATI Radeon X1200 Series, \\.\DISPLAY1
vout_directx debug: screen dimensions (0x0,1920x1080)
vout_directx debug: DirectDraw Capabilities: overlay=1 yuvoverlay=1 can_deinterlace_overlay=1 colorkey=1 stretch=1 bltfourcc=1
vout_directx debug: End DirectXInitDDraw
vout_directx debug: DirectXCreateDisplay
vout_directx debug: DirectXCreateClipper
vout_directx debug: disabling screen saver
main debug: using video output module "vout_directx"
main debug: TIMER module_need() : 426.000 ms - Total 426.000 ms / 1 intvls (Avg 426.000 ms)
vout_directx debug: NewPictureVec overlay:yes chroma:YV12
vout_directx debug: YUV overlay created successfully
vout_directx debug: End NewPictureVec (succeeded)
main debug: got 1 direct buffer(s)
main debug: pic render sz 720x576, of (0,0), vsz 720x576, 4cc I420, ar 16:9, sar 64:45, msk r0x0 g0x0 b0x0
main debug: pic in sz 720x576, of (0,0), vsz 720x576, 4cc I420, ar 16:9, sar 64:45, msk r0x0 g0x0 b0x0
main debug: pic out sz 720x576, of (0,0), vsz 720x576, 4cc I420, ar 16:9, sar 64:45, msk r0x0 g0x0 b0x0
main debug: direct render, mapping render pictures 0-14 to system pictures 1-15
main debug: got 16 direct buffer(s)
main debug: pic render sz 720x576, of (0,0), vsz 720x576, 4cc I420, ar 16:9, sar 64:45, msk r0x0 g0x0 b0x0
main debug: pic in sz 720x576, of (0,0), vsz 720x576, 4cc I420, ar 16:9, sar 64:45, msk r0x0 g0x0 b0x0
main debug: pic out sz 720x576, of (0,0), vsz 720x576, 4cc I420, ar 16:9, sar 64:45, msk r0x0 g0x0 b0x0
main debug: direct render, mapping render pictures 0-14 to system pictures 1-15
main debug: got 16 direct buffer(s)
main debug: pic render sz 720x576, of (0,0), vsz 720x576, 4cc I420, ar 16:9, sar 64:45, msk r0x0 g0x0 b0x0
main debug: pic in sz 720x576, of (0,0), vsz 720x576, 4cc I420, ar 16:9, sar 64:45, msk r0x0 g0x0 b0x0
main debug: pic out sz 720x576, of (0,0), vsz 720x576, 4cc I420, ar 16:9, sar 64:45, msk r0x0 g0x0 b0x0
main debug: direct render, mapping render pictures 0-14 to system pictures 1-15
main warning: can't get output picture
main debug: thread times: real 0m0.968750s, kernel 0m0.000000s, user 0m0.000000s
main debug: removing module "libmpeg2"
main debug: killing decoder fourcc `mpgv', 2 PES in FIFO
main debug: [0] 4 0
main debug: [1] 4 0
main debug: [2] 4 0
main debug: [3] 4 0
main debug: [4] 4 0
main debug: [5] 4 0
main debug: [6] 4 0
main debug: [7] 4 0
main debug: [8] 4 0
main debug: [9] 4 0
main debug: [10] 4 0
main debug: [11] 4 0
main debug: [12] 4 0
main debug: [13] 4 0
main debug: [14] 4 0
main debug: saving a free vout
main debug: looking for video filter2 module: 1 candidate
deinterlace debug: using blend deinterlace mode
deinterlace debug: using blend deinterlace method
deinterlace debug: deinterlacing
main debug: using video filter2 module "deinterlace"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: Filter 'deinterlace' (044ea294) appended to chain
main debug: looking for decoder module: 35 candidates
main debug: using decoder module "libmpeg2"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: thread (decoder) created at priority 0 (../.././src/input/decoder.c:315)
main debug: thread started
main debug: destroying useless vout
vout_directx debug: DirectXCloseSurface
vout_directx debug: DirectXCloseDisplay
vout_directx debug: DirectXCloseDisplay clipper
vout_directx debug: DirectXCloseDisplay display
vout_directx debug: DirectXCloseDDraw
vout_directx debug: DirectXEventThread terminating
vout_directx debug: DirectXCloseWindow
vout_directx debug: WinProc WM_DESTROY
qt4 debug: releasing video...
qt4 debug: Video is not needed anymore
qt4 debug: Updating the geometry
main debug: removing module "qt4"
main debug: thread ended
main debug: thread times: real 0m0.609375s, kernel 0m0.031250s, user 0m0.000000s
main debug: removing module "vout_directx"
main debug: thread times: real 0m0.000000s, kernel 0m0.000000s, user 0m0.000000s
main debug: removing module "freetype"
main debug: removing module "yuvp"
main debug: removing module "swscale"
main debug: removing module "crop"
main debug: removing module "freetype"
main debug: removing module "yuvp"
main debug: removing module "swscale"
main debug: Filter 'deinterlace' (044ea294) removed from chain
main debug: removing module "deinterlace"
main debug: removing module "deinterlace"
main debug: removing module "freetype"
main debug: removing module "yuvp"
main debug: removing module "swscale"
main debug: Buffering 46%
main debug: Buffering 49%
main debug: Buffering 52%
main debug: Buffering 55%
main debug: Buffering 58%
main debug: Buffering 61%
main debug: Buffering 64%
main debug: Buffering 67%
main debug: Buffering 69%
main debug: Buffering 72%
libmpeg2 debug: 720x576 (display 720,576), aspect 768000, sar 64:45, 25.000 fps
main debug: no usable vout present, spawning one
main debug: looking for text renderer module: 2 candidates
main debug: thread (fontlist builder) created at priority 0 (../../.././modules/misc/freetype.c:480)
freetype debug: using fontsize: 2
main debug: using text renderer module "freetype"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: looking for video filter2 module: 20 candidates
main debug: thread started
freetype debug: Building font database...
freetype debug: Finished building font database.
freetype debug: Took 0 microseconds
main debug: thread ended
swscale debug: 32x32 chroma: YUVA -> 16x16 chroma: YUVA with scaling using Bicubic (good quality)
main debug: using video filter2 module "swscale"
main debug: TIMER module_need() : 4.000 ms - Total 4.000 ms / 1 intvls (Avg 4.000 ms)
main debug: looking for video filter2 module: 20 candidates
yuvp debug: YUVP to YUVA converter
main debug: using video filter2 module "yuvp"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: window size: 768x432
main debug: looking for video filter module: 1 candidate
main debug: using video filter module "crop"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: Deinterlacing available
main debug: Buffering 75%
crop debug: cropping at 720x576+0+0, autocropping
crop info: ratio 1777
main debug: looking for text renderer module: 2 candidates
main debug: Buffering 78%
freetype debug: using fontsize: 2
main debug: using text renderer module "freetype"
main debug: TIMER module_need() : 4.000 ms - Total 4.000 ms / 1 intvls (Avg 4.000 ms)
main debug: looking for video filter2 module: 20 candidates
swscale debug: 32x32 chroma: YUVA -> 16x16 chroma: YUVA with scaling using Bicubic (good quality)
main debug: using video filter2 module "swscale"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: looking for video filter2 module: 20 candidates
yuvp debug: YUVP to YUVA converter
main debug: using video filter2 module "yuvp"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: window size: 768x432
main debug: looking for video output module: 7 candidates
vout_directx debug: creating DirectXEventThread
main debug: thread (Vout Events Thread) created at priority 0 (../../../.././modules/video_output/msw/directx.c:282)
main debug: thread started
vout_directx debug: DirectXCreateWindow
main debug: looking for hwnd module: 3 candidates
qt4 debug: requesting video...
main debug: Buffering 81%
qt4 debug: Video was requested 0, 0
qt4 debug: Video is resizing to: 768 432
qt4 debug: Updating the geometry
main debug: using hwnd module "qt4"
main debug: TIMER module_need() : 117.000 ms - Total 117.000 ms / 1 intvls (Avg 117.000 ms)
vout_directx debug: created video sub-window
vout_directx debug: Vout EventThread running
vout_directx debug: DirectXInitDDraw
vout_directx debug: directx-device:
vout_directx debug: DirectXEnumCallback: Prim?rer Anzeigetreiber, display
vout_directx debug: DirectXEnumCallback: ATI Radeon X1200 Series, \\.\DISPLAY1
vout_directx debug: selecting ATI Radeon X1200 Series, \\.\DISPLAY1
vout_directx debug: screen dimensions (0x0,1920x1080)
vout_directx debug: DirectDraw Capabilities: overlay=1 yuvoverlay=1 can_deinterlace_overlay=1 colorkey=1 stretch=1 bltfourcc=1
vout_directx debug: End DirectXInitDDraw
vout_directx debug: DirectXCreateDisplay
vout_directx debug: DirectXCreateClipper
vout_directx debug: disabling screen saver
main debug: using video output module "vout_directx"
main debug: TIMER module_need() : 129.000 ms - Total 129.000 ms / 1 intvls (Avg 129.000 ms)
vout_directx debug: NewPictureVec overlay:yes chroma:YV12
vout_directx debug: YUV overlay created successfully
vout_directx debug: End NewPictureVec (succeeded)
main debug: got 1 direct buffer(s)
main debug: pic render sz 720x576, of (0,0), vsz 720x576, 4cc I420, ar 16:9, sar 64:45, msk r0x0 g0x0 b0x0
main debug: pic in sz 720x576, of (0,0), vsz 720x576, 4cc I420, ar 16:9, sar 64:45, msk r0x0 g0x0 b0x0
main debug: pic out sz 720x576, of (0,0), vsz 720x576, 4cc I420, ar 16:9, sar 64:45, msk r0x0 g0x0 b0x0
main debug: direct render, mapping render pictures 0-14 to system pictures 1-15
main debug: got 16 direct buffer(s)
main debug: pic render sz 720x576, of (0,0), vsz 720x576, 4cc I420, ar 16:9, sar 64:45, msk r0x0 g0x0 b0x0
main debug: pic in sz 720x576, of (0,0), vsz 720x576, 4cc I420, ar 16:9, sar 64:45, msk r0x0 g0x0 b0x0
main debug: pic out sz 720x576, of (0,0), vsz 720x576, 4cc I420, ar 16:9, sar 64:45, msk r0x0 g0x0 b0x0
main debug: direct render, mapping render pictures 0-14 to system pictures 1-15
main warning: dts != current_pts (-71096169332)
main warning: decoder synchro warning: pts != current_date (-40000)
main debug: End of video preroll
main debug: Received first picture
qt4 debug: Qt: Entering Fullscreen
main debug: Buffering 84%
main debug: Buffering 87%
main debug: Buffering 90%
main debug: Buffering 93%
main debug: Buffering 96%
main debug: Buffering 99%
main debug: Stream buffering done (1224 ms in 1621 ms)
main debug: Decoder buffering done in 0 ms
main debug: decoded 109/111 pictures
main debug: incoming request - stopping current input
main debug: waitpipe: object killed
main debug: dying input
main debug: control type=0
main debug: control: stopping input
main debug: dying input
main warning: can't get output picture
main warning: can't get output picture
main debug: thread times: real 0m7.937500s, kernel 0m0.000000s, user 0m0.265625s
main debug: removing module "libmpeg2"
main debug: killing decoder fourcc `mpgv', 18 PES in FIFO
main debug: [0] 2 0
main debug: [1] 2 0
main debug: [2] 2 0
main debug: [3] 2 0
main debug: [4] 2 0
main debug: [5] 2 0
main debug: [6] 2 0
main debug: [7] 4 0
main debug: [8] 2 0
main debug: [9] 4 0
main debug: [10] 2 0
main debug: [11] 2 0
main debug: [12] 2 0
main debug: [13] 4 0
main debug: [14] 2 0
main debug: saving a free vout
main warning: received buffer in the future
main debug: thread times: real 0m8.906250s, kernel 0m0.015625s, user 0m0.015625s
main debug: removing module "mpeg_audio"
main debug: killing decoder fourcc `mpga', 3 PES in FIFO
main debug: removing module "mpgatofixed32"
main debug: removing module "scaletempo"
main debug: removing module "bandlimited_resampler"
aout_directx debug: closing audio device
aout_directx debug: DirectSoundThread exiting
main debug: thread ended
main debug: thread times: real 0m8.734375s, kernel 0m0.000000s, user 0m0.000000s
main debug: removing module "aout_directx"
main debug: removing module "converter_float"
main debug: removing module "float32_mixer"
main debug: releasing aout
ts debug: pid list:
ts debug: - pid[0] seen
ts debug: - pid[51] seen
ts debug: - pid[103] seen
ts debug: - pid[106] seen
ts debug: - pid[259] seen
ts debug: - pid[515] seen
main debug: Program doesn't contain anymore ES
ts debug: - pid[1283] seen
ts debug: - pid[8191] seen
main debug: removing module "ts"
main debug: removing module "stream_filter_record"
main debug: removing module "access_http"
main debug: thread ended
main debug: dead input
main debug: thread times: real 0m13.781250s, kernel 0m0.046875s, user 0m0.062500s
main debug: destroying useless vout
vout_directx debug: DirectXCloseSurface
vout_directx debug: DirectXCloseDisplay
vout_directx debug: DirectXCloseDisplay clipper
vout_directx debug: DirectXCloseDisplay display
vout_directx debug: DirectXCloseDDraw
vout_directx debug: DirectXEventThread terminating
vout_directx debug: DirectXCloseWindow
vout_directx debug: WinProc WM_DESTROY
qt4 debug: releasing video...
qt4 debug: IM: Deleting the input
qt4 debug: Updating the geometry
qt4 debug: Updating the geometry
qt4 debug: Qt: Entering Fullscreen
main debug: TIMER input launching for '****://************:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:' : 1899.000 ms - Total 1899.000 ms / 1 intvls (Avg 1899.000 ms)
qt4 debug: Video is not needed anymore
qt4 debug: Updating the geometry
main debug: removing module "qt4"
main debug: thread ended
main debug: thread times: real 0m7.859375s, kernel 0m0.031250s, user 0m0.000000s
main debug: removing module "vout_directx"
main debug: thread times: real 0m0.015625s, kernel 0m0.000000s, user 0m0.000000s
main debug: removing module "freetype"
main debug: removing module "yuvp"
main debug: removing module "swscale"
main debug: removing module "crop"
main debug: removing module "freetype"
main debug: removing module "yuvp"
main debug: removing module "swscale"


------------------- logfile of version 1.1.0 (doesn't work) -----------------

main error: option file-caching does not exist
qt4 warning: Input option: http-caching=1200
main debug: adding item `****://************:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:' ( ****://************:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0: )
main debug: rebuilding array of current - root Wiedergabeliste
main debug: rebuild done - 1 items, index -1
main debug: processing request item ****://************:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0: node null skip 0
main debug: resyncing on ****://************:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:
main debug: ****://************:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0: is at 0
main debug: starting new item
main debug: creating new input thread
main debug: Creating an input for '****://************:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:'
main debug: thread (input) created at priority 1 (input/input.c:214)
qt4 debug: Adding a new MRL to recent ones: ****://************:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:
main debug: thread started
main debug: using timeshift granularity of 50 MiB
main debug: using timeshift path 'C:\WINDOWS\TEMP'
main debug: `****://************:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:' gives access `http' demux `' path `192.167.1.10:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:'
main debug: creating demux: access='http' demux='' location='192.167.1.10:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:' file='\\192.167.1.10:8001\1:0:1:3AFD:323:4:FFFF0000:0:0:0:'
main debug: looking for access_demux module: 0 candidates
main debug: no access_demux module matched "http"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: creating access 'http' location='192.167.1.10:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:', path='\\192.167.1.10:8001\1:0:1:3AFD:323:4:FFFF0000:0:0:0:'
main debug: looking for access module: 1 candidate
access_http debug: http: server='192.167.1.10' port=8001 file='/1:0:1:3AFD:323:4:FFFF0000:0:0:0:'
main debug: net: connecting to 192.167.1.10 port 8001
main debug: connection succeeded (socket = 1008)
qt4 debug: IM: Setting an input
access_http debug: protocol 'HTTP' answer code 200
access_http debug: Connection: Close
access_http debug: Content-Type: video/mpeg
access_http debug: Server: stream_enigma2
main debug: using access module "access_http"
main debug: TIMER module_need() : 198.000 ms - Total 198.000 ms / 1 intvls (Avg 198.000 ms)
main debug: Using AStream*Stream
main debug: pre buffering
main debug: received first data after 2 ms
main debug: pre-buffering done 1024 bytes in 0s - 499 KiB/s
main debug: looking for stream_filter module: 2 candidates
main debug: no stream_filter module matching "any" could be loaded
main debug: TIMER module_need() : 1.000 ms - Total 1.000 ms / 1 intvls (Avg 1.000 ms)
main debug: looking for stream_filter module: 1 candidate
main debug: using stream_filter module "stream_filter_record"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: creating demux: access='http' demux='' location='192.167.1.10:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:' file='\\192.167.1.10:8001\1:0:1:3AFD:323:4:FFFF0000:0:0:0:'
main debug: looking for demux module: 35 candidates
ts debug: pid[1283] unknown
ts debug: pid[259] unknown
ts debug: PATCallBack called
ts debug: new PAT ts_id=803 version=9 current_next=1
ts debug: * number=0 pid=16
ts debug: * number=18128 pid=100
ts debug: * number=18122 pid=130
ts debug: * number=18123 pid=140
ts debug: * number=18125 pid=410
ts debug: * number=18126 pid=420
ts debug: * number=18127 pid=450
ts debug: * number=18124 pid=460
ts debug: * number=18135 pid=530
ts debug: * number=18137 pid=540
ts debug: * number=18139 pid=550
ts debug: * number=18138 pid=560
ts debug: * number=18134 pid=610
ts debug: * number=18129 pid=620
ts debug: * number=18140 pid=630
ts debug: * number=18130 pid=710
ts debug: * number=18136 pid=850
ts debug: * number=18131 pid=900
ts debug: * number=18141 pid=1020
ts debug: * number=18147 pid=1030
ts debug: * number=18142 pid=1120
ts debug: * number=18143 pid=1140
ts debug: * number=15177 pid=1400
ts debug: * number=15101 pid=51
ts debug: * number=15104 pid=200
ts debug: * number=15171 pid=300
ts debug: * number=15161 pid=600
ts debug: * number=15103 pid=800
ts debug: * number=15139 pid=400
ts debug: * number=15168 pid=500
ts debug: pid[515] unknown
ts debug: pid[106] unknown
ts debug: pid[103] unknown
ts debug: PMTCallBack called
ts debug: new PMT program number=15101 version=7 pid_pcr=259
ts warning: skipping program (not selected)



------------------- logfile of version 1.1.1 of 16.jul.2010 (doesn't work) -----------------

qt4 warning: Input option: http-caching=1200
main debug: adding item `****://************:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:' ( ****://************:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0: )
main debug: rebuilding array of current - root Wiedergabeliste
main debug: rebuild done - 1 items, index -1
main debug: processing request item ****://************:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0: node null skip 0
main debug: resyncing on ****://************:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:
main debug: ****://************:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0: is at 0
main debug: starting new item
main debug: creating new input thread
qt4 debug: Adding a new MRL to recent ones: ****://************:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:
main debug: Creating an input for '****://************:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:'
main debug: thread (input) created at priority 1 (input/input.c:214)
main debug: thread started
main debug: using timeshift granularity of 50 MiB
main debug: using timeshift path 'C:\WINDOWS\TEMP'
main debug: `****://************:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:' gives access `http' demux `' path `192.167.1.10:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:'
main debug: creating demux: access='http' demux='' path='192.167.1.10:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:'
main debug: looking for access_demux module: 0 candidates
main debug: no access_demux module matched "http"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: creating access 'http' path='192.167.1.10:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:'
main debug: looking for access module: 2 candidates
access_http debug: http: server='192.167.1.10' port=8001 file='/1:0:1:3AFD:323:4:FFFF0000:0:0:0:'
main debug: net: connecting to 192.167.1.10 port 8001
main debug: connection succeeded (socket = 1056)
qt4 debug: IM: Setting an input
access_http debug: protocol 'HTTP' answer code 200
access_http debug: Connection: Close
access_http debug: Content-Type: video/mpeg
access_http debug: Server: stream_enigma2
main debug: using access module "access_http"
main debug: TIMER module_need() : 223.000 ms - Total 223.000 ms / 1 intvls (Avg 223.000 ms)
main debug: Using AStream*Stream
main debug: pre buffering
main debug: received first data after 4 ms
main debug: pre-buffering done 1024 bytes in 0s - 249 KiB/s
main debug: looking for stream_filter module: 2 candidates
main debug: no stream_filter module matching "any" could be loaded
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: looking for stream_filter module: 1 candidate
main debug: using stream_filter module "stream_filter_record"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: creating demux: access='http' demux='' path='192.167.1.10:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:'
main debug: looking for demux module: 51 candidates
ts debug: pid[1283] unknown
ts debug: pid[259] unknown
ts debug: pid[515] unknown
ts debug: PATCallBack called
ts debug: new PAT ts_id=803 version=9 current_next=1
ts debug: * number=0 pid=16
ts debug: * number=18128 pid=100
ts debug: * number=18122 pid=130
ts debug: * number=18123 pid=140
ts debug: * number=18125 pid=410
ts debug: * number=18126 pid=420
ts debug: * number=18127 pid=450
ts debug: * number=18124 pid=460
ts debug: * number=18135 pid=530
ts debug: * number=18137 pid=540
ts debug: * number=18139 pid=550
ts debug: * number=18138 pid=560
ts debug: * number=18134 pid=610
ts debug: * number=18129 pid=620
ts debug: * number=18140 pid=630
ts debug: * number=18130 pid=710
ts debug: * number=18136 pid=850
ts debug: * number=18131 pid=900
ts debug: * number=18141 pid=1020
ts debug: * number=18147 pid=1030
ts debug: * number=18142 pid=1120
ts debug: * number=18143 pid=1140
ts debug: * number=15177 pid=1400
ts debug: * number=15101 pid=51
ts debug: * number=15104 pid=200
ts debug: * number=15171 pid=300
ts debug: * number=15161 pid=600
ts debug: * number=15103 pid=800
ts debug: * number=15139 pid=400
ts debug: * number=15168 pid=500
ts debug: pid[106] unknown
ts debug: pid[103] unknown
ts debug: PMTCallBack called
ts debug: new PMT program number=15101 version=7 pid_pcr=259
ts warning: skipping program (not selected)


------------------- logfile of version vlc-1.2.0-git-20100716-1653 (doesn't work) ---------


qt4 warning: Input option: http-caching=1200
main debug: adding item `****://************:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:' ( ****://************:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0: )
main debug: rebuilding array of current - root Wiedergabeliste
main debug: rebuild done - 1 items, index -1
main debug: processing request item ****://************:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0: node null skip 0
main debug: resyncing on ****://************:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:
main debug: ****://************:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0: is at 0
main debug: starting new item
main debug: creating new input thread
qt4 debug: Adding a new MRL to recent ones: ****://************:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:
main debug: Creating an input for '****://************:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:'
main debug: thread (input) created at priority 1 (input/input.c:214)
main debug: thread started
main debug: using timeshift granularity of 50 MiB
main debug: using timeshift path 'C:\WINDOWS\TEMP'
main debug: `****://************:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:' gives access `http' demux `' path `192.167.1.10:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:'
main debug: creating demux: access='http' demux='' location='192.167.1.10:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:' file='\\192.167.1.10:8001\1:0:1:3AFD:323:4:FFFF0000:0:0:0:'
main debug: looking for access_demux module: 0 candidates
main debug: no access_demux module matched "http"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: creating access 'http' location='192.167.1.10:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:', path='\\192.167.1.10:8001\1:0:1:3AFD:323:4:FFFF0000:0:0:0:'
main debug: looking for access module: 2 candidates
access_http debug: http: server='192.167.1.10' port=8001 file='/1:0:1:3AFD:323:4:FFFF0000:0:0:0:'
main debug: net: connecting to 192.167.1.10 port 8001
main debug: connection succeeded (socket = 1036)
qt4 debug: IM: Setting an input
access_http debug: protocol 'HTTP' answer code 200
access_http debug: Connection: Close
access_http debug: Content-Type: video/mpeg
access_http debug: Server: stream_enigma2
main debug: using access module "access_http"
main debug: TIMER module_need() : 214.000 ms - Total 214.000 ms / 1 intvls (Avg 214.000 ms)
main debug: Using AStream*Stream
main debug: pre buffering
main debug: received first data after 0 ms
main debug: pre-buffering done 1024 bytes in 0s - 1000000 KiB/s
main debug: looking for stream_filter module: 2 candidates
main debug: no stream_filter module matching "any" could be loaded
main debug: TIMER module_need() : 4.000 ms - Total 4.000 ms / 1 intvls (Avg 4.000 ms)
main debug: looking for stream_filter module: 1 candidate
main debug: using stream_filter module "stream_filter_record"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: creating demux: access='http' demux='' location='192.167.1.10:8001/1:0:1:3AFD:323:4:FFFF0000:0:0:0:' file='\\192.167.1.10:8001\1:0:1:3AFD:323:4:FFFF0000:0:0:0:'
main debug: looking for demux module: 52 candidates
ts debug: pid[1283] unknown
ts debug: pid[259] unknown
ts debug: pid[515] unknown
ts debug: PATCallBack called
ts debug: new PAT ts_id=803 version=9 current_next=1
ts debug: * number=0 pid=16
ts debug: * number=18128 pid=100
ts debug: * number=18122 pid=130
ts debug: * number=18123 pid=140
ts debug: * number=18125 pid=410
ts debug: * number=18126 pid=420
ts debug: * number=18127 pid=450
ts debug: * number=18124 pid=460
ts debug: * number=18135 pid=530
ts debug: * number=18137 pid=540
ts debug: * number=18139 pid=550
ts debug: * number=18138 pid=560
ts debug: * number=18134 pid=610
ts debug: * number=18129 pid=620
ts debug: * number=18140 pid=630
ts debug: * number=18130 pid=710
ts debug: * number=18136 pid=850
ts debug: * number=18131 pid=900
ts debug: * number=18141 pid=1020
ts debug: * number=18147 pid=1030
ts debug: * number=18142 pid=1120
ts debug: * number=18143 pid=1140
ts debug: * number=15177 pid=1400
ts debug: * number=15101 pid=51
ts debug: * number=15104 pid=200
ts debug: * number=15171 pid=300
ts debug: * number=15161 pid=600
ts debug: * number=15103 pid=800
ts debug: * number=15139 pid=400
ts debug: * number=15168 pid=500
ts debug: pid[106] unknown
ts debug: pid[103] unknown
ts debug: PMTCallBack called
ts debug: new PMT program number=15101 version=7 pid_pcr=259
ts warning: skipping program (not selected)


-------------------------------------------

I finally tested version 1.0.5 again (to see if the dreambox is still wroking fine), with success!

[Jean-Baptiste Kempf]

Can you create a dump of this stream?

[amar]

Captured streams work fine. I tested the following "Dums":

1) The drembox can record the TS-Stream to disk, and this is the same stream (not converted and not compressed) as it comes from the cable or sattelite (as far as I know). So I mounted the disk of the Dreambox to my PC (using Samba) and opened the TS file with VLC with Success. All Versions of VLC could play the TS file.

2) I used the VLC version 0.9.8a to "Record" the stream that is transferred from the dreambox. I Recorded it to a local file. Then I used VLC to open and play the local stored file. All Versions of VLC could play the TS file.

I don't know, if the Stream (or possibly it's "Header") gets modified somehow when I do one of the mentioned tests. Is there an other ("more secure") possibility to "dump" the stream? Note: I try to stream a live TV broadcast like "Pro 7" or "ZDF", not a file that resists on a streaming server.

[Jean-Baptiste Kempf]

do not record, but dump it

[amar]

I assume that i have to use version 1.0.5 to make the dump, because newer versions have a problem with the stream.
But I can not find the "dump" function in version 1.0.5. Do I neet to install some other software or am I simply too blind?

Please give me some hints how to make a "dump".

[amar]

I finally found out what the problem is. The crop-Filter doesn't work! After I deactivated this option, everyting works fine.
For me, this issue is closed, because streaming works fine.
I will open a new issue concerning the crop-problem:

The command line

vlc.exe --vout-filter=crop --autocrop test.ts

launches the VLC player that shows only a black video panel.

[sebsto]

on Mac OS X 10.6.2 / VLC 1.1.1 64 Bits / Dreambox 800 (Enigma2 )

v1.1.1 Fails
v1.1.0 OK
v1.0.5 OK


Seb

[Jean-Baptiste Kempf]

Should be fixed in 1.1.2

[jeroensky]

Just want to say, on windows version of VLC it works. But....

...Vlc win32 version 1.1.0 does play stream from Dreambox(i use Stream Interface of Openpli at DM8000, stream same as webcontrol/webtv does).
But in vlc win32 version 1.1.1 it (open network stream) doesn't work anymore.
I get black screen with vlc icon and player won't start.

I hope this will be soon solved, because VLC is the only proper player to play stream of Dreambox (Enigma2) tuner.

[Jean-Baptiste Kempf]

Just want to say, on windows version of VLC it works. But....

...Vlc win32 version 1.1.0 does play stream from Dreambox(i use Stream Interface of Openpli at DM8000, stream same as webcontrol/webtv does).
But in vlc win32 version 1.1.1 it (open network stream) doesn't work anymore.
I get black screen with vlc icon and player won't start.

I hope this will be soon solved, because VLC is the only proper player to play stream of Dreambox (Enigma2) tuner.

Did you read my post or?

[jeroensky]

Did you read my post or?

Of course i did, hehehe.
But i just want to post my experience that 1.1.0 did work and 1.1.1 not .
But i guess you already found out what the problem is.

Update: Version 1.1.2 is working correctly. Thanks a lot by all Enigma2 tuner users

[fernandoch]

Can you please give some details about how you made it to work?

I get the image from my dreambox 800 for 10 seconds or so and then it stops... Any clues?

[martin]

I have similar problem. I can streaming from VLC into Dreambox, but without sound. VLC under XP.

1.0.5 - works well
1.1.0 - 1.1.4 - without audio

Where can be problem ?