Hauppauge 1600 ATSC signal viewing

[boota]

Hi,

New to using VLC in this respect...so I suspect there is something simple that I'm doing wrong.

Setup: Win 7. Hauppauge 1600 with digital input hooked up to OTA antenna. VLC 1.03

Problem:
When i try to view the video using open capture device-> DVB directshow->ATSC- Freq 695000Khz, I always get:

Your input can't be opened:
VLC is unable to open the MRL 'atsc://frequency=695000000'. Check the log for details.

I've tried a number of derivatives, run as administrator, etc, but it seems like VLC doesnt see the card. Windows Media Center sees the card fine, displays video, etc, all on the same machine, same setup.

So...whats the stupid thing I'm doing wrong?

thanks!

[VLC_help]

Open Tools -> Messages... (set Verbosity to 2) before using Media -> ...

[boota]

Thanks for the response.

Code: Select all

main debug: processing request item frequency=695000000 node Playlist skip 0 main debug: resyncing on frequency=695000000 main debug: frequency=695000000 is at 0 main debug: starting new item main debug: creating new input thread main debug: Creating an input for 'frequency=695000000' main debug: thread (input) created at priority 1 (../.././src/input/input.c:230) qt4 debug: IM: Setting an input main debug: thread started main debug: using timeshift granularity of 50 MBytes main debug: using timeshift path 'C:\Users\agrieco\AppData\Local\Temp' main debug: `atsc://frequency=695000000' gives access `atsc' demux `' path `frequency=695000000' main debug: creating demux: access='atsc' demux='' path='frequency=695000000' main debug: looking for access_demux module: 0 candidates main debug: no access_demux module matched "atsc" main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms) main debug: creating access 'atsc' path='frequency=695000000' main debug: looking for access module: 1 candidate qt4 debug: Updating the geometry qt4 debug: Updating the geometry bda debug: CreateTuneRequest: Using Tuning Space: ATSC bda debug: Build: Using Tuning Space ID 2 bda warning: FindFilter: No filter connected: hr=0x80004005 bda warning: Build: Cannot load tuner device and connect network provider: hr=0x80004005 bda warning: SubmitATSCTuneRequest: Cannot Build the Graph: hr=0x80004005 bda warning: DVB_Open: Unsupported Network atsc main warning: no access module matching "atsc" could be loaded main debug: TIMER module_need() : 375.000 ms - Total 375.000 ms / 1 intvls (Avg 375.000 ms) main error: open of `atsc://frequency=695000000' failed: (null) main debug: thread ended main debug: dead input main debug: thread times: real 0m0.377021s, kernel 0m0.031200s, user 0m0.000000s main debug: changing item without a request (current 0/1) main debug: nothing to play qt4 debug: IM: Deleting the input qt4 debug: Updating the geometry qt4 debug: Updating the geometry main debug: TIMER input launching for 'frequency=695000000' : 398.000 ms - Total 398.000 ms / 1 intvls (Avg 398.000 ms)

[VLC_help]

I would guess that VLC doesn't find the device.

[boota]

I believe that to be the problem as well. Any idea on how to fix this??

thanks

[VLC_help]

You are sure that your device has BDA drivers installed?

[boota]

The car works just fine on the same machine with Windows Media Center. By inference,the drivers are loaded, correct?

thanks

[VLC_help]

Device works with ProgDVB?

[boota]

Nope. Sure doesn't. ProgDVB seems to know its there and think there are some drivers there, but report it failing to start. I ack the demark...not a VLC issue...but I'm not real sure what else to do...I've installed Haupaugges' latest drivers for the card to no avail.

thanks

[thewade]

I have the exact same issue: same card, same config, same error.

It isn't working in ProgDVB but it works in MediaPortal through BDA just fine. Surely there is a way, but I am not having any luck getting it to work.