From 0.9.9 to 1.0.0 rc4 - sound problem

Microsoft Windows specific usage questions
Forum rules
Please post only Windows specific questions in this forum category. If you don't know where to post, please read the different forums' rules. Thanks.
Worf72
Blank Cone
Blank Cone
Posts: 10
Joined: 23 Jun 2009 17:33

From 0.9.9 to 1.0.0 rc4 - sound problem

Postby Worf72 » 23 Jun 2009 17:55

Hello,

I've been using VLC for the last 4 years or so.
I recently built a new PC (i7 920, 6GB ram, Sound Blaster X-FI, WinXp 32 bit) and I installed vlc 1.0.0 rc1.
When I open a .avi, .mov or .mpeg file, the video plays ok, but I have problems with the audio: every 4-5 seconds, there a small silence of about 0.3 sec.
When I open a.vob file, again the video is ok, the sound is ok unless I turn on deinterlace (any method)! When I turn on deinterlace, I have the same audio problem!
I tried to install vlc 0.9.9 but had the same problem.
I installed GOM player and everything's fine (both video and audio).
I then installed VLC 1.0.0 rc4 and I have the same audio problem, so I have to use GOM.

I don't have audio problems with any of my other programs (foobar, adobe audition, etc), just with vlc.
What can it be?????

Thanks for any suggestion!

Worf

VLC_help
Mega Cone Master
Mega Cone Master
Posts: 25661
Joined: 13 Sep 2006 14:16

Re: From 0.9.9 to 1.0.0 rc4 - sound problem

Postby VLC_help » 24 Jun 2009 19:02

Does it help if you change audio output module to waveout?
http://wiki.videolan.org/WindowsFAQ-0.9 ... _anomalies

If not, does Tools -> Messages... (set Verbosity to 2) complain something when sound problems happen?

Worf72
Blank Cone
Blank Cone
Posts: 10
Joined: 23 Jun 2009 17:33

Re: From 0.9.9 to 1.0.0 rc4 - sound problem

Postby Worf72 » 28 Jun 2009 11:59

I tried what you suggested, changin the audio output module. I tried them all but kept having the problem.
I got something thru the message window:

main warning: computed PTS is out of range (32063), clearing out
main warning: timing screwed, stopping resampling
main warning: PTS is out of range (-37265), dropping buffer
main warning: output PTS is out of range (85334), clearing out
main warning: output date isn't PTS date, requesting resampling (-65265)
main warning: buffer is 65098 in advance, triggering downsampling
main warning: computed PTS is out of range (19917), clearing out
main warning: timing screwed, stopping resampling
main warning: output PTS is out of range (41334), clearing out
main warning: output date isn't PTS date, requesting resampling (-45265)
main warning: buffer is 45098 in advance, triggering downsampling
main warning: computed PTS is out of range (102521), clearing out
main warning: timing screwed, stopping resampling
main warning: PTS is out of range (57735), dropping buffer
main warning: output PTS is out of range (124334), clearing out
main warning: PTS is out of range (25735), dropping buffer
main warning: PTS is out of range (-6265), dropping buffer
main warning: PTS is out of range (-38265), dropping buffer
main warning: output date isn't PTS date, requesting resampling (-66265)
main warning: buffer is 66098 in advance, triggering downsampling
main warning: output PTS is out of range (56667), clearing out
main warning: input PTS is out of range (77958), trashing
main warning: input PTS is out of range (45958), trashing
main warning: input PTS is out of range (13938), trashing
main warning: computed PTS is out of range (26646), clearing out
main warning: timing screwed, stopping resampling
main warning: PTS is out of range (-39265), dropping buffer
main warning: output PTS is out of range (101605), clearing out
main warning: output date isn't PTS date, requesting resampling (-71265)
main warning: buffer is 71098 in advance, triggering downsampling
main warning: computed PTS is out of range (75938), clearing out
main warning: timing screwed, stopping resampling
main warning: PTS is out of range (4735), dropping buffer
main warning: output PTS is out of range (150667), clearing out
main warning: PTS is out of range (-27265), dropping buffer
main warning: output date isn't PTS date, requesting resampling (-55265)
main warning: buffer is 55098 in advance, triggering downsampling
main warning: computed PTS is out of range (75917), clearing out
main warning: timing screwed, stopping resampling
main warning: PTS is out of range (20735), dropping buffer
main warning: output PTS is out of range (97334), clearing out
main warning: PTS is out of range (-11265), dropping buffer
main warning: output date isn't PTS date, requesting resampling (-43265)
main warning: buffer is 43098 in advance, triggering downsampling
main debug: decoded 106/108 pictures
main warning: output PTS is out of range (29667), clearing out
main warning: input PTS is out of range (50958), trashing
main warning: input PTS is out of range (18958), trashing

I hope this can help you in helping me! :)

Thanks,
Worf

VLC_help
Mega Cone Master
Mega Cone Master
Posts: 25661
Joined: 13 Sep 2006 14:16

Re: From 0.9.9 to 1.0.0 rc4 - sound problem

Postby VLC_help » 28 Jun 2009 14:59

Are those messages from DVD or from some other file? Does it help if you change video output module?
http://wiki.videolan.org/WindowsFAQ-0.9 ... _output.3F

Worf72
Blank Cone
Blank Cone
Posts: 10
Joined: 23 Jun 2009 17:33

Re: From 0.9.9 to 1.0.0 rc4 - sound problem

Postby Worf72 » 28 Jun 2009 18:53

Those messages are from a .iso created from a DVD.

VLC_help
Mega Cone Master
Mega Cone Master
Posts: 25661
Joined: 13 Sep 2006 14:16

Re: From 0.9.9 to 1.0.0 rc4 - sound problem

Postby VLC_help » 29 Jun 2009 18:21

Does the audio work any better if you disable video?

Worf72
Blank Cone
Blank Cone
Posts: 10
Joined: 23 Jun 2009 17:33

Re: From 0.9.9 to 1.0.0 rc4 - sound problem

Postby Worf72 » 30 Jun 2009 18:23

I turned off "high quality audio resampling" and it's ok now.
This is strange though, because on my previous machine (Core 2 duo E6400, 2 GB ram but same audio card X-fi) it was turned on and it worked ok.

Thank you anyway for the nice support!

Worf


Return to “VLC media player for Windows Troubleshooting”

Who is online

Users browsing this forum: Google [Bot] and 85 guests