I have FC3 kernel-2.6.10, SkyStar1, work drivers and good test results and NO LOCK SIGNAL when using vlc -vvv dvb:// --dvb-adapter 0 --dvb-frequency 12207000 --dvb-srate 27500000
================================
[00000001] main vlc debug: opening config file /root/.vlc/vlcrc
[00000001] main vlc warning: config file /root/.vlc/vlcrc does not exist yet
[00000001] main vlc debug: checking builtin modules
[00000001] main vlc debug: checking plugin modules
[00000001] main vlc debug: loading plugins cache file /root/.vlc/cache/plugins-04041e.dat
[00000001] main vlc debug: recursively browsing `modules'
[00000001] main vlc debug: recursively browsing `/usr/local/lib/vlc'
[00000001] main vlc debug: recursively browsing `plugins'
[00000001] main vlc debug: module bank initialized, found 308 modules
[00000001] main vlc debug: opening config file /root/.vlc/vlcrc
[00000001] main vlc warning: config file /root/.vlc/vlcrc does not exist yet
[00000000] main root debug: VLC media player - version 0.8.1 Janus - (c) 1996-2004 VideoLAN
[00000000] main root debug: libvlc was configured with ./configure --enable-v4l --enable-dvb --with-ffmpeg-tree=/install/libs/ffmpeg-20041113 --enable-dvb --with-dvb=/install/linux-2.6.10 --disable-familiar --disable-opie --disable-macosx --disable-familiar --disable-opie --disable-macosx --disable-wxwindows --disable-skins2
[00000001] main vlc debug: translation test: code is "C"
[00000001] main vlc debug: opening config file /root/.vlc/vlcrc
[00000001] main vlc warning: config file /root/.vlc/vlcrc does not exist yet
[00000001] main vlc debug: checking builtin modules
[00000001] main vlc debug: checking plugin modules
[00000001] main vlc debug: loading plugins cache file /root/.vlc/cache/plugins-04041e.dat
[00000001] main vlc debug: recursively browsing `modules'
[00000001] main vlc debug: recursively browsing `/usr/local/lib/vlc'
[00000001] main vlc debug: recursively browsing `plugins'
[00000001] main vlc debug: module bank initialized, found 308 modules
[00000001] main vlc debug: opening config file /root/.vlc/vlcrc
[00000001] main vlc warning: config file /root/.vlc/vlcrc does not exist yet
[00000001] main vlc debug: CPU has capabilities 486 586 MMX 3DNow! MMXEXT SSE FPU
[00000001] main vlc debug: looking for memcpy module
[00000001] main vlc debug: probing 5 candidates
[00000010] main module debug: using memcpy module "memcpymmxext"
[00000377] main playlist debug: creating group Normal with id 1 at position 0
[00000377] main playlist debug: waiting for thread completion
[00000377] main playlist debug: thread -1213297744 (playlist) created at priority 0 (src/playlist/playlist.c:107)
[00000378] main interface debug: looking for interface module
[00000378] main interface debug: probing 2 candidates
[00000186] main module debug: using interface module "hotkeys"
[00000378] main interface debug: interface initialized
[00000378] main interface debug: thread -1221710928 (interface) created at priority 0 (src/interface/interface.c:209)
[00000377] main playlist debug: adding playlist item `dvb://' ( dvb:// )
[00000380] main interface debug: looking for interface module
[00000380] main interface debug: probing 2 candidates
Remote control interface initialized, `h' for help
[00000188] main module debug: using interface module "rc"
[00000380] main interface debug: interface initialized
[00000377] main playlist debug: creating new input thread
[00000382] main input debug: waiting for thread completion
[00000382] main input debug: thread -1230136400 (input) created at priority 0 (src/input/input.c:228)
[00000380] main interface debug: thread -1238529104 (manager) created at priority 0 (src/interface/interface.c:194)
[00000382] main input debug: `dvb://' gives access `dvb' demux `' path `'
[00000382] main input debug: demux2_New: access='dvb' demux='' path=''
[00000383] main demuxer debug: looking for access_demux module
[00000383] main demuxer debug: probing 0 candidates
[00000383] main demuxer warning: no access_demux module matched "dvb"
[00000382] main input debug: access2_New: access='dvb' path=''
[00000384] main access debug: looking for access2 module
[00000384] main access debug: probing 10 candidates
[00000384] dvb access debug: Opening device /dev/dvb/adapter0/frontend0
[00000384] dvb access debug: Frontend Info:
[00000384] dvb access debug: name = ST STV0299 DVB-S
[00000384] dvb access debug: type = QPSK (DVB-S)
[00000384] dvb access debug: frequency_min = 950000 (kHz)
[00000384] dvb access debug: frequency_max = 2150000 (kHz)
[00000384] dvb access debug: frequency_stepsize = 125
[00000384] dvb access debug: frequency_tolerance = 0
[00000384] dvb access debug: symbol_rate_min = 1000000 (kHz)
[00000384] dvb access debug: symbol_rate_max = 45000000 (kHz)
[00000384] dvb access debug: symbol_rate_tolerance (ppm) = 500
[00000384] dvb access debug: notifier_delay (ms) = 0
[00000384] dvb access debug: Frontend Info capability list:
[00000384] dvb access debug: inversion auto
[00000384] dvb access debug: forward error correction 1/2
[00000384] dvb access debug: forward error correction 2/3
[00000384] dvb access debug: forward error correction 3/4
[00000384] dvb access debug: forward error correction 5/6
[00000384] dvb access debug: forward error correction 7/8
[00000384] dvb access debug: forward error correction auto
[00000384] dvb access debug: card can do QPSK
[00000384] dvb access debug: End of capability list
[00000384] dvb access debug: trying to tune the frontend...
[00000384] dvb access debug: using inversion=2
[00000384] dvb access debug: using fec=9
[00000384] dvb access debug: using voltage=13
[00000384] dvb access debug: using tone=1
[00000384] dvb access debug: check frontend ... has signal
[00000384] dvb access debug: check frontend ... has carrier
[00000384] dvb access debug: check frontend ... has signal
[00000384] dvb access debug: check frontend ... has carrier
[00000384] dvb access debug: check frontend ... has signal
[00000384] dvb access debug: check frontend ... has carrier
[00000384] dvb access debug: check frontend ... has signal
[00000384] dvb access debug: check frontend ... has carrier
[00000384] dvb access debug: check frontend ... has signal
[00000384] dvb access debug: check frontend ... has carrier
signal 2 received, terminating vlc - do it again in case it gets stuck
[00000384] dvb access debug: check frontend ... has signal
[00000384] dvb access debug: check frontend ... has carrier
[00000001] main vlc debug: removing all interfaces
[00000380] main interface debug: thread -1238529104 joined (src/interface/interface.c:236)
[00000188] main module debug: unlocking module "rc"
[00000378] main interface debug: thread -1221710928 joined (src/interface/interface.c:236)
[00000186] main module debug: unlocking module "hotkeys"
[00000001] main vlc debug: removing all playlists
[00000384] dvb access error: DVB-S: tuning failed
[00000384] dvb access debug: Opening device /dev/dvb/adapter0/frontend0
[00000384] dvb access debug: Frontend Info:
[00000384] dvb access debug: name = ST STV0299 DVB-S
[00000384] dvb access debug: type = QPSK (DVB-S)
[00000384] dvb access debug: frequency_min = 950000 (kHz)
[00000384] dvb access debug: frequency_max = 2150000 (kHz)
[00000384] dvb access debug: frequency_stepsize = 125
[00000384] dvb access debug: frequency_tolerance = 0
[00000384] dvb access debug: symbol_rate_min = 1000000 (kHz)
[00000384] dvb access debug: symbol_rate_max = 45000000 (kHz)
[00000384] dvb access debug: symbol_rate_tolerance (ppm) = 500
[00000384] dvb access debug: notifier_delay (ms) = 0
[00000384] dvb access debug: Frontend Info capability list:
[00000384] dvb access debug: inversion auto
[00000384] dvb access debug: forward error correction 1/2
[00000384] dvb access debug: forward error correction 2/3
[00000384] dvb access debug: forward error correction 3/4
[00000384] dvb access debug: forward error correction 5/6
[00000384] dvb access debug: forward error correction 7/8
[00000384] dvb access debug: forward error correction auto
[00000384] dvb access debug: card can do QPSK
[00000384] dvb access debug: End of capability list
[00000384] dvb access debug: trying to tune the frontend...
[00000384] dvb access debug: using inversion=2
[00000384] dvb access debug: using fec=9
[00000384] dvb access debug: using voltage=13
[00000384] dvb access debug: using tone=1
[00000384] dvb access error: DVB-S: tuning failed
[00000384] access_file access warning: cannot stat() file `' (No such file or directory)
[00000384] access_file access warning: cannot stat() file `' (No such file or directory)
[00000384] main access warning: no access2 module matching "dvb" could be loaded
[00000382] main input error: no suitable access module for `dvb://'
[00000382] main input debug: thread -1230136400 joined (src/input/input.c:290)
[00000377] main playlist debug: thread -1213297744 joined (src/playlist/playlist.c:130)
[00000377] main playlist debug: deleting playlist item `dvb://'
[00000001] main vlc debug: removing all video outputs
[00000001] main vlc debug: removing all audio outputs
[00000001] main vlc debug: removing announce handler
[00000010] main module debug: unlocking module "memcpymmxext"
[00000001] main vlc debug: saving plugins cache file /root/.vlc/cache/plugins-04041e.dat
================================
What I do wrong? How I can solve this problem?
[00000384] dvb access debug: check frontend ... has signal
[00000384] dvb access debug: check frontend ... has carrier
Thanks all who can help me! Pay it forward!
