dvb-t tuner: channels with same frequency, how distinguish?

[grozea]

My hauppauge nova-t usb dvb-t tuner card works when setting these details under Media > Open Capture Device... in VLC 0.94 on Win XP:

DVB DirectShow
DVB-T
522000 KHz

However that only plays one channel. Several other channels share that frequency. How do I set VLC to play them instead?
Below are screencaps of the properties from two such channels from the dvb-t playback application ProgDVB. Can someone please help me with what data from the screencaps should go where in the VLC Capture Device advanced settings?

http://img522.imageshack.us/img522/2333/92440397dg7.png
http://img522.imageshack.us/img522/8071/76574738su0.png

If I just get one such channel explained then the rest will probably be easy to set up.

[Rémi Denis-Courmont]

Normally, VLC will autodetect the situation and provides the different channels from the menus.

[grozea]

Aha! The menus! I looked for some channel selection there earlier but must have missed it somehow.

To change to another channel on the same frequency I just have to go:
Playback > Program > ____

A new problem though. When selecting channel I get this menu:
http://img407.imageshack.us/img407/4751 ... tchxe4.png

There are a lot of items on the menu. Most are just empty (the ones with numbers only). But even among the ones with text only a few are real working channels (the other are channels for other regions not working in my area but for some reason still picked up by the tuner). Then there's a similar menu for another frequency.

Is there some more convenient way to access the channels in VLC than through those menus?
Is it perhaps possible to make a playlist where each entry selects a specific channel?

(Another problem, BTW: swedish characters ÅÄÖ are replaced with squares in the channel names, as shown by the screencap)

edit:
When I click "advanced" during tuner setup I later get a complex settings string in the bottom input box. Example:

dvb-t:// :dvb-frequency=5222000 :dvb-bandwidth=-1 :dvb-caching=300 :dvb-frequency=11954000 :dvb-inversion=2 :dvb-polarisation="H" :dvb-network-id=0 :dvb-azimuth=0 :dvb-elevation=0 :dvb-longitude=0 :dvb-lnb-lof1=0 :dvb-lnb-lof2=0 :dvb-lnb-slof=0 :dvb-fec=9 :dvb-srate=27500000 :dvb-modulation=-1 :dvb-code-rate-hp=-1 :dvb-code-rate-lp=-1 :dvb-bandwidth=-1 :dvb-guard=-1 :dvb-transmission=-1 :dvb-hierarchy=-1

Under Tools > Media Information... > Codec Details > _____
there is a program number listed for each channel. Example: "[Program 5800]". My hunch is that I need to input that "5800" somewhere among the parameters above. But where?

[grozea]

through viewtopic.php?f=14&t=50410&p=162350
I found the needed syntax:
dvb-t:// :dvb-frequency=522000 :dvb-bandwidth=-1 :program=3010
where 3010 is the channel number as described above

Start VLC from the command-line with a TV channel playing like so:
C:\Program Files\VideoLAN\VLC\vlc.exe dvb-t:// :dvb-frequency=522000 :dvb-bandwidth=-1 :program=3010