TV Digital USB Receiver in Brazil

[sfortier]

here, if I set the frequency on 635250 I see on more options:
dvb-t:// :dvb-frequency=635250 :dvb-bandwidth=-1

That works too...
That way you get what messages???

[ops2000]

Hummm....mine shows: dvb-t:// :dvb-frequency=635250 :dvb-bandwidth=6

I will test that way and get back.

Thanks.

[ops2000]

That's it. I guess I'm getting no data from the device.

Thank you.

main info: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
main debug: adding item `dvb-t://' ( dvb-t:// )
main debug: rebuilding array of current - root Playlist
main debug: rebuild done - 1 items, index -1
main debug: starting new item
main debug: processing request item dvb-t:// node null skip 0
main debug: resyncing on dvb-t://
main debug: dvb-t:// is at 0
main debug: creating new input thread
main debug: Creating an input for 'dvb-t://'
main debug: waiting for thread initialization
main debug: thread started
main debug: thread 5592 (input) created at priority 1 (input/input.c:367)
main debug: `dvb-t://' gives access `dvb-t' demux `' path `'
main debug: creating demux: access='dvb-t' demux='' path=''
main debug: looking for access_demux module: 0 candidates
main warning: no access_demux module matched "dvb-t"
main debug: TIMER module_Need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
qt4 debug: Updating the stream status: 3
main debug: creating access 'dvb-t' path=''
main debug: looking for access module: 1 candidate
bda debug: FindFilter: Connected Asicen_DM011 BDA Digital Tuner_0
bda debug: FindFilter: Connected Asicen_DM011 BDA Digital Capture_0
bda debug: FindFilter: Connected BDA MPEG2 Transport Information Filter
bda debug: Register: registered Graph: VLC BDA Graph 02787000 Pid 0000043c
main debug: using access module "bda"
main debug: TIMER module_Need() : 1526.000 ms - Total 1526.000 ms / 1 intvls (Avg 1526.000 ms)
qt4 debug: New Event: type 1103
qt4 debug: Updating the stream status: 2
main debug: Using AStream*Block
main debug: pre buffering
bda warning: BDA ReadBuffer: Sample Discontinuity. 0x 0
main debug: received first data for our buffer
main debug: prebuffering done 0 bytes in 0s - 0 kbytes/s
main error: cannot pre fill buffer
main warning: cannot create a stream_t from access
qt4 debug: New Event: type 1103
qt4 debug: Updating the stream status: 9
main debug: removing module "bda"
qt4 debug: New Event: type 1103
qt4 debug: New Event: type 1103
qt4 debug: Updating the stream status: 3
qt4 debug: New Event: type 1103
qt4 debug: Updating the stream status: 3

[sfortier]

Try the following:
1. open command prompt:
menu iniciar
executar
type: cmd
click ok

2. go to vlc folder
type: cd "\Arquivos de programas\VideoLAN\VLC" ---- Or any folder you installed vlc
enter

3. open vlc
type: vlc --ts-extra-pmt=15=0x0211:27,0x0212:17 dvb-t:// :dvb-frequency=515143 :dvb-bandwidth=-1
enter

What you get?

[ops2000]

OK, let me make sure to you that I was doing exactly as you said, ok ?

Said that, I got the vlc window with title DVB:// and the last line dvb:// with NO video window opened neither black window. It shows the "pau (the "pause" button (as it was running), but soon it changes to "play" button (the arrow thing).

If I add --verbose=2 I got the previous added messages.

Thank you.

[sfortier]

Sorry!
I don´t know what is going...
The first log you have a directshow graph and valid TS. The second log no graph and the third a graph with no TS...
I will try to learn more.
I will tell you anything new I get.

[ops2000]

Well, there are some big differences...

in my first try, I give NO extra parameters. I just configured 515143 as frequency and left bandwidth as "undefined" in the proper VLC's panel.

All the other tries were with extra-parms and stuff.

Regards.

[ops2000]

Hello,

Got some news, now I am in Rio de Janeiro. I´ve installed ffdshow in order to get H.264 codec (since I read that ISDB-TB 1seg is H.264 video instead of MPEG2) and I got the information below when I call VLC using your parameters. Still I get no black screen, but VLC keeps now "playing" (it shows the "pause" button, as if it is really playing something).

main debug: using demux module "playlist"
main debug: TIMER module_Need() : 14.000 ms - Total 14.000 ms / 1 intvls (Avg 14.000 ms)
main debug: `file/xspf-open://C:\Documents and Settings\antoniopina\Application Data\vlc\ml.xspf' successfully opened
main debug: looking for xml module: 2 candidates
main debug: using xml module "xml"
main debug: TIMER module_Need() : 55.000 ms - Total 55.000 ms / 1 intvls (Avg 55.000 ms)
playlist debug: parsed 0 tracks successfully
main debug: removing module "xml"
main debug: EOF reached
main debug: control type=1
main debug: removing module "playlist"
main debug: removing module "access_file"
main debug: TIMER input launching for 'Media Library' : 59.000 ms - Total 59.000 ms / 1 intvls (Avg 59.000 ms)
main debug: waiting for thread initialization
main debug: thread started
main debug: thread 4616 (preparser) created at priority 0 (playlist/thread.c:80)
main debug: waiting for thread initialization
main debug: thread started
main debug: thread 4628 (fetcher) created at priority 0 (playlist/thread.c:110)
main debug: waiting for thread initialization
main debug: thread started
main debug: thread 4624 (playlist) created at priority 0 (playlist/thread.c:119)
main debug: looking for interface module: 1 candidate
main debug: rebuilding array of current - root Playlist
main debug: rebuild done - 0 items, index -1
main debug: using interface module "hotkeys"
main debug: TIMER module_Need() : 47.000 ms - Total 47.000 ms / 1 intvls (Avg 47.000 ms)
main debug: thread 4640 (interface) created at priority 0 (interface/interface.c:168)
main debug: thread started
main debug: adding item `dvb-t://' ( dvb-t:// )
main info: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
main debug: looking for interface module: 3 candidates
main debug: using interface module "qt4"
main debug: TIMER module_Need() : 221.000 ms - Total 221.000 ms / 1 intvls (Avg 221.000 ms)
main debug: thread 4796 (interface) created at priority 0 (interface/interface.c:168)
main debug: thread started
main debug: rebuilding array of current - root Playlist
main debug: rebuild done - 1 items, index -1
main debug: starting new item
main debug: processing request item null node Playlist skip 0
main debug: creating new input thread
main debug: Creating an input for 'dvb-t://'
main debug: waiting for thread initialization
main debug: thread started
main debug: thread 4728 (input) created at priority 1 (input/input.c:367)
main debug: `dvb-t://' gives access `dvb-t' demux `' path `'
main debug: creating demux: access='dvb-t' demux='' path=''
main debug: looking for access_demux module: 0 candidates
main warning: no access_demux module matched "dvb-t"
main debug: TIMER module_Need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: creating access 'dvb-t' path=''
main debug: looking for access module: 1 candidate
bda debug: FindFilter: Connected Asicen_DM011 BDA Digital Tuner_0
bda debug: FindFilter: Connected Asicen_DM011 BDA Digital Capture_0
bda debug: FindFilter: Connected BDA MPEG2 Transport Information Filter
bda debug: Register: registered Graph: VLC BDA Graph 00c7bfb0 Pid 0000161c
qt4 debug: Error while initializing qt-specific localization
qt4 debug: Updating the stream status: 3
main debug: using access module "bda"
main debug: TIMER module_Need() : 1449.000 ms - Total 1449.000 ms / 1 intvls (Avg 1449.000 ms)
qt4 debug: New Event: type 1103
qt4 debug: Updating the stream status: 2
main debug: Using AStream*Block
main debug: pre buffering
bda warning: BDA ReadBuffer: Sample Discontinuity. 0x 0
main debug: received first data for our buffer
main debug: prebuffering done 48128 bytes in 1s - 43 kbytes/s
main debug: creating demux: access='dvb-t' demux='' path=''
main debug: looking for demux module: 51 candidates
ts debug: user pmt specified (pid=15,number=0)
ts debug: * es pid=529 fcc=h264
main debug: selecting program id=0
qt4 debug: New Event: type 1108
ts debug: * es pid=530 fcc=mp4a
main debug: using demux module "ts"
main debug: TIMER module_Need() : 1439.000 ms - Total 1439.000 ms / 1 intvls (Avg 1439.000 ms)
main debug: looking for a subtitle file in C:\Program Files\VideoLAN\VLC\
main debug: looking for decoder module: 34 candidates
avcodec debug: libavcodec initialized (interface 3358464 )
avcodec debug: ffmpeg codec (H264 - MPEG-4 AVC (part 10)) started
main debug: using decoder module "avcodec"
main debug: TIMER module_Need() : 1030.000 ms - Total 1030.000 ms / 1 intvls (Avg 1030.000 ms)
main debug: looking for packetizer module: 18 candidates
main debug: using packetizer module "packetizer_h264"
main debug: TIMER module_Need() : 112.000 ms - Total 112.000 ms / 1 intvls (Avg 112.000 ms)
main debug: thread 5832 (decoder) created at priority 0 (input/decoder.c:217)
main debug: looking for decoder module: 34 candidates
main debug: thread started
main debug: using decoder module "faad"
main debug: TIMER module_Need() : 38.000 ms - Total 38.000 ms / 1 intvls (Avg 38.000 ms)
main debug: looking for packetizer module: 18 candidates
packetizer_mpeg4audio debug: running MPEG4 audio packetizer
packetizer_mpeg4audio debug: no decoder specific info, must be an ADTS or LOAS stream
main debug: using packetizer module "packetizer_mpeg4audio"
main debug: TIMER module_Need() : 44.000 ms - Total 44.000 ms / 1 intvls (Avg 44.000 ms)
main debug: thread 5856 (decoder) created at priority 2 (input/decoder.c:217)
ts debug: DEMUX_SET_GROUP 0 00000000
main debug: `dvb-t://' successfully opened
qt4 debug: New Event: type 1103
qt4 debug: Updating the stream status: 3
ts debug: pid[7697] unknown
ts debug: pid[6973] unknown
main debug: thread started
ts debug: pid[97] unknown
ts debug: pid[416] unknown
ts debug: pid[984] unknown
ts debug: pid[2436] unknown
ts debug: pid[4261] unknown
ts debug: pid[2623] unknown
ts debug: pid[4274] unknown
ts debug: pid[4056] unknown
ts debug: pid[4633] unknown
ts debug: pid[7762] unknown
ts debug: pid[1713] unknown
ts debug: pid[6811] unknown
ts debug: pid[3353] unknown
ts debug: pid[6670] unknown
ts debug: pid[2679] unknown
ts debug: pid[3328] unknown
ts debug: pid[4960] unknown
ts debug: pid[4319] unknown
ts debug: pid[6607] unknown
ts debug: pid[2816] unknown
ts debug: pid[1001] unknown
ts debug: pid[4450] unknown
ts debug: pid[225] unknown
ts debug: pid[4864] unknown
ts debug: pid[1041] unknown
ts debug: pid[4493] unknown
ts debug: pid[2810] unknown
ts debug: pid[2048] unknown
ts debug: pid[734] unknown
ts debug: pid[1352] unknown
ts debug: pid[3085] unknown
ts debug: pid[4659] unknown
ts debug: pid[2390] unknown
ts debug: pid[2076] unknown
ts debug: pid[1015] unknown
ts debug: pid[3840] unknown
ts debug: pid[512] unknown
ts debug: pid[768] unknown
ts debug: pid[934] unknown
ts debug: pid[6752] unknown
ts debug: pid[653] unknown
ts debug: pid[936] unknown
ts debug: pid[1936] unknown
ts debug: pid[1792] unknown
main debug: control type=1
ts debug: pid[945] unknown
ts debug: pid[7725] unknown
ts debug: pid[1024] unknown
ts debug: pid[8136] unknown
ts debug: pid[39] unknown
ts debug: pid[16] unknown
ts debug: pid[36] unknown
ts debug: pid[20] unknown

[ops2000]

Even more news...

I managed to get Presto PVR working without the license key. So after it searched the channels, I got the following values:

(channel´s name | frequency | video id | audio id )

Canal 1 | 515143 | 768 | 512
SBT | 533143 | 257 | 258
Globo | 563143 | 529 | 530
Band | 599143 | 257 | 258

Hope it helps someone to do something

[VLC_help]

I´ve installed ffdshow in order to get H.264 codec (since I read that ISDB-TB 1seg is H.264 video instead of MPEG2)

You can't use ffdshow with VLC, and VLC also has build-in H.264 decoder so in theory the problems shouldn't be related to codecs, but to the getting the proper signal and demuxing it correctly.

[ops2000]

Thank you for clarifying, I will uninstall ffdshow.

[sfortier]

Theoretically with the command:
vlc --ts-extra-pmt=15=0x0211:27,0x0212:17 dvb-t:// :dvb-frequency=563143 :dvb-bandwidth=-1

You will tune globo on freq 563143 with video pid 0x211 (decimal 529) and audio pid 0x0212 (decimal 530).
I see on your log lots of unknow pids. I get this here when I have bad reception (packets with wrong pid).
You can see on your log that the command set correcly the h264 codec for pid=529 and mp4a codec for pid=530, but you get no packet with these pids.
What´s wrong? I don´t know, but you are close to get something.
Regards.

[ops2000]

I will try those, even I have now presto working Ok.

Did you see the new (at least for me ) USB from pinnacle which claims to receive HDTV (ATSC) ?

Thanks.

[sfortier]

Prolink at http://www.prolink.com.tw/ announced a fullseg SBTVD usb receiver!!!

[ops2000]

Do you know anyone that has tried that one ?

Thanks.

[sfortier]

This will arive in Brazil only on october...

[bhushanrpatil]

Hi ,

need some ISDB sample streams to check a stream analyser. If anybody having it please share.

[luiz_ff]

Hi,

I've just bought an AIKO DT-0818 USB DTV receiver with Asicen chipset. I'm trying to use VLC instead of Presto.
I live in Sao Paulo and I'm trying to get Globo channel at frequency 497143 (Video = 529, Audio = 530). This info I got from Presto configuration.

I've run VLC vlc-1.0.0-git-20090117-0005-win32 from the command prompt:
vlc --ts-extra-pmt=15=0x0211:27,0x0212:17 dvb-t:// :dvb-frequency=497143 :dvb-bandwidth=-1 --verbose=2

I can't see anything on VLC, but I know it's doing something as information keeps being inserted in the log. It seems that there is an issue with the audio and video headers:

bda debug: FindFilter: Connected Asicen_DM011 BDA Digital Tuner_0
bda debug: BDAGraph: Using adapter 0
bda debug: FindFilter: Connected Asicen_DM011 BDA Digital Capture_0
bda debug: FindFilter: Connected BDA MPEG2 Transport Information Filter
bda debug: Graph started hr=0x4200000000
main debug: using access module "bda"
main debug: TIMER module_need() : 1388.699 ms - Total 1388.699 ms / 1 intvls (Avg 1388.699 ms)
main debug: Using AStream*Block
main debug: pre buffering
bda warning: BDA ReadBuffer: Sample Discontinuity. 0x 0
main debug: received first data after 559 ms
main debug: prebuffering done 2068 bytes in 0s - 3 kbytes/s
main debug: looking for stream_filter module: 1 candidate
main debug: TIMER module_need() : 0.198 ms - Total 0.198 ms / 1 intvls (Avg 0.198 ms)
main debug: looking for stream_filter module: 1 candidate
main debug: using stream_filter module "stream_filter_record"
main debug: TIMER module_need() : 0.096 ms - Total 0.096 ms / 1 intvls (Avg 0.096 ms)
main debug: creating demux: access='dvb-t' demux='' path=''
main debug: looking for demux module: 47 candidates
ts debug: user pmt specified (pid=15,number=0)
ts debug: * es pid=529 fcc=h264
main debug: selecting program id=0
ts debug: * es pid=530 fcc=mp4a
main debug: using demux module "ts"
main debug: TIMER module_need() : 1.719 ms - Total 1.719 ms / 1 intvls (Avg 1.719 ms)
main debug: looking for a subtitle file in C:\Program Files\VideoLAN\VLC\
main debug: looking for decoder module: 34 candidates
avcodec debug: libavcodec initialized (interface 0x340000)
avcodec debug: ffmpeg codec (H264 - MPEG-4 AVC (part 10)) started
main debug: using decoder module "avcodec"
main debug: TIMER module_need() : 2.282 ms - Total 2.282 ms / 1 intvls (Avg 2.282 ms)
main debug: looking for packetizer module: 20 candidates
main debug: using packetizer module "packetizer_h264"
main debug: TIMER module_need() : 0.230 ms - Total 0.230 ms / 1 intvls (Avg 0.230 ms)
main debug: thread (decoder) created at priority 0 (input/decoder.c:316)
qt4 debug: New Event: type 1107
qt4 debug: New Event: type 1107
qt4 debug: New Event: type 1107
qt4 debug: New Event: type 1112
qt4 debug: New Event: type 1107
qt4 debug: New Event: type 1114
qt4 debug: New Event: type 1114
qt4 debug: New Event: type 1114
qt4 debug: New Event: type 1114
qt4 debug: New Event: type 1107
qt4 debug: New Event: type 1114
qt4 debug: New Event: type 1114
qt4 debug: New Event: type 1114
qt4 debug: New Event: type 1114
main debug: thread started
main debug: looking for decoder module: 34 candidates
main debug: using decoder module "faad"
main debug: TIMER module_need() : 0.585 ms - Total 0.585 ms / 1 intvls (Avg 0.585 ms)
main debug: looking for packetizer module: 20 candidates
packetizer_mpeg4audio debug: running MPEG4 audio packetizer
packetizer_mpeg4audio debug: no decoder specific info, must be an ADTS or LOAS stream
main debug: using packetizer module "packetizer_mpeg4audio"
main debug: TIMER module_need() : 0.234 ms - Total 0.234 ms / 1 intvls (Avg 0.234 ms)
main debug: thread (decoder) created at priority 2 (input/decoder.c:316)
main debug: thread started
ts debug: DEMUX_SET_GROUP 0 0
main debug: `dvb-t://' successfully opened
ts warning: first packet for pid=529 cc=0x1
ts warning: first packet for pid=530 cc=0x1
ts debug: pid[512] unknown
main debug: Buffering 0%
ts debug: pid[8136] unknown
qt4 debug: New Event: type 1107
qt4 debug: New Event: type 1107
qt4 debug: New Event: type 1112
qt4 debug: New Event: type 1103
qt4 debug: New caching: 0
qt4 debug: New caching: 0
ts debug: pid[39] unknown
ts warning: invalid header [0x9b:9b:9a:63] (pid: 530)
ts warning: discontinuity indicator (pid=529)
main debug: Buffering 0%
ts warning: invalid header [0x9b:9b:9a:4] (pid: 529)
ts warning: invalid header [0x9b:9b:9a:d1] (pid: 530)
ts warning: invalid header [0x9b:9b:9a:d6] (pid: 530)
ts warning: discontinuity indicator (pid=529)
main debug: Buffering 0%
ts warning: invalid header [0x9b:9b:9a:27] (pid: 529)
ts warning: invalid header [0x9b:9b:9a:c8] (pid: 530)
ts debug: pid[16] unknown
ts debug: pid[36] unknown
ts warning: discontinuity indicator (pid=529)
main debug: Buffering 0%
ts warning: invalid header [0x9b:9b:9a:6a] (pid: 529)
ts warning: invalid header [0x9b:9b:9a:72] (pid: 530)
ts warning: invalid header [0x9b:9b:9a:33] (pid: 530)
ts warning: discontinuity indicator (pid=529)
main debug: Buffering 0%
ts warning: invalid header [0x9b:9b:9a:1b] (pid: 529)
ts warning: invalid header [0x9b:9b:9a:3] (pid: 530)
ts warning: invalid header [0x9b:9b:9a:12] (pid: 530)
ts warning: discontinuity indicator (pid=529)
main debug: Buffering 0%
ts warning: invalid header [0x9b:9b:9a:10] (pid: 529)
ts warning: invalid header [0x9b:9b:9a:5e] (pid: 530)
ts warning: discontinuity indicator (pid=529)
main debug: Buffering 0%
ts warning: invalid header [0x9b:9b:9a:da] (pid: 529)
ts warning: invalid header [0x9b:9b:9a:d3] (pid: 530)
ts warning: invalid header [0x9b:9b:9a:da] (pid: 530)
ts warning: discontinuity indicator (pid=529)
main debug: Buffering 0%
ts warning: invalid header [0x9b:9b:9a:76] (pid: 529)
ts warning: invalid header [0x9b:9b:9a:9f] (pid: 530)
ts warning: invalid header [0x9b:9b:9a:6d] (pid: 530)
ts warning: discontinuity indicator (pid=529)
main debug: Buffering 0%
ts warning: invalid header [0x9b:9b:9a:49] (pid: 529)
ts warning: invalid header [0x9b:9b:9a:2] (pid: 530)
ts warning: discontinuity indicator (pid=529)
main debug: Buffering 0%
ts warning: invalid header [0x9b:9b:9a:72] (pid: 529)
ts warning: invalid header [0x9b:9b:9a:ff] (pid: 530)
ts warning: invalid header [0x9b:9b:9a:f2] (pid: 530)
ts warning: discontinuity indicator (pid=529)
main debug: Buffering 0%
ts warning: invalid header [0x9b:9b:9a:b4] (pid: 529)
ts warning: invalid header [0x9b:9b:9a:58] (pid: 530)
ts warning: invalid header [0x9b:9b:9a:cd] (pid: 530)
ts warning: discontinuity indicator (pid=529)
ts warning: invalid header [0x9b:9b:9a:bb] (pid: 529)
ts warning: invalid header [0x9b:9b:9a:7c] (pid: 530)
ts warning: invalid header [0x9b:9b:9a:43] (pid: 530)
ts warning: invalid header [0x9b:9b:9a:9e] (pid: 530)
ts warning: discontinuity indicator (pid=529)
main warning: clock gap, unexpected stream discontinuity
main warning: feeding synchro with a new reference point trying to recover from clock gap
main debug: Buffering 0%
ts warning: invalid header [0x9b:9b:9a:5f] (pid: 529)
ts warning: invalid header [0x9b:9b:9a:59] (pid: 530)
ts warning: invalid header [0x9b:9b:9a:72] (pid: 530)
ts warning: discontinuity indicator (pid=529)
main warning: clock gap, unexpected stream discontinuity
main warning: feeding synchro with a new reference point trying to recover from clock gap
main debug: Buffering 0%
ts warning: invalid header [0x9b:9b:9a:26] (pid: 529)
ts warning: invalid header [0x9b:9b:9a:9c] (pid: 530)
ts warning: invalid header [0x9b:9b:9a:93] (pid: 530)
ts warning: discontinuity indicator (pid=529)
main debug: Buffering 0%
ts warning: invalid header [0x9b:9b:9a:f8] (pid: 529)
ts warning: invalid header [0x9b:9b:9a:e8] (pid: 530)
ts warning: discontinuity indicator (pid=529)
main debug: Buffering 0%
ts warning: invalid header [0x9b:9b:9a:d2] (pid: 529)
ts warning: invalid header [0x9b:9b:9a:72] (pid: 530)
ts warning: discontinuity indicator (pid=529)
main debug: Buffering 0%
ts warning: invalid header [0x9b:9b:9a:51] (pid: 529)
ts warning: invalid header [0x9b:9b:9a:61] (pid: 530)
ts warning: invalid header [0x9b:9b:9a:f] (pid: 530)
ts warning: invalid header [0x9b:9b:9a:72] (pid: 530)
ts warning: discontinuity indicator (pid=529)
main debug: Buffering 0%
ts warning: invalid header [0x9b:9b:9a:ad] (pid: 529)
ts warning: invalid header [0x9b:9b:9a:19] (pid: 530)
ts warning: invalid header [0x9b:9b:9a:b1] (pid: 530)
ts warning: discontinuity indicator (pid=529)
main debug: Buffering 0%
ts warning: invalid header [0x9b:9b:9a:85] (pid: 529)
main debug: incoming request - stopping current input
main debug: dying input
ts warning: invalid header [0x9b:9b:9a:6e] (pid: 530)
main debug: control type=0
main debug: control: stopping input
main debug: thread times: real 0m3.046875s, kernel 0m0.000000s, user 0m0.000000s
avcodec debug: ffmpeg codec (H264 - MPEG-4 AVC (part 10)) stopped
main debug: removing module "avcodec"
main debug: killing decoder fourcc `h264', 0 PES in FIFO
main debug: removing module "packetizer_h264"
main debug: thread times: real 0m3.015625s, kernel 0m0.000000s, user 0m0.000000s
main debug: removing module "faad"
main debug: killing decoder fourcc `mp4a', 0 PES in FIFO
main debug: removing module "packetizer_mpeg4audio"
ts debug: pid list:
ts debug: - pid[16] seen
ts debug: - pid[17] seen
ts debug: - pid[36] seen
ts debug: - pid[39] seen
ts debug: - pid[512] seen
ts debug: - pid[529] seen
main debug: Program doesn't contain anymore ES
ts debug: - pid[530] seen
ts debug: - pid[8136] seen
ts debug: - pid[8191] seen
main debug: removing module "ts"
main debug: removing module "stream_filter_record"
main debug: dying input
bda debug: Queue sample size = 0
bda debug: Queue buffer size = 0