As I finally got this working I thought I could share it with you. This has worked for me several times, and has to be done each time I reboot.
As there are some problems with the VLC software I would only consider this as a workaround until they can figure out what's wrong. There is probably other ways around this, but this is how I have done it.
I have used Windows Media Encoder 9 for this workaround. If you don't have it you can download it from Microsoft.
- Start WM Encoder and choose "BroadCast a Live Event" from the "New Session" screen. And click Next
- In the what devices section check the Video button and choose your Hauppauge Card.
- Choose "Configure" on the Video Card
- Click on "Video Properties"
- Click "Ok"
- Click "Ok" again
- That's it.
- Now Close the Wizzard and the WM Encoder
- Setup your VLC for streaming live TV with the Direct Show option. You don't need to choose any audio device, just let it stand at "default".
- You should now be streaming Live TV with audio.
The VLC will get it's audio from the TV Tuner on the Hauppauge card.
Hope this help some of you.
Regards,
Finn
Note: If just have rebooted you probably also need to start WinTV2000 and select the channel you want to see, before starting VLC.