Postby TomazO » 02 Feb 2004 12:49
here is mine if it helps (it is edited attached cfg file):
[bbuser@jalovec VOD]$ more vls.cfg
# vls configuration file (Example)
# Application wide settings
BEGIN "Vls"
LogFile = "vls.log" # log file
ScreenLog = "enable" # log to the console
SystemLog = "disable" # log to the systemlog
END
# Security informations :
#
# The section "Groups" describes which group is allowed to use which command.
# Each user who belongs to the 'master" group has all the power on the server.
# Each one who belongs to the "monitor" group is a "read-only" user.
BEGIN "Groups"
# --- Format:
# groupname = "cmd1|cmd2|..."
# --- Example:
monitor = "help|browse|logout"
master = "help|browse|start|resume|suspend|stop|shutdown|logout|config|program|input|channe
l|show"
END
# The section "Users" describes each user
# Use "mkpasswd" to generate the encrypted password.
BEGIN "Users"
# --- Format:
# username = "encryptedpassword:group"
# --- Example:
monitor = "3BcKWoiQn0vi6:monitor" # password is 'monitor'
bozo = "JKg2TpPerilnw:master" # password is 'bozo'
END
# Telnet Administration
BEGIN "Telnet"
Domain = "Inet4" # Inet4 or Inet6
LocalPort = "9999" # Port to use for that purpose
Use = "true"
END
# Streams sources declaration
BEGIN "Inputs"
# --- Format:
# InputName = "Type"
# --- Example:
local1 = "local" # Local input example
# kfir = "video" # Video input example (mpeg encoder)
# dvb = "dvb" # Video input example (DVB card)
END
# --- Format:
# BEGIN "program_number"
# Name = "program_name"
# Type = "type" # can be Mpeg1-PS, Mpeg2-PS, Mpeg2-TS, or Dvd
# FileName = "path" # use this variable if Type is not "Dvd"
# Device = "device" # use this variable with type "Dvd"
# END
# --- Example:
BEGIN "1" # MPEG2 stream stored in /home/videolan/streams/Dolby.vob
Name = "bardot"
FileName = "/home/bbuser/VOD/bardot.m2v"
Type = "Mpeg2-PS"
END
BEGIN "2"
Name = "celine"
FileName = "/home/bbuser/VOD/celine_dion.m2v"
Type = "Mpeg2-PS"
END
#BEGIN "3"
# Name = "spider"
# Filename = "/home/bbuser/VOD/spiderbig.mpg"
# Type = "Mpeg2-PS"
#END
#BEGIN "2" # another file
# Name = "canyon"
# FileName = "Dolby_Canyon.vob"
# Type = "Mpeg2-PS"
#END
#
#BEGIN "3" # DVD
# Name = "film"
# Device = "/dev/cdrom"
# Type = "dvd"
# DvdTitle = "1" # Start title
# DvdChapter = "1" # Start chapter
#END
#
#BEGIN "4" # DVD stored on a hard disk
# Name = "matrix"
# Device = "/media/matrix/VIDEO_TS"
# Type = "dvd"
# DvdTitle = "1" # Start title
# DvdChapter = "1" # Start chapter
#END
# Video input configuration
#BEGIN "kfir"
# --- Example:
# Device = "/dev/video" # Video4linux device (default is /dev/video)
# Type = "Mpeg2-PS" # Stream type (default is "Mpeg2-PS")
#END
# Video input (DVB) configuration
BEGIN "dvb"
# --- Example:
# DeviceNumber = "0" # /dev/dvb/adapter<i>
# SendMethod = "0" # 0 - Send All Pids
# 1 - Send only MPEG2 datas
END
# Channel (outputs) declaration
BEGIN "Channels"
# --- Format:
# ChannelName = "Type"
# --- Example:
localhost = "network"
client1 = "network"
# client2 = "network"
# multicast = "network"
# localfile = "file"
END
# Channels configuration
BEGIN "localhost" # The client is on the same host as the server
DstHost = "127.0.0.1"
DstPort = "1242"
END
BEGIN "client1" # unicast example
DstHost = "10.1.3.62" # destination host
DstPort = "1234" # destination port
TTL = "128"
END
#BEGIN "client2" # unicast with IPv6 example
# Domain = "inet6"
# DstHost = "3ffe:ffff::2:12:42" # destination host
# DstPort = "1234" # destination port
#END
#BEGIN "multicast" # multicast example
# Type = "multicast"
# TTL = "1" # Time To Live
# DstHost = "239.2.12.42" # multicast address
# DstPort = "1234" # destination port
#END
#BEGIN "localfile" # file output example
# FileName = "stream.ts"
# Append = "no" # rewrite the file if it exists
#END
# Commands automatically lanched on Startup
# Commands shall be like they would be typed in a telnet console.
BEGIN "LaunchOnStartUp"
command2 = "start bardot client1 local1 --loop --rtp --end"
command1 = "stop client1"
# command2 = "start celine client1 local1 --loop"
# command3 = "start spider client1 local1 --rtp"
# command1 = "start dolby localhost local1 --loop"
# command2 = "start 28009 client1 dvb"
END
[bbuser@jalovec VOD]$
Regards, Tomazo