Console for aminet110
Posted: 18 Feb 2010 12:22
Hi all,
I have connected my aminet110 to my pc using a custom made rs232 to ttl cable and hyperterminal. I read normally the console but hitting enter does not let me login to linux. Here is what I get on my console:
Has anybody found a solution, please. Your feedback is greatly appreciated
Regards,
I have connected my aminet110 to my pc using a custom made rs232 to ttl cable and hyperterminal. I read normally the console but hitting enter does not let me login to linux. Here is what I get on my console:
Code: Select all
Initialising NOR Flash.
Amino Communications IntActOS-32 v1.44 on AMINET11x with 32Mb RAM
Processor: 51510950 running at 252.000 MHz
00140000 ASB v1.22
00148000 FIL v1.36
00150000 VUL v1.14
00158000 ETH v1.26
00168000 CPT v1.00
AMINET11x BOOT ROM VERSION 1.32.18
TV system = PAL-I Output format = CVBS-RGBON
Setting DENC0_CR1 to 91000040
Setting DENC1_CR1 to 91001F40
Setting DENCMUX to 3E000000
iic write status: 00000000
multicast booting
PHY=LAN83C183 (LAN91C111 Internal)
SMC91C11xFD(rev:2) at 70100300 IRQ:25 MEMSIZE:8192 ADDR: 00:02:02:10:50:AC
PHY auto-negotiate timed out
flashled: major=00000001 , minor=00000001
bootos AMINET.img
AMINET.imgRegards,