I have a Core2Quad with 4 gig's of RAM running Windows7 64-bit.
I have a Logitech QuickCam Communicate Deluxe
I am running VLC version 1.0.3
Yesterday I set up a HTTP stream of my webcam. I wanted to see what the kids were doing when I wasn't around.
1. I clicked Media --> Streaming. Clicked the "Capture Device" tab and told it to use my webcam.
2. I clicked the "Network" tab and chose HTTP for my Protocol, entered my PC's IP address, and clicked on "Stream."
3. On the next window under "Source" is: http://192.168.1.5 and clicked "Next."
4. Added a new HTTP destination
5. Entered my IP address again and put it on port 80.
6. Clicked Stream.
On the other computer I want to see the stream I opened VLC and:
1. Clicked Media --> Open Network Stream
2. Changed Protocol to HTTP and entered the streaming PC's IP address (192.168.1.5)
3. Clicked Play
Well, after about an hour of live streaming my computer locked up and I had to press the "Reset" button. Everything seemed to come back up successfully, but now when I try to stream the same video, it won't work. The first couple lines in the log read this:
main error: cannot pre fill buffer
main warning: cannot create a stream_t from access
Code: Select all
main error: cannot pre fill buffer
main warning: cannot create a stream_t from access
main debug: removing module "access_http"
main debug: waitpipe: object killed
main debug: finished input
main debug: dead input
main debug: thread ended
main debug: destroying useless sout
main debug: destroying chain... (name=transcode)
main debug: destroying chain... (name=std)
main debug: removing module "mux_ts"
main debug: waitpipe: object killed
main debug: HTTP host removed
main debug: no hosts left, stopping httpd
access_output_http debug: Close
main debug: removing module "access_output_http"
main debug: removing module "stream_out_standard"
main debug: destroying chain done
main debug: removing module "stream_out_transcode"
main debug: destroying chain done
main debug: thread times: real 0m10.065014s, kernel 0m0.031200s, user 0m0.000000s
main debug: changing item without a request (current 4/5)
main debug: nothing to play
qt4 debug: IM: Deleting the input
qt4 debug: Updating the geometry
qt4 debug: Updating the geometry
main debug: TIMER input launching for 'Streaming' : 10090.000 ms - Total 10090.000 ms / 1 intvls (Avg 10090.000 ms)
qt4 debug: MRL passed to the Sout: http://192.168.1.5
main debug: adding item `http://192.168.1.5' ( http://192.168.1.5 )
qt4 debug: Adding a new MRL to recent ones: http://192.168.1.5
main debug: rebuilding array of current - root Playlist
main debug: rebuild done - 6 items, index 4
main debug: processing request item http://192.168.1.5 node null skip 0
main debug: resyncing on http://192.168.1.5
main debug: http://192.168.1.5 is at 5
main debug: starting new item
main debug: creating new input thread
main debug: Creating an input for 'http://192.168.1.5'
main debug: thread (input) created at priority 1 (../.././src/input/input.c:230)
main debug: thread started
main debug: using timeshift granularity of 50 MBytes
main debug: using timeshift path 'C:\Users\Dan\AppData\Local\Temp'
main debug: `http://192.168.1.5' gives access `http' demux `' path `192.168.1.5'
main debug: creating demux: access='http' demux='' path='192.168.1.5'
main debug: looking for access_demux module: 0 candidates
main debug: no access_demux module matched "http"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: creating access 'http' path='192.168.1.5'
main debug: looking for access module: 2 candidates
access_http debug: http: server='192.168.1.5' port=80 file='(null)
I have un-installed & re-installed VLC and my webcam software & drivers. I can't figure out what's going on. Any help would be great!
Thanks in advance!
