marq does not display vlc 2.2.0
Posted: 04 Oct 2013 15:06
by BloodZeed
can anyone help me getting this to display when transcoding already have the text listed under the gui
:sout=#transcode{vcodec=h264,vb=1600,soverlay,subfilter=marq,width=1280,height=720,acodec=mp3,ab=80,channels=2,samplerate=44100}:http{mux=ts,dst=:1234/} :sout-keep
soverlay,subsource=marq
is the one i did use
also this one worked fine in 2.0.8
soverlay,sfilter=marq
also
main debug: Streaming is at 0
main debug: creating new input thread
main debug: Creating an input for 'Streaming'
main debug: using sout chain=`transcode{vcodec=h264,vb=1600,width=1280,height=720,acodec=mp3,ab=80,channels=2,samplerate=44100}:http{mux=ts,dst=:1234/}'
main debug: stream=`http'
:sout=#transcode{vcodec=h264,vb=1600,soverlay,sub-source=marq,width=1280,height=720,acodec=mp3,ab=80,channels=2,samplerate=44100}:http{mux=ts,dst=:1234/} :sout-keep i put this chan in but when checking the debug long chan is main debug: using sout chain=`transcode{vcodec=h264,vb=1600,width=1280,height=720,acodec=mp3,ab=80,channels=2,samplerate=44100}:http{mux=ts,dst=:1234/}' seems to ignore what i put in manual
Re: marq does not display vlc 2.2.0
Posted: 07 Oct 2013 18:40
by Jean-Baptiste Kempf
Yes, the GUI was broken in 2.1.0. Use 2.1.1 or the very latest nightly build (aka from tomorrow)
Re: marq does not display vlc 2.2.0
Posted: 08 Oct 2013 21:55
by deemytch
Hi, I also found that about marquee:
Some combinations with soverlay and sub-filter in command-line did his job, only if I enable qt interface and then switch that effect by mouse in menu.
But that is not what I want. I tryied a lot of variants like that and so on, I ve placed it before parameters, after, inside, used sub-source, sub-filter etc.
'#transcode{vcodec=x264,vb=800(..skip..)venc=x264{profile=baseline,preset=ultrafast(..skip...)},sub-filter="marq{marquee=Architecture,color=8388608,size=5,x=10,y=10,position=1}":standard{access=http,mux=ts,dst=:5005/link.mp4,http-host=ip.local}'
Jean-Baptiste wrote that GUI is broken. What about command-line, or rc-interface?
Which are right paramethers for rendering some text on top of a recoded video?
Thank anybody in advance.
Re: marq does not display vlc 2.2.0
Posted: 14 Jan 2014 13:51
by rohuezo
Hi,
this command line works for me on my system Windows 7 64-bit VLC Media Player 2.0.5:
Code: Select all
"%VLC%" screen:// -I rc --rc-quiet --rc-host=127.0.0.1:81 -Vdummy --novideo --file-logging --logmode=html --log-verbose=2 --logfile=C:\\Temp\\log.html --logo-file=File:///C:/Temp/logo1.png,5000,128;File:///C:/Temp/logo2.png,5000,128 --logo-position=10 --logo-repeat=-1 --marq-marquee="Copyright (c) 2014 rohuezo" --marq-position=9 --marq-size=32 --marq-timeout=0 --marq-opacity=128 --marq-refresh=1500 :screen-fps=25.000000 :screen-left=0 :screen-top=0 :screen-width=1920 :screen-height=1080 :screen-mouse-image=File:///C:/temp/mouse.png :sout=#transcode{vcodec=h264,vb=800,fps=25,acodec=none,soverlay,sfilter=logo:marq}:file{dst=C:\\Temp\\out.mp4}
Where
%VLC% is the path to the
vlc.exe. To stop this recording you have to telnet to 127.0.0.1:81 and type quit.
If I use the libvlc to do this it does not work...
I will try the same with a newer version of VLC Media Player...
Update (15. January 2014):
Here is the command line that works with VLC version 2.1.2. I had to change the logo file path format and the mouse file path format.
Code: Select all
"%VLC%" screen:// -I rc --rc-quiet --rc-host=127.0.0.1:81 -Vdummy --novideo --file-logging --logmode=text --log-verbose=2 --logfile=C:\\Temp\\log.txt --logo-file=C:\\Temp\\Siemens.png,5000,128;C:\\Temp\\dg.png,5000,128 --logo-position=10 --logo-repeat=-1 --marq-marquee="Copyright (c) 2014 develop group" --marq-position=9 --marq-size=32 --marq-timeout=0 --marq-opacity=128 :screen-fps=25.000000 :screen-left=0 :screen-top=0 :screen-width=1920 :screen-height=1080 :screen-mouse-image=C:\\Temp\\mouse.png :sout=#transcode{vcodec=h264,vb=800,fps=25,acodec=none,soverlay,sfilter=logo:marq}:file{dst=C:\\Temp\\out.mp4}
The Night Build
http://nightlies.videolan.org/build/win64/last/ crashes when I call the command line from above. It also crashes if I try to start screen recording using the GUI. Here is the log file:
Code: Select all
-- logger module started --
core debug: VLC media player - 2.2.0-git-20140115-0402 Weatherwax
core debug: Copyright © 1996-2014 the VideoLAN team
core debug: revision 2.1.0-git-1906-g86cf839
core debug: configured with ../extras/package/win32/../../../configure '--enable-update-check' '--enable-lua' '--enable-faad' '--enable-flac' '--enable-theora' '--enable-twolame' '--enable-quicktime' '--enable-avcodec' '--enable-merge-ffmpeg' '--enable-dca' '--enable-mpc' '--enable-libass' '--enable-x264' '--enable-schroedinger' '--enable-realrtsp' '--enable-live555' '--enable-dvdread' '--enable-shout' '--enable-goom' '--enable-caca' '--disable-sdl' '--enable-qt' '--enable-skins2' '--enable-sse' '--enable-mmx' '--enable-libcddb' '--enable-zvbi' '--disable-telx' '--enable-nls' '--disable-dirac' '--host=x86_64-w64-mingw32' '--enable-debug' '--disable-chromaprint' '--disable-gnutls' 'host_alias=x86_64-w64-mingw32'
core debug: using interface module "logger"
core debug: adding item `screen://' ( screen:// )
core debug: meta ok for (null), need to fetch art
core debug: lookincg for oreinterface mdebugodul:e ma tchinlg o"okhotkeys,noinneg ": fo32r c anmeta fetdidatescher m
odule matching "any": 2 candidates
core debug: using interface module "hotkeys"
lua debug: Trying Lua scripts in C:\Users\uawesw9j\AppData\Roacmorieng\vlc\lua \meta\fetcdherebug
: looking for luainterface module mdaebugtc:h ing "Trglobalhotkyeys,nonein":g L32ua candi scripts idn atL:\Office\eSoftware\VsLC\vlc-2.2
.0-git-20140115-0402\lua\meta\fetcher
lua debug: Trying Lua playlist script L:\Office\Software\VLC\vlc-2.2.0-git-20140115-0402\lua\meta\fetcher\tvrage.luac
core debug: using meta fetcher module "lua"
core debug: removing module "lua"
core debug: searching art for screen://
core debug: looking for art finder module matching "any": 4 candidates
core debug: using interface module "win32"
core debug: lluooking for interface am odudele bumatchigng :" rc": T32 caryndiing Lua scriptsd aitesn
C:\Users\uawesw9j\AppData\Roaming\vlc\lua\meta\art
luoal debugdrc: debug : Tryibaseng Lua scr:ipts in L:\Office\1Software\V2LC\vlc-2.27.0-git-201.40115-04020\lua\meta\.art0.1
, port: 81
core debug: net: listening to 127l.ua0.0.1 port debug81:
Trying Lua playlist script L:\Office\Software\VLC\vlc-2.2.0-git-20140115-0402\lua\meta\art\00_musicbrainz.luac
lua debug: Trying Lua playlist script L:\Office\Software\VLC\vlc-2.2.0-git-20140115-0402\lua\meta\art\01_googleimage.luac
lua debug: Trying Lua playlist script L:\Office\Software\VLC\vlc-2.2.0-git-20140115-0402\lua\meta\art\02_frenchtv.luac
core debug: using interface module "oldrc"
core debug: processing request item: null, node: Playlist, skip: 0
core debug: rebuilding array of current - root Playlist
core debug: luarebu debugil:d don e -T rying Lua1 playlisit script L:\tOeffice\Softmware\VLC\vslc-2.2.0-g,it-20140115-0402\lua\meta\art\03_lastfm.luac
index -1
core debug: starting playback of the new playlist item
core debug: resyncing on screen://
core debug: screen:// is at 0
core debug: creating new input thread
core debug: Creating an input for 'screen://'
lua debug: Trying Lua scripcotres in debugC:\Users\u:a wesw9j\AppDatau\sRoaming\vlic\lua\metan\artg sout cha
in=`transcode{vcodec=h264l,vb=800,fpus=25,acaodec=no debugne,soverla:y,sfilter= logo:marq}:fTile{dst=C:r\\Tying Lua scermp\\out.mpi4}pts' in
L:\Office\Software\VLC\vlcc-or2e. d2e.0-gitbu-20140115-04g0:2\l ua\mseta\arttr
eam=`file'
core debug: lualo debug:o kingTr ying Lua plafyolist script L:\Office\Software\VLC\vlc-2.2.0-git-20140115-0402\lua\meta\art\00_musicbrainz.luac
r sout stream module matching "file": 40 candidates
core debug: set config option: sout-standard-dst to C:\Temp\out.mp4
core debug: looking for sout access modulel mautchain gdebug ": fileTry":ing Lua playlist script L1:6\ Ocffice\Software\VLC\vlc-2.2.0-git-20140115-0402\lua\meta\art\01_googleimage.luaca
ndidates
access_output_file debug: file access output opened l(uaC: debug\Temp\out.:m p4)Tryin
g Lua cpolaylreist debug: script usL:\Officei\ng Software\VsLC\vlc-2.2o.0-git-201u4t 0115-0402\alua\meta\acrt\02_frencchtvess.luac mo
dule "access_output_file"
core debug: looking for sout mux module matching "mp4": 20 candidates
mux_mp4 debug: Mp4 muxer opened
core debug: using sout mux module "mux_mp4"
stream_out_standard debug: usinlg `uafile debug/: mp4://TC:\Temp\ourtying.mp4' Lu
a plcoreay debug: listus scripting L:\Office\sSout streaomftware\VLC \module "vstream_outl_standard"c
-2.2.0-git-201c40115-0402o\lua\mereta\art debug: \03_lastfm.lsuactrea
m=`transcode'
core debug: looking for sout stream module matching "transcode": 40 candidates
core debug: set config option: sout-transcode-vcodec tcoore debugh264:
no art finder cmoreo duleds matchede
bug: coreset confi g odebugp: tion: artsout-trans code-vb ton ot 800fo
und for coscreen://
re debug: set config option: sout-transcode-fps to 25
core debug: set config option: sout-transcode-acodec to none
core debug: set config option: sout-transcode-soverlay to (null)
core debug: set config option: sout-transcode-sfilter to logo:marq
stream_out_transcode debug: Checking codec mapping for none got none
stream_out_transcode debug: codec audio=none 0Hz 0 channels 96Kb/s
stream_out_transcode debug: codec video=h264 0x0 scaling: 0.000000 800kb/s
core debug: looking for text renderer module matching "any": 4 candidates
freetype debug: Using Arial as font from file C:\WINDOWS\Fonts\arial.ttf
freetype debug: Using Courier New as mono-font from file C:\WINDOWS\Fonts\cour.ttf
freetype debug: using fontsize: 2
core debug: using text renderer module "freetype"
core debug: looking for video filter2 module matching "any": 116 candidates
swscale debug: 32x32 (32x32) chroma: YUVA -> 16x16 (16x16) chroma: RGBA with scaling using Bicubic (good quality)
core debug: using video filter2 module "swscale"
core debug: looking for video filter2 module matching "any": 116 candidates
yuvp debug: YUVP to YUVA converter
core debug: using video filter2 module "yuvp"
core debug: using sout stream module "stream_out_transcode"
core debug: using timeshift granularity of 50 MiB, in path 'C:\Users\uawesw9j\AppData\Local\Temp'
core debug: `screen://' gives access `screen' demux `' path `'
core debug: creating demux: access='screen' demux='' location='' file='(null)'
core debug: looking for access_demux module matching "screen": 24 candidates
screen debug: capturing subscreen top: 0, left: 0, width: 1920, height: 1080
screen debug: screen width: 1920, height: 1080, depth: 32
screen debug: Using file:///C://Temp//mouse.png for the mouse pointer image
core debug: creating access 'file' location='/C://Temp//mouse.png', path='C:\\Temp\\mouse.png'
core debug: looking for access module matching "file": 38 candidates
filesystem debug: opening file `C:\\Temp\\mouse.png'
core debug: using access module "filesystem"
core debug: Using stream method for AStream*
core debug: starting pre-buffering
core debug: received first data after 0 ms
core debug: pre-buffering done 951 bytes in 0s - 928710 KiB/s
core debug: removing module "filesystem"
core debug: looking for decoder module matching "any": 82 candidates
core debug: using decoder module "png"
core debug: removing module "png"
core debug: selecting program id=0
core debug: using access_demux module "screen"
core debug: looking for packetizer module matching "any": 42 candidates
rawvideo warning: invalid frame rate 0/0, using 25 fps instead
core debug: using packetizer module "rawvideo"
core debug: starting in sync mode
core debug: looking for meta reader module matching "any": 4 candidates
lua debug: Trying Lua scripts in C:\Users\uawesw9j\AppData\Roaming\vlc\lua\meta\reader
lua debug: Trying Lua scripts in L:\Office\Software\VLC\vlc-2.2.0-git-20140115-0402\lua\meta\reader
lua debug: Trying Lua playlist script L:\Office\Software\VLC\vlc-2.2.0-git-20140115-0402\lua\meta\reader\filename.luac
lua debug: Trying Lua scripts in C:\Users\uawesw9j\AppData\Roaming\vlc\lua\meta\reader
lua debug: Trying Lua scripts in L:\Office\Software\VLC\vlc-2.2.0-git-20140115-0402\lua\meta\reader
lua debug: Trying Lua playlist script L:\Office\Software\VLC\vlc-2.2.0-git-20140115-0402\lua\meta\reader\filename.luac
core debug: no meta reader modules matched
core debug: `screen://' successfully opened
core debug: looking for video blending module matching "any": 2 candidates
core debug: using video blending module "blend"
core debug: Buffering 0%
core debug: switching to async mode
core debug: adding a new sout input (sout_input:0000000002280560)
stream_out_transcode debug: creating video transcoding from fcc=`RV32' to fcc=`h264'
core debug: looking for decoder module matching "any": 82 candidates
rawvideo warning: invalid frame rate 0/0, using 25 fps instead
core debug: using decoder module "rawvideo"
core debug: looking for encoder module matching "any": 36 candidates
x264 debug: version x264 0.140.X
x264: using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX
x264: profile High, level 4.0
core debug: using encoder module "x264"
core debug: removing module "x264"
x264 debug: framecount still in libx264 buffer: 0
x264: final ratefactor: 33.83
core debug: Buffering 13%
core debug: Buffering 26%
core debug: Buffering 40%
core debug: Buffering 53%
core debug: Buffering 66%
core debug: Buffering 80%
core debug: Buffering 93%
core debug: Stream buffering done (320 ms in 323 ms)
core debug: Decoder wait done in 0 ms
stream_out_transcode debug: decoder aspect is 1.777778:1
stream_out_transcode debug: source pixel aspect is 1.000000:1
stream_out_transcode debug: scaled pixel aspect is 1.000000:1
stream_out_transcode debug: source 1920x1080, destination 1920x1080
stream_out_transcode debug: source fps 0/0, destination 25/1