Should we add all type of devices? DVB-S, DVB-C, DVB-T, ASI, etc?
Linux or Windows?I also require VLC to work with Blackmagic Intensity Pro. Any progress?
I would like to use the HDMI input.SDI or normal input?
ok, then someone needs to fix the code.Unfortunately no... Thanks for all your trouble.
Indeed, In fact the card lists these modes with -vvv which is quite helpful:Blackmagic Intensity Pro works for me with decklink input module - same as in previous post.
One note- you should know exact inputsignal parameters(i.e. resolution and frame rate) and start vlc with proper settings.
Module can not detect sygnal parameters automatically - i.e. if you start with 720p 60Hz but sygnal is actually 720p 59Hz - it will show "no sygnal" error and will not capture.
Code: Select all
Found mode 'ntsc': NTSC (720x486, 29.970 fps, interlaced [BFF])
Found mode 'nt23': NTSC 23.98 (720x486, 23.976 fps)
Found mode 'pal ': PAL (720x576, 25.000 fps, interlaced [TFF])
Found mode '23ps': HD 1080p 23.98 (1920x1080, 23.976 fps)
Found mode '24ps': HD 1080p 24 (1920x1080, 24.000 fps)
Found mode 'Hp25': HD 1080p 25 (1920x1080, 25.000 fps)
Found mode 'Hp29': HD 1080p 29.97 (1920x1080, 29.970 fps)
Found mode 'Hp30': HD 1080p 30 (1920x1080, 30.000 fps)
Found mode 'Hi50': HD 1080i 50 (1920x1080, 25.000 fps, interlaced [TFF])
Found mode 'Hi59': HD 1080i 59.94 (1920x1080, 29.970 fps, interlaced [TFF])
Found mode 'Hi60': HD 1080i 60 (1920x1080, 30.000 fps, interlaced [TFF])
Found mode 'Hp50': HD 1080p 50 (1920x1080, 50.000 fps)
Found mode 'Hp59': HD 1080p 59.94 (1920x1080, 59.940 fps)
Found mode 'Hp60': HD 1080p 60 (1920x1080, 60.000 fps)
Found mode 'hp50': HD 720p 50 (1280x720, 50.000 fps)
Found mode 'hp59': HD 720p 59.94 (1280x720, 59.940 fps)
Found mode 'hp60': HD 720p 60 (1280x720, 60.000 fps)
Found mode '2k23': 2K 23.98 (2048x1556, 23.976 fps)
Found mode '2k24': 2K 24 (2048x1556, 24.000 fps)
Found mode '2k25': 2K 25 (2048x1556, 25.000 fps)
Return to “VLC stream-output (sout)”
Users browsing this forum: No registered users and 10 guests