hauppage

About encoding, codec settings, muxers and filter usage
Guest

hauppage

Postby Guest » 14 Nov 2004 15:07

I have browsed around and read the userguide on videolan.org but I don't understand how to stream the video from my hauppage tv capture card to another computer on my network both using the newest version of videolan..
I downloaded the mini sap server but I don't know how to run it and the tutorials aren't very informative, I would appreciate it if someone could explain how I can go about this..
Thanks.

pontypool
Blank Cone
Blank Cone
Posts: 28
Joined: 14 Nov 2004 14:50

Postby pontypool » 15 Nov 2004 13:26

Is there at least a more user friendly tutorial for setting this up? the one provided stinks.

jix
Blank Cone
Blank Cone
Posts: 23
Joined: 13 Oct 2004 14:22
Location: Ecole Centrale Paris, France

Postby jix » 22 Nov 2004 19:44

You can use VLC to stream for your happauge card and the MiniSapServer is only required with VLS.
If you have a graphic interface, you can use the streaming wizard.
Else you have just to follow the streaming howto : http://www.videolan.org/doc/videolan-ho ... #id2533641

If you have more questions, precise what is too complex so that we can improve the documentation.

catalyst_au
New Cone
New Cone
Posts: 9
Joined: 20 Oct 2004 03:48

OS

Postby catalyst_au » 29 Nov 2004 02:25

What OS are you using?

markfm
Big Cone-huna
Big Cone-huna
Posts: 1536
Joined: 22 Feb 2004 17:42

Postby markfm » 29 Nov 2004 02:29

On the VLC documentation page, there's also a step-by-step to UDP streaming, using the graphical interface. If the Hauppage is outputting something as MPEG already, you don't have to do the transcoding part.

Guest

Postby Guest » 09 Dec 2004 19:46

i dont know what a graphic interface is... and i think the only time hauppage is producing an mpeg file is when i pause the video, because then there is a memory buffer, that stores the tv to delay what im watching, but ill check out this guide.

Guest

Postby Guest » 09 Dec 2004 19:47

im using xp pro sp1

Guest

Postby Guest » 09 Dec 2004 20:08

ok, after you follow the links to get the kernel patches, you download a file but it doesn't say what to do with it, it looks like some kind of file containing text, so presumeable you replace another one elsewhere, but it just doesn't say.
the command which is supposed to figure out what chip type your tv card is doesn't work, I figured you had to use that in the cmd app, but it didn't do anything there, so that command they gave is useless.
I don't get how someone can create a "tutorial" that gives you a file ending with gz ( first time ive seen this one) and automatically assume you'll know what to do with it.

jix
Blank Cone
Blank Cone
Posts: 23
Joined: 13 Oct 2004 14:22
Location: Ecole Centrale Paris, France

Postby jix » 10 Dec 2004 01:58

Are you using linux or windows ?
The link in the documentation is only for linux.
Under windows, you just have to install the pvr's official hauppauge drivers and then stream with the streaming wizard.

Here's a link to download the drivers for a pvr250-350
http://www.hauppauge.co.uk/pages/suppor ... 0-350.html

Guest

Postby Guest » 10 Dec 2004 23:58

xp pro, ive installed the newest offical drivers but cant get this guide to work for me, can anyone just tell me what settings are working for them? im using a router to connect but im trying to send this video directly to another computer.

richardkfk

Postby richardkfk » 11 Dec 2004 11:57

Once u have the correct TV capture card's driver (eg. WDM audio capture driver and WDM video capture driver) installed onto your
windows XP.

Then it is easy to stream the TV video onto your LAN or other computer.

Open the VLC081's streaming wizard :

File -> Open Capture Device
Select DirectShow
Press the < Refresh list> button,
Video device name = <your capture card's name >
Audio device name = <your catpure card's name>
Video Size = 320x240

you can try other combinations later

Tick the Device properties and tuner properties
Tick the stream output
then press the <Settings> button

From the "Stream output" window,

Tick the UDP,
enter <IP address of the other computer used to watch the TV >
Tick <MPEG TS> as the Encapsulation method.

Tick Videco codec (eg. mp4v 1024kb/s) and Audio codec (eg. mpga and 192kb/s) .

Leave miscellaneous options unchecked.

Press <ok> button from the "stream out" window.

Press <ok> button from the "File Open" window.


Then your video streaming server will be able to stream the TV signal over the LAN to your other computer.



Before u open VLC streaming server , u have to make sure your Haupague TV tuner are tuned to your favourite channel first and then
quit your Haupague TV application.

VLC streaming server and your Haupague tv view/capture application cannot be run at the same time.

have fun !

-ricky321-

Guest

Postby Guest » 12 Dec 2004 02:31

I know i wasnt doing it correctly before, but this doesnt work as vlc just dissapeares once i finalise this setup, but thats probably a computer issue.

Guest

Postby Guest » 12 Dec 2004 03:08

i tried playing a file to myself and that seemed to work, so it must be the configuration of the hauppage pvr 350 pci card.

richardkfk

Postby richardkfk » 13 Dec 2004 02:06

In this situation,

U can try to change the TV capture card's WDM driver from the following :

http://btwincap.sourceforge.net/



Please make sure u read through the installation instruction before changing your WDM driver.

The new driver will override your existing driver and
ur Haupauge TV capture or recording application may not work any more.

To change the TV channels, u have to use an application

DSCALER.

cheers,

-richard-

Guest

Postby Guest » 13 Dec 2004 18:22

these drivers changed nothing, i assumed my chipset was bt848? theres no way to know though.

Guest

Postby Guest » 20 Dec 2004 03:39

I have the Hauppauge PVR250 card running on Windows XP Home SP2

Using the newest version results in choppy audio and very choppy video.

I'm able to get things to work perfectly using version 0.7.2 and a bizarre technique a very helpful "guest".
On the servers side you need to have Windows Media Encoder. I am using version 9.

Phase 1
Open WinTV2000 and select which channel you want to watch

Phase 2
1. Open Windows Media Encoder (WME)
2. Select Broadcast a live event and press OK
3. Select your PVR250 card in the Video field.
4. Select Configure
5. Select Video Properties
6. Click OK to close that window
7. Click OK again to close that window
8. Exit out of WME

Phase 3
Open VLC
1. Select File/Streaming Wizard
2. Select 1. Open
3. On the line with "Video Device Name, click on Refresh list.
4. Select your Hauppuage Card
5. Select OK
6. Select how you want to stream ( I have been using UDP )
7. Click Start

Phase 4
On your client just open the stream.

When mucking around I occasionally lose the sound and I need to start from Phase 2.

I actually prefer the steps in version 0.7.2 to the ones in 0.8.1, but then since it doesn't work in 0.8.1, it doesn't matter.

Wishes:
1. Sure would be nice to not have to go through phases 1 & 2.
2. Sure would be nice to be able to change the channel in VLC

Questions:
I would like to stream to Windows Media Player, anyone know how?


Return to “VLC stream-output (sout)”

Who is online

Users browsing this forum: No registered users and 19 guests