Page 1 of 1
UPNP doesn't work on 2.7.0 release
Posted: 24 Dec 2015 06:42
by boot2k3
I see only the name of my UPNP, but doesn't see anything shared via upnp.
In previous release all was fine.
iOS 9.2
Re: UPNP doesn't work on 2.7.0 release
Posted: 26 Dec 2015 00:11
by fkuehne
What is your UPnP server?
same Problem on 2.7.1 with HDHOMERUN - 4Tuners, Europe
Posted: 01 Jan 2016 23:41
by skogarfoss
pressing the upnp-link leads to the following error:
unable to open mrl:
http://192.168.178.23:5004/auto/v2?dlna
opening the link as a networkstream works (
http://192.168.178.23:5004/auto/v2)
before 2.7 it work perfect.
Error on iPad Pro, latest iOS
Re: UPNP doesn't work on 2.7.0 release
Posted: 02 Jan 2016 15:10
by fkuehne
Hmm, probably an escaping issue due to the ? character. Will look into it - thanks a lot for the report!
Re: same Problem on 2.7.1 with HDHOMERUN - 4Tuners, Europe
Posted: 12 Jan 2016 20:52
by skogarfoss
problem still persists on 2.7.2
Re: UPNP doesn't work on 2.7.0 release
Posted: 12 Jan 2016 21:02
by fkuehne
Yes, regrettably, this issue report arrived after the 2.7.2 deadline. Thanks a lot for re-checking and stay tuned for 2.7.3, which is not too far down the road.
Re: UPNP (HDHomeRun) doesn't work on 2.7.8 release
Posted: 16 Oct 2016 21:25
by soarhevn
Hi Felix, I am running v2.7.8 on iOS 10 (iPhone) and trying to connect to an HD HomeRun Prime. I can see the HDHomeRun listed in the Local Network, and it lists all the channels, but after selecting a channel, I also get the "VLC is unable to open the MRL '
http://192.168.88.40:5004/auto/v3?dlna' message.
As skogarfoss mentioned below, I can open '
http://192.168.88.40:5004/auto/v3' via Network Stream and it works. So perhaps the fix you mentioned about escaping the ? didn't work, or didn't get into a release yet.