[ERROR/pvr] Read error for program "video"

Discussion on the (deprecated) VideoLAN Server application as well as the miniSAPserver stream announcer. This is not about VLC!
Forum rules
Please do not post VLC related questions in this forum category. See the Forum Rules for more information.
ng_heidi@yahoo.com

[ERROR/pvr] Read error for program "video"

Postby ng_heidi@yahoo.com » 21 Apr 2004 01:58

Hi,

I am trying to setup vls to run with Hauppauge WinTV-PRV-250 card. I was able to stream the video from the server to the client if I use the following command:

vls -vv -d udp:10.10.4.157 file:/dev/video0

However, if I was to use a vls.cfg and run with vls -vv -f vls.cfg. It would return the following debug messages:

root@pvr:~# vls -vv -f vls.cfg
VideoLAN Server 0.5.4+cvs20031028 (Jan 20 2004) - (c) 1999-2003 VideoLAN
2004-04-20 15:55:13 [INFO/Vls] Module "channel:file" registered
2004-04-20 15:55:13 [INFO/Vls] Module "channel:network" registered
2004-04-20 15:55:13 [INFO/Vls] Module "mpegreader:file" registered
2004-04-20 15:55:13 [INFO/Vls] Module "mpegconverter:ts2ts" registered
2004-04-20 15:55:13 [INFO/Vls] Module "mpegconverter:ps2ts" registered
2004-04-20 15:55:13 [INFO/Vls] Module "input:local" registered
2004-04-20 15:55:13 [INFO/Vls] Module "input:video" registered
2004-04-20 15:55:13 [INFO/Vls] Module "interface:dummy" registered
2004-04-20 15:55:13 [INFO/Vls] Module "interface:telnet" registered
2004-04-20 15:55:13 [INFO/Vls] Module "interface:native" registered
2004-04-20 15:55:13 [INFO/Vls] Module "trickplay:normal" registered
2004-04-20 15:55:13 [INFO/Vls] Module "input:tcp" registered
2004-04-20 15:55:13 [INFO/Vls] Module "mpegreader:tcp" registered
2004-04-20 15:55:13 [INFO/Vls] Browsing modules in directory "./src/modules"
2004-04-20 15:55:13 [WARN/Vls] Unable to browse directory "./src/modules" : Error: Could not ope
n directory './src/modules': No such file or directory
2004-04-20 15:55:13 [INFO/Vls] Browsing modules in directory "./modules"
2004-04-20 15:55:13 [WARN/Vls] Unable to browse directory "./modules" : Error: Could not open di
rectory './modules': No such file or directory
2004-04-20 15:55:13 [INFO/Vls] Browsing modules in directory "/usr/lib/vls"
2004-04-20 15:55:13 [INFO/Vls] Module "input:dvb" registered
2004-04-20 15:55:13 [INFO/Vls] Module "mpegreader:dvd" registered
2004-04-20 15:55:13 [INFO/Vls] Module "mpegreader:pvr" registered
2004-04-20 15:55:13 [INFO/Vls] Module "mpegreader:dvb" registered
2004-04-20 15:55:13 [INFO/Vls] Channel 'channel1' created
2004-04-20 15:55:13 [INFO/Vls] Starting input 'pvr'
2004-04-20 15:55:13 [INFO/Vls] Input 'pvr' sucessfully initialised
2004-04-20 15:55:13 [INFO/Vls] Starting interface 'dummy'
2004-04-20 15:55:13 [INFO/Vls] Interface 'dummy' sucessfully initialised
2004-04-20 15:55:13 [INFO/Vls] Executing command1 : 'start video channel1 pvr'

Info : card Vanilla iTVC15 card found !
Info : Found Composite 0 (Input number 0)
Found Composite 1 (Input number 1)
Found Composite 2 (Input number 2)
Found Composite 3 (Input number 3)
Found Tuner 0 (Input number 4)
Found Composite 4 (Input number 5) [selected]
Found S-Video 0 (Input number 6)
Found S-Video 1 (Input number 7)
Found S-Video 2 (Input number 8)
Found S-Video 3 (Input number 9)
Info : Window 0x0 25 fps, NTSC
Info: Encoding at 7000 kbps, VBR, max 9000 kbps

2004-04-20 15:55:13 [ERROR/pvr] Read error for program "video"

Here's the vls.cfg I used:
# Application wide settings
begin "vls"
logfile = "./vls.log" # log file
end

# Streams sources declaration
begin "inputs"
pvr = "video" # Video input example (mpeg encoder)
end

begin "input"
trickplay = "normal"
end

begin "pvr"
cardtype = "pvr"
device = "/dev/video0" # Video4linux device (default is "/dev/video")
type = "mpeg2-ps" # Stream type (default is "Mpeg2-PS")
inputnumber = "5"
bitrate = "7000"
maxbitrate ="9000"
bitratemode = "vbr"
norm = "ntsc"
end

begin "channels"
channel1 = "network"
end


begin "channel1" # unicast example
dsthost = "10.10.4.157" # destination host
dstport = "1234" # destination port
end

begin "launchonstartup"
command1 = "start video channel1 pvr"
end


Please advise! Thanks in advance.
Heidi

Guest

Postby Guest » 12 May 2004 00:35

I have the same error with VideoLAN Server 0.5.5-cvs.
What is that?!


Return to “VideoLAN Server and miniSAPserver”

Who is online

Users browsing this forum: No registered users and 46 guests