I'm trying to acquire a video from my dc10plus card and send it into my lan. My OS is linux redhat 9.
I try to use vls. But when i launch it, i'll obtain this error
Code: Select all
VideoLAN Server v 0.5.6 (Aug 30 2004) - (c)1999-2003 VideoLAN
2004-08-30 17:16:39 [INFO/Vls] Module "channel:file" registered
2004-08-30 17:16:39 [INFO/Vls] Module "channel:network" registered
2004-08-30 17:16:39 [INFO/Vls] Module "mpegreader:file" registered
2004-08-30 17:16:39 [INFO/Vls] Module "mpegconverter:ts2ts" registered
2004-08-30 17:16:39 [INFO/Vls] Module "mpegconverter:ps2ts" registered
2004-08-30 17:16:39 [INFO/Vls] Module "input:local" registered
2004-08-30 17:16:39 [INFO/Vls] Module "input:video" registered
2004-08-30 17:16:39 [INFO/Vls] Browsing modules in directory "."
2004-08-30 17:16:39 [INFO/Vls] Browsing modules in directory "/usr/local/lib/videolan/vls"
2004-08-30 17:16:39 [INFO/Vls] Channel 'channel1' created
2004-08-30 17:16:39 [ERROR/Vls] Input type "v4l" invalid
2004-08-30 17:16:39 [INFO/Vls] Executing command1 : 'start v4l channel1 dc10plus'
2004-08-30 17:16:39 [WARN/Vls] Unknown pgrm v4l
2004-08-30 17:16:39 [WARN/Vls] input doesn't existMy vls.cfg is:
Code: Select all
#.cfg (VLS configuration file)
# Example of the VideoLAN HOWTO for the Video for Linux input
BEGIN "Inputs"
dc10plus = "v4l"
END
BEGIN "dc10plus"
# V4L device
Device = "/dev/video0"
# Channel Source : Webcam is often "0"
# TV Card, may be Tuner(0), Composite(1), Svideo(2)
Channel = "0"
# Norm: PAL=0, NTSC=1, SECAM=2
Norm = "0"
# Size possibilities: can be either:
# - empty string : default size
# - width x height
# - subQCIF(128x96), QSIF(160.120), QCIF(176x144), SIF(320x240),
# CIF(352x288), VGA (640x480)
Size = ""
# DeInterlace: "0" = no ; "1" = yes
DeInterlace = "0"
# Video compression format: "mpeg1" or "mpeg4"
Compression = "mpeg4"
# Video bitrate (approx.) in kbps
Bitrate = "500"
# Quality: "1.0" (good) to "31.0" (bad)
Quality = "1.0"
# Sound device
AudioDevice = "/dev/dsp"
# Audio compression format: "mp2", "mp3" or "ogg"
AudioCompression = "mp2"
# Audio bitrate in kpbs
AudioBitrate = "64"
# Audio frequency ("16000", "22050", "24000", "32000", "44100" or "48000")
AudioFreq = "16000"
# Audio channel: "1" = mono ; "2" = stereo
AudioChannel = "2"
END
BEGIN "Channels"
channel1 = "network"
END
BEGIN "channel1"
# Unicast or multicast IP address
DstHost = "192.168.1.255"
# Destination port
DstPort = "1234"
# If it's a multicast IP address, uncomment the line below
Type = "multicast"
# If it's a multicast IP address, set the "Time To Live" below
TTL = "12"
END
BEGIN "LaunchOnStartUp"
command1 = "start v4l channel1 dc10plus"
ENDThanks for your help
