Totaly Lost... trying to get TV-tunercard working

For questions and discussion that is NOT (I repeat NOT) specific to a certain Operating System.
the_blast
New Cone
New Cone
Posts: 1
Joined: 02 Jun 2010 10:19

Totaly Lost... trying to get TV-tunercard working

Postby the_blast » 02 Jun 2010 15:07

Hi.
Im trying for over a week now to get VLC working with my ( asus ps3-100) tv- tuner card.
With the software which came with the card it is all functional.

However when i try to use VLC ( if i get it working i would like to stream some tv to a second PC ) i cannot get any station to work.
capture card = asus ps3-100 TV tuner card (713X bda analog capture card)
Running VLC latest build on a P4 2.4G WinXP Sp3 Machine.
The card is connected to cable not an antenna.
Country code - 31
Using the GUI to get it configured.
All i get is a black window.

I have been searching this forum for a solution but was not able to find one.
The output of the message window doesnt ring a bell with me what the problem might be
Would somebody be so nice to push me forward !
Thanx in adv
Frank

Below is the output of the messgae window.

Code: Select all

qt4 debug: :dshow-caching=200 :dshow-vdev=713x BDA Analog Capture :dshow-adev=713x BDA Analog Audio Capture :dshow-size= :dshow-chroma= :dshow-fps=25 :no-dshow-config :no-dshow-tuner :dshow-tuner-channel=0 :dshow-tuner-country=31 :dshow-tuner-input=1 :dshow-video-input=-1 :dshow-video-output=-1 :dshow-audio-input=-1 :dshow-audio-output=-1 :dshow-amtuner-mode=1 :dshow-audio-channels=0 :dshow-audio-samplerate=0 :dshow-audio-bitspersample=0 main warning: resampling stopped after 4351095 usec (drift: -29507) main warning: buffer is 41388 late, triggering upsampling main warning: resampling stopped after 6531345 usec (drift: -18440) qt4 warning: Input option: dshow-vdev=713x BDA Analog Capture qt4 warning: Input option: dshow-adev=713x BDA Analog Audio Capture:dshow-caching=200 qt4 warning: Input option: dshow-vdev=713x BDA Analog Capture qt4 warning: Input option: dshow-adev=713x BDA Analog Audio Capture qt4 warning: Input option: dshow-size= qt4 warning: Input option: dshow-chroma= qt4 warning: Input option: dshow-fps=25 qt4 warning: Input option: no-dshow-config qt4 warning: Input option: no-dshow-tuner qt4 warning: Input option: dshow-tuner-channel=0 qt4 warning: Input option: dshow-tuner-country=31 qt4 warning: Input option: dshow-tuner-input=1 qt4 warning: Input option: dshow-video-input=-1 qt4 warning: Input option: dshow-video-output=-1 qt4 warning: Input option: dshow-audio-input=-1 qt4 warning: Input option: dshow-audio-output=-1 qt4 warning: Input option: dshow-amtuner-mode=1 qt4 warning: Input option: dshow-audio-channels=0 qt4 warning: Input option: dshow-audio-samplerate=0 qt4 warning: Input option: dshow-audio-bitspersample=0 main debug: adding item `dshow://' ( dshow:// ) main debug: dying input qt4 debug: Adding a new MRL to recent ones: dshow:// main debug: control type=0 main debug: control: stopping input main debug: dying input main debug: thread times: real 1m53.843750s, kernel 0m0.406250s, user 0m1.343750s main debug: removing module "rawvideo" main debug: killing decoder fourcc `RV24', 0 PES in FIFO main debug: [0] 2 0 main debug: [1] 2 0 main debug: [2] 2 0 main debug: [3] 4 0 main debug: [4] 4 0 main debug: [5] 4 0 main debug: [6] 4 0 main debug: [7] 4 0 main debug: [8] 4 0 main debug: [9] 4 0 main debug: [10] 2 0 main debug: [11] 2 0 main debug: [12] 2 0 main debug: [13] 2 0 main debug: [14] 0 0 main debug: [15] 4 0 main debug: saving a free vout main debug: thread times: real 1m53.828125s, kernel 0m0.125000s, user 0m1.343750s main debug: removing module "araw" main debug: killing decoder fourcc `araw', 0 PES in FIFO main debug: removing module "converter_float" main debug: removing module "scaletempo" main debug: removing module "bandlimited_resampler" aout_directx debug: closing audio device aout_directx debug: DirectSoundThread exiting main debug: thread ended main debug: thread times: real 1m53.812500s, kernel 0m0.093750s, user 0m0.015625s main debug: removing module "aout_directx" main debug: removing module "converter_float" main debug: removing module "float32_mixer" main debug: releasing aout dshow debug: CaptureFilter::Pause dshow debug: CaptureFilter::Pause dshow debug: CaptureFilter::Stop dshow debug: CapturePin::EndFlush dshow debug: CaptureFilter::Stop dshow debug: CapturePin::EndFlush dshow debug: releasing DirectShow dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::ConnectedTo [OK] dshow debug: CapturePin::Disconnect [OK] dshow debug: CaptureFilter::SetSyncSource dshow debug: CaptureFilter::JoinFilterGraph dshow debug: CaptureFilter::GetState 0 dshow debug: CaptureFilter::~CaptureFilter dshow debug: CapturePin::~CapturePin dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::ConnectedTo [OK] dshow debug: CapturePin::Disconnect [OK] dshow debug: CaptureFilter::SetSyncSource dshow debug: CaptureFilter::JoinFilterGraph dshow debug: CaptureFilter::GetState 0 dshow debug: CaptureFilter::~CaptureFilter dshow debug: CapturePin::~CapturePin main debug: removing module "dshow" main debug: Program doesn't contain anymore ES main debug: dead input main debug: thread ended main debug: thread times: real 14m33.703125s, kernel 0m0.531250s, user 0m1.546875s qt4 debug: IM: Deleting the input qt4 debug: Updating the geometry qt4 debug: Updating the geometry qt4 debug: Qt: Entering Fullscreen main debug: TIMER input launching for 'dshow://' : 759358.598 ms - Total 759358.598 ms / 1 intvls (Avg 759358.562 ms) main debug: processing request item dshow:// node null skip 0 main debug: rebuilding array of current - root Playlist main debug: rebuild done - 2 items, index 1 main debug: starting new item main debug: creating new input thread main debug: Creating an input for 'dshow://' main debug: thread started main debug: using timeshift granularity of 50 MBytes main debug: using timeshift path 'C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp' main debug: thread (input) created at priority 1 (../.././src/input/input.c:230) main debug: `dshow://' gives access `dshow' demux `' path `' main debug: creating demux: access='dshow' demux='' path='' main debug: looking for access_demux module: 1 candidate dshow debug: dshow-vdev: 713x BDA Analog Capture dshow debug: dshow-adev: 713x BDA Analog Audio Capture qt4 debug: IM: Setting an input qt4 debug: Updating the geometry qt4 debug: Updating the geometry dshow debug: found device: 713x BDA Analog Capture dshow debug: asking for device: 713x BDA Analog Capture dshow debug: asked for 713x BDA Analog Capture, binding to 713x BDA Analog Capture dshow debug: using device: 713x BDA Analog Capture dshow debug: EnumDeviceCaps: input pin: Analog Video In dshow debug: EnumDeviceCaps: input pin: Analog Audioinput dshow debug: EnumDeviceCaps: output pin: Capture dshow debug: EnumDeviceCaps: output pin: VBI dshow debug: EnumDeviceCaps: output pin: Audio dshow debug: EnumDeviceCaps: trying pin Capture dshow debug: EnumDeviceCaps: input pin default format configured dshow debug: EnumDeviceCaps: input pin accepts chroma: RV24, width:320, height:240, fps:25.000000 dshow debug: CaptureFilter::JoinFilterGraph dshow debug: connecting filters dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::ConnectedTo [not connected] dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::QueryFilterInfo dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::QueryAccept [OK] (width=320, height=240, chroma=RV24, fps=25.000000) dshow debug: CapturePin::ReceiveConnection [OK] dshow debug: CapturePin::QueryDirection dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::ConnectedTo [OK] dshow debug: CaptureFilter::EnumPins dshow debug: found existing route for output 0 (type Video Decoder) to input 0 (type Video Tuner) dshow debug: crossbar at depth 0, found route for output 0 (type Video Decoder) to input 0 (type Video Tuner) dshow debug: ConnectFilters: graph_builder2 available. dshow debug: filters connected successfully ! dshow debug: tuner config: channel 0, country 31, input type 1 dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::ConnectedTo [OK] dshow debug: MEDIATYPE_Video dshow debug: selected video pin accepts format: RV24 dshow debug: found device: 713x BDA Analog Audio Capture dshow debug: found device: SoundMAX Digital Audio dshow debug: asking for device: 713x BDA Analog Audio Capture dshow debug: asked for 713x BDA Analog Audio Capture, binding to 713x BDA Analog Audio Capture dshow debug: using device: 713x BDA Analog Audio Capture dshow debug: EnumDeviceCaps: output pin: Capture dshow debug: EnumDeviceCaps: input pin: Capture dshow debug: EnumDeviceCaps: trying pin Capture dshow debug: EnumDeviceCaps: input pin default format configured dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:44100 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:44100 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:44100 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:32000 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:32000 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:22050 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:22050 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:11025 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:11025 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:8000 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:8000 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:44100 bits/sample:8 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:44100 bits/sample:8 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:22050 bits/sample:8 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:22050 bits/sample:8 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:11025 bits/sample:8 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:11025 bits/sample:8 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:8000 bits/sample:8 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:8000 bits/sample:8 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:48000 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:48000 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:96000 bits/sample:16 dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:96000 bits/sample:16 dshow debug: CaptureFilter::JoinFilterGraph dshow debug: connecting filters dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::ConnectedTo [not connected] dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::QueryFilterInfo dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::QueryDirection dshow debug: CapturePin::QueryAccept [OK] (channels=2, samples/sec=44100, bits/samples=16, format=araw) dshow debug: CapturePin::ReceiveConnection [OK] dshow debug: CapturePin::NotifyAllocator dshow debug: filters connected successfully ! dshow debug: tuner config: channel 0, country 31, input type 1 dshow debug: couldn't find tuner interface dshow debug: MEDIATYPE_Audio dshow debug: selected audio pin accepts format: araw dshow debug: crossbar at depth 0, routed video output 0 to video input 0 dshow debug: crossbar at depth 0, routed audio output 1 to audio input 3 dshow debug: Playing... dshow debug: CapturePin::QueryPinInfo dshow debug: CaptureFilter::EnumPins dshow debug: CaptureFilter::Pause dshow debug: CaptureFilter::Run dshow debug: CaptureFilter::Run main debug: selecting program id=0 main debug: using access_demux module "dshow" main debug: TIMER module_need() : 1606.529 ms - Total 1606.529 ms / 1 intvls (Avg 1606.529 ms) main debug: looking for a subtitle file in C:\Program Files\VideoLAN\VLC\ main debug: looking for decoder module: 35 candidates main debug: using decoder module "rawvideo" main debug: TIMER module_need() : 1.487 ms - Total 1.487 ms / 1 intvls (Avg 1.487 ms) main debug: thread (decoder) created at priority 0 (../.././src/input/decoder.c:315) qt4 debug: Updating the geometry qt4 debug: Updating the geometry qt4 debug: Updating the geometry qt4 debug: Updating the geometry qt4 debug: Updating the geometry qt4 debug: Updating the geometry main debug: thread started main debug: looking for decoder module: 35 candidates araw debug: samplerate:44100Hz channels:2 bits/sample:16 main debug: using decoder module "araw" main debug: TIMER module_need() : 1.030 ms - Total 1.030 ms / 1 intvls (Avg 1.030 ms) main debug: thread (decoder) created at priority 2 (../.././src/input/decoder.c:315) qt4 debug: Updating the geometry qt4 debug: Updating the geometry main debug: thread started main debug: `dshow://' successfully opened qt4 debug: Updating the geometry qt4 debug: Updating the geometry main debug: Buffering 0% main error: Invalid PCR value in ES_OUT_SET_(GROUP_)PCR ! main debug: reusing aout main debug: looking for audio output module: 3 candidates aout_directx debug: OpenAudio aout_directx debug: found device: Primary Sound Driver aout_directx debug: found device: SoundMAX Digital Audio main debug: trying to reuse free vout main debug: reusing provided vout qt4 debug: Qt: Entering Fullscreen main debug: End of video preroll freetype debug: using fontsize: 15 main debug: Received first picture dshow debug: CaptureFilter::EnumPins dshow debug: CaptureFilter::EnumPins main debug: Buffering 1% main debug: Buffering 18% main debug: Buffering 37% main debug: Buffering 55% main debug: Buffering 74% aout_directx debug: device supports 2 channels (DEFAULT!) main debug: Buffering 58% aout_directx debug: device supports 1 channel aout_directx debug: Windows says your SpeakerConfig is stereo aout_directx debug: creating DirectSoundThread main debug: thread started aout_directx debug: DirectSoundThread ready main debug: thread (DirectSound Notification Thread) created at priority 15 (../../.././modules/audio_output/directx.c:427) main debug: using audio output module "aout_directx" main debug: TIMER module_need() : 225.145 ms - Total 225.145 ms / 1 intvls (Avg 225.145 ms) main debug: output 's16l' 44100 Hz Stereo frame=1 samples/4 bytes main debug: mixer 'fl32' 44100 Hz Stereo frame=1 samples/8 bytes main debug: filter(s) 'fl32'->'s16l' 44100 Hz->44100 Hz Stereo->Stereo main debug: looking for audio filter module: 24 candidates main debug: using audio filter module "converter_float" main debug: TIMER module_need() : 0.414 ms - Total 0.414 ms / 1 intvls (Avg 0.414 ms) main debug: found a filter for the whole conversion main debug: looking for audio mixer module: 3 candidates main debug: using audio mixer module "float32_mixer" main debug: TIMER module_need() : 0.260 ms - Total 0.260 ms / 1 intvls (Avg 0.260 ms) main debug: input 's16l' 44100 Hz Stereo frame=1 samples/4 bytes main debug: looking for audio filter module: 1 candidate scaletempo warning: bad input or output format main warning: no audio filter module matching "scaletempo" could be loaded main debug: TIMER module_need() : 0.285 ms - Total 0.285 ms / 1 intvls (Avg 0.285 ms) main debug: looking for audio filter module: 1 candidate scaletempo debug: format: 44100 rate, 2 nch, 4 bps, fl32 scaletempo debug: params: 30 stride, 0.200 overlap, 14 search scaletempo debug: 1.000 scale, 1323.000 stride_in, 1323 stride_out, 1059 standing, 264 overlap, 617 search, 2204 queue, fl32 mode main debug: using audio filter module "scaletempo" main debug: TIMER module_need() : 1.035 ms - Total 1.035 ms / 1 intvls (Avg 1.035 ms) main debug: filter(s) 's16l'->'fl32' 44100 Hz->44100 Hz Stereo->Stereo main debug: looking for audio filter module: 24 candidates main debug: using audio filter module "converter_float" main debug: TIMER module_need() : 0.294 ms - Total 0.294 ms / 1 intvls (Avg 0.294 ms) main debug: found a filter for the whole conversion main debug: filter(s) 'fl32'->'fl32' 48510 Hz->44100 Hz Stereo->Stereo main debug: looking for audio filter module: 24 candidates main debug: using audio filter module "bandlimited_resampler" main debug: TIMER module_need() : 1.036 ms - Total 1.036 ms / 1 intvls (Avg 1.036 ms) main debug: found a filter for the whole conversion main debug: End of audio preroll main debug: Stream buffering done (223 ms in 332 ms) main debug: Decoder buffering done in 0 ms main warning: PTS is out of range (-12171), dropping buffer main warning: PTS is out of range (-35359), dropping buffer main debug: control type=1 main debug: thread (es out timeshift) created at priority 1 (../.././src/input/es_out_timeshift.c:743) main debug: thread started

kovezett
Blank Cone
Blank Cone
Posts: 51
Joined: 12 Mar 2009 19:57

Re: Totaly Lost... trying to get TV-tunercard working

Postby kovezett » 08 Jun 2010 14:50

VLC cannot initialise analogue tv cards, so launch your tv player software first. (Or Virtualdub in capture mode).
:dshow-tuner-channel=0
Also, you have to choose a channel: Media - Open Capture Device - Advanced Options - Tuner TV Channel.


Return to “General VLC media player Troubleshooting”

Who is online

Users browsing this forum: No registered users and 39 guests