Help playing DVB-S
Posted: 11 Nov 2008 19:38
by flanagann
Hi! I'm trying to play DVB-S channels with VLC but I'm having some problems.
Data from a DVB-S channel:
Frec: 12109000
Polarization: H
FEC: 3/4
Symbolrate: 27500000
PIDS - VIDEO 2901 - PCR 2901 - PMT 2800 - TeleText 2904
PIDS - AUDIO 2902 and 2903
I set frecuency and symbolrate values but I cannot play the channel. It plays perfectly in other DVB-S programs, so it must be some other advanced options I need to configure. Do I need to configure eache Satellite option (height, azimut...)??
I also tried via command line with the same results.
Any help is appreciated
Re: Help playing DVB-S
Posted: 13 Nov 2008 11:14
by flanagann
Help please!!
Re: Help playing DVB-S
Posted: 26 Nov 2008 12:35
by flanagann
Trying to play
dvb-s:// :dvb-frequency=12109000 :dvb-srate=27500000
Message Log:
main debug: starting new item
main debug: processing request item dvb-s:// node Lista de reproducción skip 0
main debug: resyncing on dvb-s://
main debug: dvb-s:// is at 11
main debug: creating new input thread
main debug: Creating an input for 'dvb-s://'
main debug: thread started
main debug: waiting for thread initialization
main debug: `dvb-s://' gives access `dvb-s' demux `' path `'
main debug: thread 6744 (input) created at priority 1 (input/input.c:370)
qt4 debug: Updating the stream status: 3
main debug: creating demux: access='dvb-s' demux='' path=''
main debug: looking for access_demux module: 0 candidates
main warning: no access_demux module matched "dvb-s"
main debug: TIMER module_Need() : 0.298 ms - Total 0.298 ms / 1 intvls (Avg 0.298 ms)
main debug: creating access 'dvb-s' path=''
main debug: looking for access module: 1 candidate
bda debug: FindFilter: Connected TechnoTrend BDA/DVB-S Tuner
bda debug: FindFilter: Connected TechnoTrend BDA/DVB Capture
bda debug: FindFilter: Connected BDA MPEG2 Transport Information Filter
bda debug: Register: registered Graph: VLC BDA Graph 0666cb38 Pid 000000d0
main debug: using access module "bda"
main debug: TIMER module_Need() : 576.444 ms - Total 576.444 ms / 1 intvls (Avg 576.444 ms)
qt4 debug: New Event: type 1103
qt4 debug: Updating the stream status: 2
main debug: Using AStream*Block
main debug: pre buffering
bda warning: BDA ReadBuffer: Sample Discontinuity. 0x 0
main debug: received first data for our buffer
main debug: prebuffering done 0 bytes in 0s - 0 kbytes/s
main error: cannot pre fill buffer
main warning: cannot create a stream_t from access
qt4 debug: New Event: type 1103
qt4 debug: Updating the stream status: 9
main debug: finished input
main debug: dying input
qt4 debug: Updating the stream status: 8
main debug: dying input
main debug: dying input
main debug: removing module "bda"
main debug: thread ended
main debug: dead input
main debug: thread times: real 0m0.843750s, kernel 0m0.296875s, user 0m0.015625s
main debug: thread 6744 joined (playlist/engine.c:244)
main debug: TIMER input launching for 'dvb-s://' : 879.154 ms - Total 879.154 ms / 1 intvls (Avg 879.154 ms)
main debug: starting new item
main debug: changing item without a request (current 11/12)
main debug: nothing to play
Suggestions?
Re: Help playing DVB-S
Posted: 26 Nov 2008 17:45
by Lorni
Try like this:
set :dvb-polarisation as "H" or "V"
and rate 27500 (not 27500000)
vlc.exe dvb-s:// :dvb-frequency=12109000 :dvb-polarisation="V" :dvb-srate=27500
Re: Help playing DVB-S
Posted: 01 Dec 2008 11:31
by flanagann
Try like this:
set :dvb-polarisation as "H" or "V"
and rate 27500 (not 27500000)
vlc.exe dvb-s:// :dvb-frequency=12109000 :dvb-polarisation="V" :dvb-srate=27500
Still not working
Did you get yours working?