DVDs pause and hang

For questions and discussion that is NOT (I repeat NOT) specific to a certain Operating System.
Guest

DVDs pause and hang

Postby Guest » 15 Feb 2004 16:57

Hi,

I have had VLC running for about two weeks now. So far I love it. It is nice to have one player for ALL of my file types, that runs on ALL of my boxes. I have run into a new hiccup that I can not seem to resolve my self.

When I play DVDs they pause for about .5 sec. Every 1 -2 seconds. I ran top to see if my system resources were being over run. With the DVD playing it showed the processor %50 idle and 180 MB of RAM listed as free. So I am assuming this is not do to a lack of hardware.


I did some reading on the forum and found a listing that talking about making the buffer larger. So I went to Settings > Preferences > Plug ins > access_file and set Caching value in ms to 16000 (the max value). When that did not work I set ALL of the Caching values under Plugins to 16000. It did not make a difference.

I also found a setting under Settings > Preferences > General settings > Allow VLC to run with real time priority. This did not help either.

Since I did not see many other postings on the forum about this I assume this is a problem with my PC and not VLC. Still any ideas would be helpful.



OS : Suse 9.0
Kernel : 2.4.21
CPU : Athalon 2500
RAM : 1GB
Video Card : ATI 7000 (64MB)
VLC : 0.7 [Installed from Redhat rpm] see : viewtopic.php?t=1092&sid=ca95424bbcc5b1 ... 0c4195e1e6 for details

The DJ
Cone Master
Cone Master
Posts: 5987
Joined: 22 Nov 2003 21:52
VLC version: git
Operating System: Mac OS X
Location: Enschede, Holland
Contact:

Postby The DJ » 16 Feb 2004 23:22

access_file only works for files.
There is no buffer setting for the DVD plugin atm.
Don't use PMs for support questions.

pronerd
Blank Cone
Blank Cone
Posts: 24
Joined: 06 Feb 2004 04:14
Location: Kansas City, MO

Conclusion

Postby pronerd » 16 Mar 2004 05:36

I never was able to resolve this. I has concluded that it was an issue with my box. To verify this I install DVD support for Xine, and it does the same thing, although to a much milder degree.

I assume this is related to my Video driver. There is not actually a Linux video driver for my card(ATI 7000). I am using the driver for the ATI 7500.

Gibalou
Big Cone-huna
Big Cone-huna
Posts: 608
Joined: 26 Nov 2003 10:59

Postby Gibalou » 16 Mar 2004 09:17

Make sure your DVD drive has DMA transfers enabled (with hdparm).

pronerd
Blank Cone
Blank Cone
Posts: 24
Joined: 06 Feb 2004 04:14
Location: Kansas City, MO

FIEXED!!!!!!!!!!!!!!

Postby pronerd » 17 Mar 2004 06:01

That did it!!!

hdparm -d1 /dev/dvd

BEFORE :
Timing buffer-cache reads: 1444 MB in 2.00 seconds = 722.00 MB/sec
Timing buffered disk reads: 10 MB in 3.13 seconds = 3.20 MB/sec

AFTER :
Timing buffer-cache reads: 1456 MB in 2.00 seconds = 727.64 MB/sec
Timing buffered disk reads: 12 MB in 3.50 seconds = 3.43 MB/sec


Return to “General VLC media player Troubleshooting”

Who is online

Users browsing this forum: No registered users and 54 guests