VLC multi-part rar support is BROKEN in 2.0 and 2.0.1

For questions and discussion that is NOT (I repeat NOT) specific to a certain Operating System.
koksalt
New Cone
New Cone
Posts: 9
Joined: 19 Feb 2012 14:29

VLC multi-part rar support is BROKEN in 2.0 and 2.0.1

Postby koksalt » 19 Feb 2012 14:45

Seems like the support for playing multi-part/spanned archives is broken in VLC 2.0. It was working (quite) fine in version 1.11.X.

It plays the first file of the archvie ( .rar) , but it doesn't contniue to .r00, r01 ... etc It just stops. Doesn't matter if its an avi or mkv file and all files are uncompressed.

I am using windows 7 64 bit, but I have the same problem on OSX 10.7. So it seems to be platform independent.

I have also tried the latest nightly of 2.1 and it has the same problem :(

Update: Still broken i 2.0.1 Now it stops later on, always at the same time, but different times in different videos. One movie stops at X minutes, another stops at Y minutes.
If you have this problem please confirm it in thread and tell what version operative system you are using.

Update: Seems to be fixed for the next release of VLC :).
Last edited by koksalt on 02 May 2012 21:16, edited 6 times in total.

Jean-Baptiste Kempf
Site Administrator
Site Administrator
Posts: 37523
Joined: 22 Jul 2005 15:29
VLC version: 4.0.0-git
Operating System: Linux, Windows, Mac
Location: Cone, France
Contact:

Re: VLC multi-part rar support is BROKEN in 2.0

Postby Jean-Baptiste Kempf » 19 Feb 2012 18:46

OK.
Jean-Baptiste Kempf
http://www.jbkempf.com/ - http://www.jbkempf.com/blog/category/Videolan
VLC media player developer, VideoLAN President and Sites administrator
If you want an answer to your question, just be specific and precise. Don't use Private Messages.

Sid32
New Cone
New Cone
Posts: 3
Joined: 06 Dec 2011 15:16

Re: VLC multi-part rar support is BROKEN in 2.0

Postby Sid32 » 19 Feb 2012 21:22

Been running the nightlies and now 2.0.1 - ubuntu 11.10 and multi-part rar support is not working for me either. Works fine in old 1.11 builds...

koksalt
New Cone
New Cone
Posts: 9
Joined: 19 Feb 2012 14:29

Re: VLC multi-part rar support is BROKEN in 2.0

Postby koksalt » 19 Feb 2012 22:16

There is an ticket on the bug tracker now
https://trac.videolan.org/vlc/ticket/6033

It says Platform(s): MacOS, but its should be all. Maybe someone could update this so that it gets more attention from the devs.

rav3nous
New Cone
New Cone
Posts: 1
Joined: 21 Feb 2012 05:34

Re: VLC multi-part rar support is BROKEN in 2.0

Postby rav3nous » 21 Feb 2012 05:37

Same problem on Windows. Unlike the ticket, for me on Windows 7 X64, it does not indicate the correct duration. Only the duration of the first rar.

Jean-Baptiste Kempf
Site Administrator
Site Administrator
Posts: 37523
Joined: 22 Jul 2005 15:29
VLC version: 4.0.0-git
Operating System: Linux, Windows, Mac
Location: Cone, France
Contact:

Re: VLC multi-part rar support is BROKEN in 2.0

Postby Jean-Baptiste Kempf » 21 Feb 2012 12:24

All in mkvs?
Jean-Baptiste Kempf
http://www.jbkempf.com/ - http://www.jbkempf.com/blog/category/Videolan
VLC media player developer, VideoLAN President and Sites administrator
If you want an answer to your question, just be specific and precise. Don't use Private Messages.

ms-7
Blank Cone
Blank Cone
Posts: 11
Joined: 21 Feb 2012 13:39

Re: VLC multi-part rar support is BROKEN in 2.0

Postby ms-7 » 21 Feb 2012 13:48

Also Same Problem with MKV multipart .001 files !!!
myvideo.mkv.001
myvideo.mkv.002
myvideo.mkv.003
and so on...

VLC 2.0 ONLY playing .001 file duration while Previous Version of VLC 1.xx plays automatically the other files (.002 , .003)

Please Fix this Prob in Newer Version VERY SOON.

ktopaz
New Cone
New Cone
Posts: 8
Joined: 19 Aug 2005 03:07

Re: VLC multi-part rar support is BROKEN in 2.0

Postby ktopaz » 22 Feb 2012 21:53

same issue with rar files here (mostly .avi archived in them) win 7 32 bit
when i drag the first .rar file onto vlc player, it pops up a window saying "Broken or missing AVI Index"
I hit the "Build index then play" button, and it plays and shows the duration of only the first rar.
(vlc 1.0 plays the same archive without any issues)

is there any information i can extract that might help resolving this problem faster?
Think for yourself, question authority

Jean-Baptiste Kempf
Site Administrator
Site Administrator
Posts: 37523
Joined: 22 Jul 2005 15:29
VLC version: 4.0.0-git
Operating System: Linux, Windows, Mac
Location: Cone, France
Contact:

Re: VLC multi-part rar support is BROKEN in 2.0

Postby Jean-Baptiste Kempf » 23 Feb 2012 18:14

There is a bug on that. We hope to fix in 2.0.1
Jean-Baptiste Kempf
http://www.jbkempf.com/ - http://www.jbkempf.com/blog/category/Videolan
VLC media player developer, VideoLAN President and Sites administrator
If you want an answer to your question, just be specific and precise. Don't use Private Messages.

Jean-Baptiste Kempf
Site Administrator
Site Administrator
Posts: 37523
Joined: 22 Jul 2005 15:29
VLC version: 4.0.0-git
Operating System: Linux, Windows, Mac
Location: Cone, France
Contact:

Re: VLC multi-part rar support is BROKEN in 2.0

Postby Jean-Baptiste Kempf » 23 Feb 2012 21:50

This is fixed for 2.0.1
Jean-Baptiste Kempf
http://www.jbkempf.com/ - http://www.jbkempf.com/blog/category/Videolan
VLC media player developer, VideoLAN President and Sites administrator
If you want an answer to your question, just be specific and precise. Don't use Private Messages.

ms-7
Blank Cone
Blank Cone
Posts: 11
Joined: 21 Feb 2012 13:39

Re: VLC multi-part rar support is BROKEN in 2.0

Postby ms-7 » 25 Feb 2012 15:56

This is fixed for 2.0.1
Thank You very much !! :)
When will 2.0.1 will be Released ?

Jean-Baptiste Kempf
Site Administrator
Site Administrator
Posts: 37523
Joined: 22 Jul 2005 15:29
VLC version: 4.0.0-git
Operating System: Linux, Windows, Mac
Location: Cone, France
Contact:

Re: VLC multi-part rar support is BROKEN in 2.0

Postby Jean-Baptiste Kempf » 25 Feb 2012 17:30

next week.
Jean-Baptiste Kempf
http://www.jbkempf.com/ - http://www.jbkempf.com/blog/category/Videolan
VLC media player developer, VideoLAN President and Sites administrator
If you want an answer to your question, just be specific and precise. Don't use Private Messages.

koksalt
New Cone
New Cone
Posts: 9
Joined: 19 Feb 2012 14:29

Re: VLC multi-part rar support is BROKEN in 2.0

Postby koksalt » 01 Mar 2012 18:24

This is fixed for 2.0.1
Thank you, it seems to be fixed, but it's not really. Now it doesn't stop after the first rar, so that is good. Now it stops later on, always at the same time, but different times in different videos. One movie stops at 7 minutes, another stops at 51 minutes. I have only seen it with mkv files, but i don't have any large packaged avi files.

I know that is there is no errors in rar packaging because the videos plays completely with MPC and RARFileSource filter.

With logger i get the following error when the movie stops

Code: Select all

[000000000048cdc8] main playlist: stopping playback [0000000002268d08] mkv demux error: cannot load some cues/chapters/tags etc. (broken seekhead or file) [00000000048cdd68] dts decoder: DTS channels:6 samplerate:48000 bitrate:1536000 Stream with high frequencies VQ coding MKV/Ebml Parser: m_el[mi_level] == NULL MKV/Ebml Parser: Up cannot escape itself
If I re-compress the movies with smaller or larger rar-splits, it still stops at the same time.

If I start the same mkv movie uncompressed, I got the same errors when open the video in the beginning. But it doesnt stop.

Code: Select all

[0000000004a1e798] mkv demux error: cannot load some cues/chapters/tags etc. (broken seekhead or file) [00000000022ea298] dts decoder: DTS channels:6 samplerate:48000 bitrate:1536000 Stream with high frequencies VQ coding MKV/Ebml Parser: m_el[mi_level] == NULL MKV/Ebml Parser: Up cannot escape itself
Seems like its more fault sensitive when playing from rars. But I don't recognize this behavior from VLC 1.X

Tested with nightly 2.1 and 2.01 as of today @ win7 64bit.

Jean-Baptiste Kempf
Site Administrator
Site Administrator
Posts: 37523
Joined: 22 Jul 2005 15:29
VLC version: 4.0.0-git
Operating System: Linux, Windows, Mac
Location: Cone, France
Contact:

Re: VLC multi-part rar support is BROKEN in 2.0

Postby Jean-Baptiste Kempf » 02 Mar 2012 02:36

This is a mkv bug, not a rar one then.
Jean-Baptiste Kempf
http://www.jbkempf.com/ - http://www.jbkempf.com/blog/category/Videolan
VLC media player developer, VideoLAN President and Sites administrator
If you want an answer to your question, just be specific and precise. Don't use Private Messages.

TypX
Developer
Developer
Posts: 290
Joined: 21 Oct 2011 15:59

Re: VLC multi-part rar support is BROKEN in 2.0

Postby TypX » 02 Mar 2012 09:57

Can you share the whole verbose logs?

koksalt
New Cone
New Cone
Posts: 9
Joined: 19 Feb 2012 14:29

Re: VLC multi-part rar support is BROKEN in 2.0

Postby koksalt » 02 Mar 2012 19:51

Can you share the whole verbose logs?
Sure, I love to help

Here is verbose logs of 5 videos, 3 which stops and 2 that don't stops (for comparison).

Note1. The movie always stops at the same time and it doesn't matter if seeking before or not.
Note2. It doesn't matter if I disable video output or audio output. It still stops.
Note3. All videos are mkvs and plays good with MPC and RARFileSource or uncompressed.
Note4. GPU acceleration was enabled during the logs but I got the same result when its was disabled.

Video 1.
Open, plays ok-->then I jump to 55min, still plays ok-> Stops @ 57min
Log: http://pastebin.com/MUPAfhaE

Video 2.
Open, plays ok--> then I jump to 9:11min, still plays ok -> stops at 9min30s
Log: http://pastebin.com/CLaXeKzh

Video 3.
Open, plays ok, stops at 6:37
Log: http://pastebin.com/5GU5u8Ye

4. For comparison: These two works good, (although a got some other errors on with second one, but it doesnt stop)

Code: Select all

http://pastebin.com/65aYBrj9 http://pastebin.com/q1C91f8z
VLC version used: vlc-2.1.0-git-20120301-0403
System: Windows 7 Pro sp1 64 bit

punkso
New Cone
New Cone
Posts: 2
Joined: 19 Mar 2012 21:05

Re: VLC multi-part rar support is BROKEN in 2.0

Postby punkso » 19 Mar 2012 21:35

I have the same exact problem that koksalt described.

I would like to add that this problem only occurs (at least for me) when attempting to play back archives which have been created using RAR-archiving v2.9. When the older archiving from RAR version 2.0 is used, there is no problem. As we know, RAR v2.9 introduced a new method of archive creation.

The newly released official VLC v2.0.1 gives this error message twice when attempting to play back an examplary archive consisting of .rar + .r00-.r92 (sorry, it's in German language):

Code: Select all

Einlesen der Datei fehlgeschlagen: VLC konnte die Datei "C:\xyz\xyz.r93" nicht lesen. (%m)
Notice how it complains that file .r93 was not found even though the archive is complete (unrars fine) and only goes up to .r92 (i.e. VLC expects more files than there actually are)!

Also the seeking in rared videos is considerably slower, if the archive was created using RAR v2.9.

I think I read somewhere that the header structure was changed for RAR v2.9, so my (uneducated) guess would be, that VLC misinterprets the header and expects more files than there are which in turn possibly breaks the seeking.

Also I would like to add that I tried to play back such RAR v2.9-archives using older versions of VLC before and always failed. Only VLC 2.0/2.0.1 enabled the playback of such files (to my knowledge), even though it still is buggy.

koksalt
New Cone
New Cone
Posts: 9
Joined: 19 Feb 2012 14:29

Re: VLC multi-part rar support is BROKEN in 2.0

Postby koksalt » 20 Mar 2012 23:25

I have the same exact problem that koksalt described.

I would like to add that this problem only occurs (at least for me) when attempting to play back archives which have been created using RAR-archiving v2.9. When the older archiving from RAR version 2.0 is used, there is no problem. As we know, RAR v2.9 introduced a new method of archive creation.

The newly released official VLC v2.0.1 gives this error message twice when attempting to play back an examplary archive consisting of .rar + .r00-.r92 (sorry, it's in German language):

Code: Select all

Einlesen der Datei fehlgeschlagen: VLC konnte die Datei "C:\xyz\xyz.r93" nicht lesen. (%m)
Notice how it complains that file .r93 was not found even though the archive is complete (unrars fine) and only goes up to .r92 (i.e. VLC expects more files than there actually are)!
Also the seeking in rared videos is considerably slower, if the archive was created using RAR v2.9.
I think I read somewhere that the header structure was changed for RAR v2.9, so my (uneducated) guess would be, that VLC misinterprets the header and expects more files than there are which in turn possibly breaks the seeking.
Also I would like to add that I tried to play back such RAR v2.9-archives using older versions of VLC before and always failed. Only VLC 2.0/2.0.1 enabled the playback of such files (to my knowledge), even though it still is buggy.
I'm not sure that is the same problem. This thread is about a bug that was introduced in VLC v 2.0. First playback stopped after the first rar, then it was partitally fixed in the alfa and still broken 2.01. What happens is that it stops later on, always at the same time, but different times in different videos. One movie stops at 7 minutes, another stops at 51 minutes, etc. (It doesnt matter if the video was compressed with winrar 2.0 or 2.9)

But yes, On some vidoes I have got the the error you are talking about, it generates the same message, but the moive plays along fine.

Code: Select all

File reading failed: VLC could not open the file "E:\Movie\The.Ghost.Writer.2010.1080p.BluRay.X264-AMIABLE\tgwrit.1080p-amb.r93". (%m)
The weird thing is that only uncompressed archives uses version RAR 2.0, an archive created with version RAR 2.9 means that it was compressed (which is not supported by VLC)...
I'm not able to create a uncompressed rar-archive (store option) other than RAR 2.0 (Using WinRAR 4.11).. I think uncompressed (store option) rar-archives with 2.9 is produced from a buggy and older version of WinRAR.

koksalt
New Cone
New Cone
Posts: 9
Joined: 19 Feb 2012 14:29

Re: VLC multi-part rar support is BROKEN in 2.0 and 2.0.1

Postby koksalt » 02 May 2012 21:13

Great news!

Tried the latest nighly today (vlc-2.1.0-git-20120501-0404) and this bug seems to fixed now! :mrgreen: :mrgreen:

Thanks!

punkso
New Cone
New Cone
Posts: 2
Joined: 19 Mar 2012 21:05

Re: VLC multi-part rar support is BROKEN in 2.0 and 2.0.1

Postby punkso » 02 May 2012 23:56

Indeed, the problem seems to fixed now (apart from the odd error message about "missing rar-files" which are in fact not missing). :) Thanks a lot!

Jean-Baptiste Kempf
Site Administrator
Site Administrator
Posts: 37523
Joined: 22 Jul 2005 15:29
VLC version: 4.0.0-git
Operating System: Linux, Windows, Mac
Location: Cone, France
Contact:

Re: VLC multi-part rar support is BROKEN in 2.0 and 2.0.1

Postby Jean-Baptiste Kempf » 03 May 2012 17:26

Can you try vlc-2.1.0-20120504 as soon it is out ? please? please?
This will allow me to backport the fixes...
Jean-Baptiste Kempf
http://www.jbkempf.com/ - http://www.jbkempf.com/blog/category/Videolan
VLC media player developer, VideoLAN President and Sites administrator
If you want an answer to your question, just be specific and precise. Don't use Private Messages.

koksalt
New Cone
New Cone
Posts: 9
Joined: 19 Feb 2012 14:29

Re: VLC multi-part rar support is BROKEN in 2.0 and 2.0.1

Postby koksalt » 03 May 2012 17:44

Can you try vlc-2.1.0-20120504 as soon it is out ? please? please?
This will allow me to backport the fixes...
Sure, I will try it tomorrow.

koksalt
New Cone
New Cone
Posts: 9
Joined: 19 Feb 2012 14:29

Re: VLC multi-part rar support is BROKEN in 2.0 and 2.0.1

Postby koksalt » 04 May 2012 18:18

vlc-2.1.0-git-20120504-0404-win64 Works
vlc-2.1.0-git-20120504-0008-win32 Works

Jean-Baptiste Kempf
Site Administrator
Site Administrator
Posts: 37523
Joined: 22 Jul 2005 15:29
VLC version: 4.0.0-git
Operating System: Linux, Windows, Mac
Location: Cone, France
Contact:

Re: VLC multi-part rar support is BROKEN in 2.0 and 2.0.1

Postby Jean-Baptiste Kempf » 06 May 2012 03:00

Cool!
Will be in 2.0.2!
Jean-Baptiste Kempf
http://www.jbkempf.com/ - http://www.jbkempf.com/blog/category/Videolan
VLC media player developer, VideoLAN President and Sites administrator
If you want an answer to your question, just be specific and precise. Don't use Private Messages.


Return to “General VLC media player Troubleshooting”

Who is online

Users browsing this forum: No registered users and 14 guests