How to change chroma or output picture to display?

For questions and discussion that is NOT (I repeat NOT) specific to a certain Operating System.
spider84
New Cone
New Cone
Posts: 2
Joined: 08 Jul 2005 08:27

How to change chroma or output picture to display?

Postby spider84 » 08 Jul 2005 08:36

I try view /dev/video0 on my display at Linux 2.6.10 and use as --vout sdl in console.

vlc -vvv v4l:/dev/video1:channel=0:norm=PAL:size=768x576 --no-audio --no-sout-audio --color --width 1024 --heigh 768 --vout sdl

Code: Select all

[00000215] v4l demuxer debug: main device=`/dev/video1' [00000215] v4l demuxer debug: V4L device BT878 video ( *** UNKNOWN/GENER 4 channels 1 audios 48 < w < 924 32 < h < 576 [00000215] v4l demuxer debug: invalid width 0 [00000215] v4l demuxer debug: invalid height 0 [00000215] v4l demuxer debug: setting channel Television(0) 1 tuners flags=0x3 type=0x1 norm=0x0 [00000215] v4l demuxer debug: will use 320x240 [00000215] v4l demuxer debug: v4l device uses brightness: 32768 [00000215] v4l demuxer debug: v4l device uses colour: 32768 [00000215] v4l demuxer debug: v4l device uses hue: 32768 [00000215] v4l demuxer debug: v4l device uses contrast: 32768 [00000215] v4l demuxer debug: v4l device uses frame size: 230400 [00000215] v4l demuxer debug: v4l device uses chroma: RV24 [00000215] v4l demuxer debug: v4l grabbing started [00000215] v4l demuxer debug: added new video es RV24 320x240 .... [00000242] main video output error: no chroma module for RV24 to RGB2 [00000242] main video output debug: thread 131081 (video output) created at priority 0 (src/video_output/video_output.c:453) [00000242] main video output error: video output creation failed
I tryed use --v4l-chroma="I240" , but no effect :(

But next code work fine:

ffmpeg -y -vd /dev/video0 -vcodec msmpeg4 -b 300 -r 25 -s 4cif -tvstd PAL -an /test.avi

Code: Select all

ffmpeg version 0.4.9-pre1, build 4756, Copyright (c) 2000-2004 Fabrice Bellard configuration: --enable-xvid --enable-mp3lame --enable-v4l --enable-gpl --enable-shared --enable-pp built on Jul 8 2005 19:07:46, gcc: 3.4.3 Input #0, video4linux, from '': Duration: N/A, bitrate: N/A Stream #0.0: Video: rawvideo, yuv420p, 704x576, 25.00 fps Output #0, avi, to '/test.avi': Stream #0.0: Video: msmpeg4, yuv420p, 704x576, 25.00 fps, q=2-31, 300 kb/s Stream mapping: Stream #0.0 -> #0.0 [msmpeg4 @ 0xb7ea4010]removing common factors from framerate Press [q] to stop encoding frame= 218 q=0.0 Lsize= 577kB time=8.7 bitrate= 541.9kbits/s video:517kB audio:0kB global headers:0kB muxing overhead 11.622229% Received signal 2: terminating.
vlc -vvv /test.avi --no-audio --no-sout-audio --color--width 1024 --heigh 768 --vout sdl

HELP ME. PLS. :roll:

Spider
Blank Cone
Blank Cone
Posts: 10
Joined: 20 Jun 2005 05:10
Location: Omsk, Russia
Contact:

Postby Spider » 12 Jul 2005 10:15

Help. Pls. Help :(


Return to “General VLC media player Troubleshooting”

Who is online

Users browsing this forum: No registered users and 18 guests