Does VLC work under XP with Nova-T PCI (90002)

For questions and discussion that is NOT (I repeat NOT) specific to a certain Operating System.
polyphemus
Blank Cone
Blank Cone
Posts: 15
Joined: 22 Dec 2004 22:11
Location: UK

Does VLC work under XP with Nova-T PCI (90002)

Postby polyphemus » 26 Apr 2005 11:47

I have been using VLC successfully with a Hauppauge PVR250, under XP.
Now got a Nova-T PCI (DVB-T 90002), and trying to get Freeview with it - with no success to date.

Am using the latest nightly builds.

Has anyone else got this combination working?
- currently feels like beating my head against a wall, and I'd like the pain to stop!
Cheers
P

dionoea
Cone Master
Cone Master
Posts: 5157
Joined: 03 Dec 2003 23:09
Location: Paris, France

Postby dionoea » 26 Apr 2005 16:02

nova-t pci works fine under linux... (i don't know if that helps :) )
Antoine Cellerier
dionoea
(Please do not use private messages for support questions)

Guest

Postby Guest » 26 Apr 2005 22:31

Consider:
1. The UserGuide says "For this, you can use the SVN version of VLC and compile it with ./configure --enable-dvb This feature should still be considered as experimental. You can find it in the official release since the version 0.7.2". - Is this comment out of date, or still current?

As a fullypaid member of the Windoze community, compiling is beyond me ;-(, so I am using the nightly builds as they come....

2. The Nova-T card supports DirectShow (and it appears as "Hauppauge WinTV 88x Video Capture" in VLC).

So, what is the score?

Sigmund
Big Cone-huna
Big Cone-huna
Posts: 893
Joined: 26 Nov 2003 09:38

Postby Sigmund » 26 Apr 2005 23:58

what happens when you try it? do you get damaged video or do you not get anything at all. There is a bug when reading compressed content from directshow devices in 0.8.1, you're probably stumbeling into that. Try a recent snapshot from http://www.videolan.org/~videolan

Guest

Nova-T PCI under XP - not working

Postby Guest » 28 Apr 2005 13:37

I don't get anything at all - not even a 'window'
Here's the log.....
- I have highlit in red two lines that seem scarey to me:
Any thoughts, help etc greatly appreciated
Cheers
P

main debug: control type=0
main debug: control: stopping input
main debug: closing input
dshow debug: CaptureFilter::Pause
dshow debug: CaptureFilter::Pause
dshow debug: CaptureFilter::Stop
dshow debug: CapturePin::EndFlush
dshow debug: CaptureFilter::Stop
dshow debug: CapturePin::EndFlush
dshow debug: Releasing DirectShow
dshow debug: CaptureFilter::EnumPins
dshow debug: CapturePin::QueryDirection
dshow debug: CapturePin::ConnectedTo [OK]
dshow debug: CapturePin::Disconnect [OK]
dshow debug: CaptureFilter::SetSyncSource
dshow debug: CaptureFilter::JoinFilterGraph
dshow debug: CaptureFilter::GetState 0
dshow debug: CaptureFilter::~CaptureFilter
dshow debug: CapturePin::~CapturePin
dshow debug: CaptureFilter::EnumPins
dshow debug: CapturePin::QueryDirection
dshow debug: CapturePin::ConnectedTo [OK]
dshow debug: CapturePin::Disconnect [OK]
dshow debug: CaptureFilter::SetSyncSource
dshow debug: CaptureFilter::JoinFilterGraph
dshow debug: CaptureFilter::GetState 0
dshow debug: CaptureFilter::~CaptureFilter
dshow debug: CapturePin::~CapturePin
main debug: unlocking module "dshow"
main debug: thread times: real 0m12.578125s, kernel 0m0.125000s, user 0m0.078125s
main debug: thread 3652 joined (src/input/input.c:386)
main debug: adding playlist item `dshow://' ( dshow:// )
main debug: creating new input thread
main debug: set input option: dshow-vdev to Hauppauge WinTV 88x Video Capture
main debug: set input option: dshow-config to true
main debug: set input option: dshow-tuner to true
main debug: set input option: dshow-caching to 10
main debug: set input option: dshow-tuner-channel to 2
main debug: set input option: dshow-tuner-country to 44
main debug: set input option: dshow-tuner-input to 2
main debug: waiting for thread completion
main debug: `dshow://' gives access `dshow' demux `' path `'
main debug: creating demux: access='dshow' demux='' path=''
main debug: looking for access_demux module: 1 candidate
main debug: thread 3796 (input) created at priority 1 (src/input/input.c:230)
dshow debug: found device: Hauppauge WinTV 88x Video Capture
dshow debug: using device: Hauppauge WinTV 88x Video Capture
dshow debug: EnumDeviceCaps: output pin: Capture
dshow debug: EnumDeviceCaps: output pin: Preview
dshow debug: EnumDeviceCaps: output pin: VBI
dshow debug: EnumDeviceCaps: input pin: Analog Video In
dshow debug: EnumDeviceCaps: output pin: Output4
dshow debug: EnumDeviceCaps: output pin: Output5
dshow debug: EnumDeviceCaps: input pin: Analog Audio In
dshow debug: EnumDeviceCaps: trying pin Capture
dshow debug: EnumDeviceCaps: input pin accepts chroma: RV24, width:320, height:240
dshow debug: EnumDeviceCaps: input pin accepts chroma: RV24, width:320, height:240
dshow debug: EnumDeviceCaps: input pin accepts chroma: RV24, width:384, height:288
dshow debug: EnumDeviceCaps: input pin accepts chroma: RV24, width:768, height:576
dshow debug: EnumDeviceCaps: input pin accepts chroma: RV32, width:320, height:240
dshow debug: EnumDeviceCaps: input pin accepts chroma: RV32, width:320, height:240
dshow debug: EnumDeviceCaps: input pin accepts chroma: RV32, width:384, height:288
dshow debug: EnumDeviceCaps: input pin accepts chroma: RV32, width:768, height:576
dshow debug: EnumDeviceCaps: input pin accepts chroma: YUY2, width:320, height:240
dshow debug: EnumDeviceCaps: input pin accepts chroma: YUY2, width:320, height:240
dshow debug: EnumDeviceCaps: input pin accepts chroma: YUY2, width:384, height:288
dshow debug: EnumDeviceCaps: input pin accepts chroma: YUY2, width:768, height:576
dshow debug: EnumDeviceCaps: input pin accepts chroma: YVU9, width:320, height:240
dshow debug: EnumDeviceCaps: input pin accepts chroma: YVU9, width:320, height:240
dshow debug: EnumDeviceCaps: input pin accepts chroma: YVU9, width:384, height:288
dshow debug: EnumDeviceCaps: input pin accepts chroma: YVU9, width:768, height:576
dshow debug: EnumDeviceCaps: input pin accepts chroma: UYVY, width:320, height:240
dshow debug: EnumDeviceCaps: input pin accepts chroma: UYVY, width:320, height:240
dshow debug: EnumDeviceCaps: input pin accepts chroma: UYVY, width:384, height:288
dshow debug: EnumDeviceCaps: input pin accepts chroma: UYVY, width:768, height:576
dshow debug: EnumDeviceCaps: input pin accepts chroma: YV12, width:320, height:240
dshow debug: EnumDeviceCaps: input pin accepts chroma: YV12, width:320, height:240
dshow debug: EnumDeviceCaps: input pin accepts chroma: YV12, width:384, height:288
dshow debug: EnumDeviceCaps: input pin accepts chroma: YV12, width:768, height:576
dshow debug: EnumDeviceCaps: input pin accepts chroma: I420, width:320, height:240
dshow debug: EnumDeviceCaps: input pin accepts chroma: I420, width:320, height:240
dshow debug: EnumDeviceCaps: input pin accepts chroma: I420, width:384, height:288
dshow debug: EnumDeviceCaps: input pin accepts chroma: I420, width:768, height:576
dshow debug: EnumDeviceCaps: input pin accepts chroma: RV15, width:320, height:240
dshow debug: EnumDeviceCaps: input pin accepts chroma: RV15, width:320, height:240
dshow debug: EnumDeviceCaps: input pin accepts chroma: RV15, width:384, height:288
dshow debug: EnumDeviceCaps: input pin accepts chroma: RV15, width:768, height:576
dshow debug: CaptureFilter::JoinFilterGraph
dshow debug: connecting filters
dshow debug: CaptureFilter::EnumPins
dshow debug: CapturePin::QueryDirection
dshow debug: CapturePin::ConnectedTo [not connected]dshow debug: CapturePin::QueryPinInfo
dshow debug: CaptureFilter::QueryFilterInfo
dshow debug: CapturePin::QueryPinInfo
dshow debug: CaptureFilter::EnumPins
dshow debug: CapturePin::QueryDirection
dshow debug: CapturePin::QueryDirection
dshow debug: CapturePin::QueryAccept [OK] (width=320, height=240, chroma=I420)
dshow debug: CapturePin::ReceiveConnection [OK]
dshow debug: CapturePin::GetAllocatorRequirements
dshow debug: CapturePin::GetAllocator
dshow debug: CapturePin::NotifyAllocator
dshow debug: CapturePin::QueryPinInfo
dshow debug: CaptureFilter::EnumPins
dshow debug: CapturePin::QueryDirection
dshow debug: CaptureFilter::EnumPins
dshow debug: CapturePin::QueryDirection
dshow debug: CaptureFilter::EnumPins
dshow debug: CapturePin::QueryDirection
dshow debug: CapturePin::ConnectedTo [OK]
dshow debug: CaptureFilter::EnumPins
dshow debug: CaptureFilter::EnumPins
dshow debug: filters connected successfully !
dshow debug: Configuring Device Properties
dshow debug: Showing WDM Video Configuration Pages
dshow debug: CaptureFilter::EnumPins
dshow debug: CaptureFilter::EnumPins
dshow debug: CaptureFilter::EnumPins
dshow debug: CaptureFilter::EnumPins
dshow debug: CapturePin::QueryAccept [OK] (width=320, height=240, chroma=I420)
dshow debug: CapturePin::Disconnect [OK]
dshow debug: CapturePin::QueryDirection
dshow debug: CapturePin::QueryAccept [OK] (width=320, height=240, chroma=I420)
dshow debug: CapturePin::ReceiveConnection [OK]
dshow debug: CapturePin::GetAllocatorRequirements
dshow debug: CapturePin::GetAllocator
dshow debug: CapturePin::NotifyAllocator
dshow debug: tuner config: channel 2, country 44, input type 2
dshow debug: CaptureFilter::EnumPins
dshow debug: CaptureFilter::EnumPins
dshow debug: CaptureFilter::EnumPins
dshow debug: CaptureFilter::EnumPins
dshow debug: CapturePin::QueryPinInfo
dshow debug: CaptureFilter::EnumPins
dshow debug: CapturePin::QueryDirection
dshow debug: CapturePin::ConnectedTo [OK]
dshow debug: CaptureFilter::EnumPins
dshow debug: CaptureFilter::EnumPins
dshow debug: couldn't find tuner interface
dshow debug: Configuring Tuner Properties
dshow debug: CaptureFilter::EnumPins
dshow debug: CaptureFilter::EnumPins
dshow debug: CaptureFilter::EnumPins
dshow debug: CaptureFilter::EnumPins
dshow debug: CapturePin::QueryPinInfo
dshow debug: CaptureFilter::EnumPins
dshow debug: CapturePin::QueryDirection
dshow debug: CapturePin::ConnectedTo [OK]
dshow debug: CaptureFilter::EnumPins
dshow debug: CaptureFilter::EnumPins
dshow debug: MEDIATYPE_Video
dshow debug: selected video pin accepts format: I420
dshow debug: found device: VIA AC'97 Audio (WAVE)
dshow debug: using device: VIA AC'97 Audio (WAVE)
dshow debug: EnumDeviceCaps: output pin: Capture
dshow debug: EnumDeviceCaps: input pin: Stereo Mixer
dshow debug: EnumDeviceCaps: input pin: Mic
dshow debug: EnumDeviceCaps: input pin: Line In
dshow debug: EnumDeviceCaps: input pin: CD Player
dshow debug: EnumDeviceCaps: input pin: Video
dshow debug: EnumDeviceCaps: input pin: Aux
dshow debug: EnumDeviceCaps: trying pin Capture
dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:44100 bits/sample:16
dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:44100 bits/sample:16
dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:44100 bits/sample:16
dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:32000 bits/sample:16
dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:32000 bits/sample:16
dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:22050 bits/sample:16
dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:22050 bits/sample:16
dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:11025 bits/sample:16
dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:11025 bits/sample:16
dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:8000 bits/sample:16
dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:8000 bits/sample:16
dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:44100 bits/sample:8
dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:44100 bits/sample:8
dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:22050 bits/sample:8
dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:22050 bits/sample:8
dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:11025 bits/sample:8
dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:11025 bits/sample:8
dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:8000 bits/sample:8
dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:8000 bits/sample:8
dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:48000 bits/sample:16
dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:48000 bits/sample:16
dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:2, samples/sec:96000 bits/sample:16
dshow debug: EnumDeviceCaps: input pin accepts format: araw, channels:1, samples/sec:96000 bits/sample:16
dshow debug: CaptureFilter::JoinFilterGraph
dshow debug: connecting filters
dshow debug: CaptureFilter::EnumPins
dshow debug: CapturePin::QueryDirection
dshow debug: CapturePin::ConnectedTo [not connected]
dshow debug: CapturePin::QueryPinInfo
dshow debug: CaptureFilter::QueryFilterInfo
dshow debug: CapturePin::QueryPinInfo
dshow debug: CaptureFilter::EnumPins
dshow debug: CapturePin::QueryDirection
dshow debug: CapturePin::QueryDirection
dshow debug: CapturePin::QueryAccept [OK] (channels=2, samples/sec=44100, bits/samples=16, format=araw)
dshow debug: CapturePin::ReceiveConnection [OK]
dshow debug: CapturePin::NotifyAllocator
dshow debug: CapturePin::QueryAccept [OK] (channels=2, samples/sec=44100, bits/samples=16, format=araw)
dshow debug: filters connected successfully !
dshow debug: Configuring Device Properties
dshow debug: Showing WDM Audio Configuration Pages
dshow debug: CapturePin::QueryPinInfo
dshow debug: CaptureFilter::EnumPins
dshow debug: CapturePin::QueryDirection
dshow debug: CapturePin::ConnectedTo [OK]
dshow debug: tuner config: channel 2, country 44, input type 2
dshow debug: couldn't find tuner interface
dshow debug: Configuring Tuner Properties
dshow debug: MEDIATYPE_Audio
dshow debug: selected audio pin accepts format: araw
dshow debug: Playing...
dshow debug: CapturePin::QueryPinInfo
dshow debug: CaptureFilter::EnumPins
dshow debug: CapturePin::QueryDirection
dshow debug: CapturePin::QueryPinInfo
dshow debug: CaptureFilter::EnumPins
dshow debug: CapturePin::QueryDirection
dshow debug: CaptureFilter::EnumPins
dshow debug: CapturePin::QueryDirection
dshow debug: CaptureFilter::EnumPins
dshow debug: CapturePin::QueryDirection
dshow debug: CapturePin::QueryPinInfo
dshow debug: CaptureFilter::EnumPins
dshow debug: CapturePin::QueryDirection
dshow debug: CaptureFilter::EnumPins
dshow debug: CapturePin::QueryDirection
dshow debug: CapturePin::ConnectedTo [OK]
dshow debug: CaptureFilter::EnumPins
dshow debug: CapturePin::QueryDirection
dshow debug: CapturePin::ConnectedTo [OK]
dshow debug: CaptureFilter::SetSyncSource
dshow debug: CaptureFilter::SetSyncSource
dshow debug: CaptureFilter::Pause
dshow debug: CaptureFilter::Pause
dshow debug: CaptureFilter::Run
dshow debug: CaptureFilter::Run
main debug: using access_demux module "dshow"
main debug: `dshow://' successfully opened

Quovodis
Cone that earned his stripes
Cone that earned his stripes
Posts: 271
Joined: 16 Jun 2004 11:13
Location: Cork, Ireland

Postby Quovodis » 29 Apr 2005 10:57

From the debug, it looks the directshow plugin is working correctly except for the fact that it cannot configure any channel for viewing, which would explain why you are not seeing anything.

DVB-T uses a different configuration mechanism than with ordinary analog television.

When you turn on the property pages, do you see any pages relating to configuring video frequency, symbol rate, modulation ?

Guest

Postby Guest » 09 Jun 2005 21:03

No - nothing like that. I get things like:
- on the Video Decoder tab:
- Video Standard
- Signal Detected
- Lines Detected
- on the Video Proc Amp tab:
- Brightness
- Contrast
- etc
In fact, I think it looks unchanged from when I had the analogue TV card.....
Thoughts?

bXn
Blank Cone
Blank Cone
Posts: 46
Joined: 08 Jun 2005 09:14

Postby bXn » 09 Jun 2005 23:26

I am in the same position, now tabs to configure DVB-T specific
parameters.

polyphemus
Blank Cone
Blank Cone
Posts: 15
Joined: 22 Dec 2004 22:11
Location: UK

DVB-T under Windows

Postby polyphemus » 10 Jun 2005 00:34

Thanks - sorry - not quite sure what you mean:
(a) you had this problem in the past, but it is now giving you a different (ie DVB-T parameters) screen, or
(b) are you still having the problems I described above?

Polyphemus
Win XP Pro SP2
vlc-0.8.2-svn-20050605

Guest2

Same problem...

Postby Guest2 » 14 Jun 2005 11:52

I have the same problem with the Windows drivers for NOVA-T. The VLC recognise the card and the driver but you are not able to make any channel adjustment. I have tried the 0.8.2-test2 beta and it have som more controls but still no luck.

Anyone got i working ?

Please let us know.


Return to “General VLC media player Troubleshooting”

Who is online

Users browsing this forum: No registered users and 3 guests