Nightly Builds - Bugs and Fixes

Want to help the VideoLAN project? Designers, testers, translators, please come...
This is NOT about GETTING some help.
Forum rules
Please read the forum's rules carefully before posting. This forum should not be used to post VLC usage related questions.
Jean-Baptiste Kempf
Site Administrator
Site Administrator
Posts: 37523
Joined: 22 Jul 2005 15:29
VLC version: 4.0.0-git
Operating System: Linux, Windows, Mac
Location: Cone, France
Contact:

Re: Nightly Builds - Bugs and Fixes

Postby Jean-Baptiste Kempf » 31 Oct 2007 19:58

SPDIF audio problem


Hello All, been using various 0.9.0 nightlies up to around August time, using SPDIF output to my AV receiver, works perfectly for Dolby Digital 5.1 and DTS.
However, the nightlies from the past couple of weeks seem to have stopped working with SPDIF. When playing a DVD with Dolby Digital, although my amp still switches automatically to DD mode, there is just silence instead of audio. On DVDs with additional DTS soundtrack, I can select the second audio track in VLC, and the DTS output works.
After stopping and starting the track again, although VLC had defaulted back to audio track 1, the DTS was still being outputted, so I wonder if there is a problem with the audio track selection code rather than any SPDIF related stuff? I don't know, but hopefully someone will know what is wrong!

Thanks,
Ben
Can you give the exact date of change ?
Jean-Baptiste Kempf
http://www.jbkempf.com/ - http://www.jbkempf.com/blog/category/Videolan
VLC media player developer, VideoLAN President and Sites administrator
If you want an answer to your question, just be specific and precise. Don't use Private Messages.

Jean-Baptiste Kempf
Site Administrator
Site Administrator
Posts: 37523
Joined: 22 Jul 2005 15:29
VLC version: 4.0.0-git
Operating System: Linux, Windows, Mac
Location: Cone, France
Contact:

Re: Nightly Builds - Bugs and Fixes

Postby Jean-Baptiste Kempf » 31 Oct 2007 19:58

You mean the wxwidget interface? Open the preferences > all > Interface > Main > module > wxWidget Interface. It's not a skin.

EDIT: Oh j-b was faster :D
No I mean that Nightly looks Different from the original VLC
I was wondering if it was possible to get Nightly to look the same as the original but still have all the functions.
If I can do this in wxWidget I have no clue how to.
Thank You everyone for your fast response :D
vlc.exe -Iwxwidgets.
Jean-Baptiste Kempf
http://www.jbkempf.com/ - http://www.jbkempf.com/blog/category/Videolan
VLC media player developer, VideoLAN President and Sites administrator
If you want an answer to your question, just be specific and precise. Don't use Private Messages.

flyingpengwin
New Cone
New Cone
Posts: 8
Joined: 18 Oct 2007 07:35

Re: Nightly Builds - Bugs and Fixes

Postby flyingpengwin » 31 Oct 2007 20:58

You mean the wxwidget interface? Open the preferences > all > Interface > Main > module > wxWidget Interface. It's not a skin.

EDIT: Oh j-b was faster :D
No I mean that Nightly looks Different from the original VLC
I was wondering if it was possible to get Nightly to look the same as the original but still have all the functions.
If I can do this in wxWidget I have no clue how to.
Thank You everyone for your fast response :D
vlc.exe -Iwxwidgets.
Thank You Very Much
Is there anyway to set hotkeys to the hide and show interface?
I've tried several times and VLC either errors or just doesn't work when i press the button i assigned.

Jean-Baptiste Kempf
Site Administrator
Site Administrator
Posts: 37523
Joined: 22 Jul 2005 15:29
VLC version: 4.0.0-git
Operating System: Linux, Windows, Mac
Location: Cone, France
Contact:

Re: Nightly Builds - Bugs and Fixes

Postby Jean-Baptiste Kempf » 31 Oct 2007 21:07

No. It is Not Possible.
Jean-Baptiste Kempf
http://www.jbkempf.com/ - http://www.jbkempf.com/blog/category/Videolan
VLC media player developer, VideoLAN President and Sites administrator
If you want an answer to your question, just be specific and precise. Don't use Private Messages.

arwa
New Cone
New Cone
Posts: 9
Joined: 14 Jul 2007 04:16

Re: Nightly Builds - Bugs and Fixes

Postby arwa » 31 Oct 2007 23:10

its now working without error message and save preference

benwillcox
New Cone
New Cone
Posts: 9
Joined: 30 Oct 2007 22:14

Re: Nightly Builds - Bugs and Fixes

Postby benwillcox » 31 Oct 2007 23:20

SPDIF audio problem
Can you give the exact date of change ?
Yes :D I have just downloaded several versions and tested them. The last working version is vlc-0.9.0-svn-20070922-0001, the problem then appears in vlc-0.9.0-svn-20070923-0000 onwards.

Thanks,
Ben

Jean-Baptiste Kempf
Site Administrator
Site Administrator
Posts: 37523
Joined: 22 Jul 2005 15:29
VLC version: 4.0.0-git
Operating System: Linux, Windows, Mac
Location: Cone, France
Contact:

Re: Nightly Builds - Bugs and Fixes

Postby Jean-Baptiste Kempf » 01 Nov 2007 01:16

Can you trac it ? or mail it to vlc-devel ? or both ?
Jean-Baptiste Kempf
http://www.jbkempf.com/ - http://www.jbkempf.com/blog/category/Videolan
VLC media player developer, VideoLAN President and Sites administrator
If you want an answer to your question, just be specific and precise. Don't use Private Messages.

jack5904
New Cone
New Cone
Posts: 4
Joined: 31 Oct 2007 14:37

Re: Nightly Builds - Bugs and Fixes

Postby jack5904 » 01 Nov 2007 10:00

Streaming / Transcode bug is present in vlc-0.9.0-svn-20071101-0000-win32, this problem is present from the first SVN :!: :!: :!:
main debug: starting new item
main debug: processing request item Streaming node Liste de lecture skip 0
main debug: resyncing on Streaming
main debug: Streaming is at 1
main debug: creating new input thread
main debug: waiting for thread completion
main debug: thread 3408 (input) created at priority 1 (input/input.c:333)
main debug: stream=`transcode'
main debug: looking for sout stream module: 1 candidate
main debug: stream=`duplicate'
main debug: looking for sout stream module: 1 candidate
stream_out_duplicate debug: creating 'duplicate'
stream_out_duplicate debug: * adding `std{access=file,dst=g:/video/mpeg2.mpg}'
main debug: stream=`std'
main debug: looking for sout stream module: 1 candidate
main debug: set config option: sout-standard-access to file
main debug: set config option: sout-standard-dst to g:/video/mpeg2.mpg
stream_out_standard debug: creating `file/(null)://g:/video/mpeg2.mpg'
stream_out_standard debug: extension is mpg
stream_out_standard debug: extension -> mux=ps
stream_out_standard debug: using `file/ps://g:/video/mpeg2.mpg'
main debug: looking for sout access module: 1 candidate
access_output_file debug: file access output opened (`g:/video/mpeg2.mpg')
main debug: using sout access module "access_output_file"
stream_out_standard debug: access opened
main debug: looking for sout mux module: 1 candidate
mux_ps info: Open
main debug: using sout mux module "mux_ps"
main debug: muxer support adding stream at any time
main debug: muxer prefers to wait for all ES before starting to mux
stream_out_standard debug: mux opened
main debug: using sout stream module "stream_out_standard"
main debug: using sout stream module "stream_out_duplicate"
main debug: set config option: sout-transcode-vcodec to mp1v
main debug: set config option: sout-transcode-vb to 800
main debug: set config option: sout-transcode-scale to 0
main debug: set config option: sout-transcode-acodec to mpga
main debug: set config option: sout-transcode-ab to 128
main debug: set config option: sout-transcode-channels to 2
stream_out_transcode debug: codec audio=mpga 0Hz 2 channels 128Kb/s
stream_out_transcode debug: codec video=mp1v 0x0 scaling: 0,000000 800kb/s
main debug: using sout stream module "stream_out_transcode"
main debug: `"G:/video/h264-paff.mpg" ' gives access `' demux `' path `"G:/video/h264-paff.mpg" '
main debug: creating demux: access='' demux='' path='"G:/video/h264-paff.mpg" '
main debug: looking for access_demux module: 1 candidate
dvdnav warning: cannot open dvdnav
main debug: creating access '' path='"G:/video/h264-paff.mpg" '
main debug: looking for access2 module: 5 candidates
vcd debug: trying .cue file: "G:/video/h264-paff.cue
vcd debug: could not find .cue file
access_directory debug: opening directory `"G:/video/h264-paff.mpg" '
access_directory error: "G:/video/h264-paff.mpg" : Unknown network stack error
access_file debug: opening file `"G:/video/h264-paff.mpg" '
access_file error: cannot open file "G:/video/h264-paff.mpg" (Unknown network stack error)
cdda debug: trying .cue file: "G:/video/h264-paff.cue
cdda debug: could not find .cue file
cdda warning: could not open "G:/video/h264-paff.mpg"
main debug: retrying with access `' demux `' path `"G:/video/h264-paff.mpg" '
main debug: creating access '' path='"G:/video/h264-paff.mpg" '
main debug: looking for access2 module: 5 candidates
vcd debug: trying .cue file: "G:/video/h264-paff.cue
vcd debug: could not find .cue file
access_directory debug: opening directory `"G:/video/h264-paff.mpg" '
access_directory error: "G:/video/h264-paff.mpg" : Unknown network stack error
access_file debug: opening file `"G:/video/h264-paff.mpg" '
access_file error: cannot open file "G:/video/h264-paff.mpg" (Unknown network stack error)
cdda debug: trying .cue file: "G:/video/h264-paff.cue
cdda debug: could not find .cue file
cdda warning: could not open "G:/video/h264-paff.mpg"
main error: open of `"G:/video/h264-paff.mpg" ' failed: could not create access: no suitable access2 module
main debug: destroying chain... (name=transcode)
main debug: destroying chain... (name=duplicate)
stream_out_duplicate debug: closing a duplication
main debug: destroying chain... (name=std)
mux_ps info: Close
main debug: removing module "mux_ps"
access_output_file debug: file access output closed
main debug: removing module "access_output_file"
main debug: removing module "stream_out_standard"
main debug: destroying chain done
main debug: removing module "stream_out_duplicate"
main debug: destroying chain done
main debug: removing module "stream_out_transcode"
main debug: destroying chain done
main debug: finished input
main debug: dying input
main debug: dying input
main debug: dying input
main debug: dying input
main debug: dead input
main debug: thread 3408 joined (input/input.c:470)
main debug: thread times: real 0m0,107000s, kernel 0m0,000000s, user 0m0,000000s
main debug: starting new item
main debug: changing item without a request (current 1/2)
main debug: nothing to play
This version is playing PAFF INTERLACED correctly but can't streaming or transcode, good regression

Open File display files horizontaly only

CloudStalker
Big Cone-huna
Big Cone-huna
Posts: 2581
Joined: 14 Jan 2007 19:00
VLC version: OVER 9000!!!
Operating System: It's...blue screen
Location: Heaven? No no. What's that other place that starts with an "H"? Oh yes: Home. ^_^

Re: Nightly Builds - Bugs and Fixes

Postby CloudStalker » 01 Nov 2007 18:37

SPDIF audio problem
Can you give the exact date of change ?
Yes :D I have just downloaded several versions and tested them. The last working version is vlc-0.9.0-svn-20070922-0001, the problem then appears in vlc-0.9.0-svn-20070923-0000 onwards.

Thanks,
Ben
I'll confirm that this is true, all builds after the 22end of October give me an "Assertion" error and then crash. I'll post a ticket if there is already one.

benwillcox
New Cone
New Cone
Posts: 9
Joined: 30 Oct 2007 22:14

Re: Nightly Builds - Bugs and Fixes

Postby benwillcox » 01 Nov 2007 20:53

I'll confirm that this is true, all builds after the 22end of October give me an "Assertion" error and then crash. I'll post a ticket if there is already one.
This is a different problem. I also get that same error on very recent builds, however the SPDIF issue I refer to appeared on 23rd September, not 23rd October!

Thanks,
Ben.

benwillcox
New Cone
New Cone
Posts: 9
Joined: 30 Oct 2007 22:14

Re: Nightly Builds - Bugs and Fixes

Postby benwillcox » 01 Nov 2007 20:53

Can you trac it ? or mail it to vlc-devel ? or both ?
Thanks, I will do this, and report back if/when the problem is resolved.

Cheers,
Ben

jack5904
New Cone
New Cone
Posts: 4
Joined: 31 Oct 2007 14:37

Re: Nightly Builds - Bugs and Fixes

Postby jack5904 » 01 Nov 2007 23:42

The only version which can play DVB-T stream, can't transcode ohhh yeah

jack5904
New Cone
New Cone
Posts: 4
Joined: 31 Oct 2007 14:37

Re: Nightly Builds - Bugs and Fixes

Postby jack5904 » 03 Nov 2007 15:46

1-the streaming not working
2-when i try to change any value number inside the preferences or in the stream its not working .. cant type or use the kyebourd
so i have to use page up or down

3-i don't know how to describe but the windows repeat it self
media -> network or streaming -> play .. the video start then open windows come up again
media -> streaming -> select source like udp -> stream -> change video , audio codec -> stream
nothing happened then the stream output windows come again and again until i close vlc

==
the error when exit fixed
cant save language in preferences
The quit error is fixed. Cool to have confirmation. :D
Language in simple prefrences or in complete ones ?
1. Explain
2. Explain.
3. yes, known unfinished part.
Streaming in vlc-0.9.0-svn-20071103-0000-win32 ??? Totally absent

arwa
New Cone
New Cone
Posts: 9
Joined: 14 Jul 2007 04:16

Re: Nightly Builds - Bugs and Fixes

Postby arwa » 04 Nov 2007 02:24


Streaming in vlc-0.9.0-svn-20071103-0000-win32 ??? Totally absent
i think streaming and transcoding is a major part and need more time coz they want to improve it especially with wmv/asf
i don't expect it soon

smilingdog
Blank Cone
Blank Cone
Posts: 12
Joined: 15 Sep 2007 18:15

Re: Nightly Builds - Bugs and Fixes

Postby smilingdog » 05 Dec 2007 09:38

Latest windows build - on XP when attempting to open a WMV file ther is an error box that displays endless "File reading failed\nVLC could not read the file" The box cannot be closed. Have to use the task manager to kill it.

CloudStalker
Big Cone-huna
Big Cone-huna
Posts: 2581
Joined: 14 Jan 2007 19:00
VLC version: OVER 9000!!!
Operating System: It's...blue screen
Location: Heaven? No no. What's that other place that starts with an "H"? Oh yes: Home. ^_^

Re: Nightly Builds - Bugs and Fixes

Postby CloudStalker » 05 Dec 2007 10:47

I would also like to report another error. When I try to play any .avi file a window always appears saying: 'the avi file is broken' and it gives me the options to repair, don't repair, cancel. I know that there's nothing wrong with these files and I've even installed a previous version of VLC (0.8.6d) to test this and they play without any trouble there, it's just in the more recent nightly builds.

Ferahgo
Blank Cone
Blank Cone
Posts: 11
Joined: 02 Dec 2007 14:07

Re: Nightly Builds - Bugs and Fixes

Postby Ferahgo » 06 Dec 2007 17:49

Confirm that here too.
I wanted to add that if you proceed with repairing, nothing will happen. I.e. progressbar doesn't move on. Then, in backgorund, it plays for some seconds, 11 or so, and then says it cannot read the file. Same happens if you simply check not to repair the file.

CloudStalker
Big Cone-huna
Big Cone-huna
Posts: 2581
Joined: 14 Jan 2007 19:00
VLC version: OVER 9000!!!
Operating System: It's...blue screen
Location: Heaven? No no. What's that other place that starts with an "H"? Oh yes: Home. ^_^

Re: Nightly Builds - Bugs and Fixes

Postby CloudStalker » 08 Dec 2007 15:35

:shock: Sorry about that, here's another problem: when listening to a WAVE file using the latest nightly builds everything seems to play through fine, that is until you try seeking to another position and then there's this really loud distortion that will continue for the remainder of the file. I suggest turning down your listening device before testing this one. :shock: :cry:

mattyb89
New Cone
New Cone
Posts: 1
Joined: 15 Dec 2007 01:43

Re: Nightly Builds - Bugs and Fixes

Postby mattyb89 » 15 Dec 2007 01:46

I would also like to confirm the "this avi file is broken" bug. I'm using the latest trunk build 20071215-0001 and the same problems are occurring as stated above, thankyou for your time.

jacoby
Blank Cone
Blank Cone
Posts: 17
Joined: 29 Apr 2004 21:34
Contact:

Re: Nightly Builds - Bugs and Fixes

Postby jacoby » 16 Dec 2007 11:09

Confirm that here too.
I wanted to add that if you proceed with repairing, nothing will happen. I.e. progressbar doesn't move on. Then, in backgorund, it plays for some seconds, 11 or so, and then says it cannot read the file. Same happens if you simply check not to repair the file.
I've been using the nightlies for a while now, but about a week ago started seeing this problem, so I switched back to the release build for a while, switched back tonight and still seeing that issue. Different videos will run different lengths, though all about 8-15 seconds. It will run to the same point each time, so it doesn't seem to be totally random.

I assume this error is pretty reproduceable, but I'll throw out a log dump anyway, just in case: (build 20071216-0926)
this is everything from right after it decided which filter to use, and I did no seeking on my own.
this file plays with no problems in .8.6d

Code: Select all

ffmpeg warning: I cbpy damaged at 24 13 (mpeg4@00B7C8C0) ffmpeg warning: Error at MB: 544 (mpeg4@00B7C8C0) ffmpeg warning: illegal mb_num in video packet (1023 858) (mpeg4@00B7C8C0) ffmpeg warning: illegal mb_num in video packet (1023 858) (mpeg4@00B7C8C0) ffmpeg warning: Error at MB: 322 (mpeg4@00B7C8C0) ffmpeg warning: marker does not match f_code (mpeg4@00B7C8C0) ffmpeg warning: marker does not match f_code (mpeg4@00B7C8C0) ffmpeg warning: marker does not match f_code (mpeg4@00B7C8C0) ffmpeg warning: illegal mb_num in video packet (1023 858) (mpeg4@00B7C8C0) ffmpeg warning: marker does not match f_code (mpeg4@00B7C8C0) ffmpeg warning: marker does not match f_code (mpeg4@00B7C8C0) ffmpeg warning: marker does not match f_code (mpeg4@00B7C8C0) ffmpeg warning: marker does not match f_code (mpeg4@00B7C8C0) ffmpeg warning: illegal mb_num in video packet (1023 858) (mpeg4@00B7C8C0) ffmpeg warning: I cbpy damaged at 16 13 (mpeg4@00B7C8C0) ffmpeg warning: Error at MB: 536 (mpeg4@00B7C8C0) ffmpeg warning: illegal mb_num in video packet (1023 858) (mpeg4@00B7C8C0) ffmpeg warning: marker does not match f_code (mpeg4@00B7C8C0) ffmpeg warning: Error at MB: 227 (mpeg4@00B7C8C0) ffmpeg warning: marker does not match f_code (mpeg4@00B7C8C0) ffmpeg warning: marker does not match f_code (mpeg4@00B7C8C0) ffmpeg warning: marker does not match f_code (mpeg4@00B7C8C0) ffmpeg debug: concealing 858 DC, 858 AC, 858 MV errors (mpeg4@00B7C8C0) access_file error: seeking too early access_file error: seeking too early access_file error: seeking too early access_file error: read failed (Unknown network stack error) access_file error: read failed (Unknown network stack error) access_file error: read failed (Unknown network stack error) access_file error: read failed (Unknown network stack error) access_file error: read failed (Unknown network stack error) access_file error: read failed (Unknown network stack error) access_file error: read failed (Unknown network stack error) access_file error: read failed (Unknown network stack error) access_file error: read failed (Unknown network stack error) access_file error: read failed (Unknown network stack error) access_file error: read failed (Unknown network stack error) access_file error: read failed (Unknown network stack error) access_file error: read failed (Unknown network stack error) access_file error: read failed (Unknown network stack error) access_file error: read failed (Unknown network stack error) access_file error: read failed (Unknown network stack error) access_file error: read failed (Unknown network stack error) access_file error: read failed (Unknown network stack error) access_file error: read failed (Unknown network stack error) access_file error: read failed (Unknown network stack error)

Ferahgo
Blank Cone
Blank Cone
Posts: 11
Joined: 02 Dec 2007 14:07

Re: Nightly Builds - Bugs and Fixes

Postby Ferahgo » 16 Dec 2007 19:29

Are you on Windows?
You may then use 20071125-0001 if you want. Last build that works for me.

Aethereal
New Cone
New Cone
Posts: 2
Joined: 19 Dec 2007 13:46

Re: Nightly Builds - Bugs and Fixes

Postby Aethereal » 19 Dec 2007 14:00

Hi
I'm testing VLC nightly build for Windows, and since you moved to the new QT4 interface I noticed a strange behavior in the open file dialog.
Assume you have a very populated directory tree: you scroll down until you find the directory you want to enter, and double-click. Then, you are NOT at the first entry/file of the chosen directory, regardless of the sorting, but at the Nth (i.e., as you already scrolled down upon entering the directory).
Looks like, entering the new directory, the pointer to the first shown item in the list were not reset but kept to the previous value.
It is a constant issue in the last month or so, I was unable to check on today's build because this one crash directly upon launch :p

Jean-Baptiste Kempf
Site Administrator
Site Administrator
Posts: 37523
Joined: 22 Jul 2005 15:29
VLC version: 4.0.0-git
Operating System: Linux, Windows, Mac
Location: Cone, France
Contact:

Re: Nightly Builds - Bugs and Fixes

Postby Jean-Baptiste Kempf » 19 Dec 2007 19:02

WHen did you try it ?
Jean-Baptiste Kempf
http://www.jbkempf.com/ - http://www.jbkempf.com/blog/category/Videolan
VLC media player developer, VideoLAN President and Sites administrator
If you want an answer to your question, just be specific and precise. Don't use Private Messages.

Aethereal
New Cone
New Cone
Posts: 2
Joined: 19 Dec 2007 13:46

Re: Nightly Builds - Bugs and Fixes

Postby Aethereal » 20 Dec 2007 09:48

Windows version 20071220-0000 does not crash as 20071218-0000 did, so I checked again.
The problem is still there, and it is evident if you select the "Detail View" (and you have a very populated filesystem tree)
Actually it looks like some randomness was added... I tried reproducing the problem, and sometimes the behavior look correct (but awfully slow in populating the dirs, probably due to the high amount of files). Most of the times the error was present, and happens both selecting a folder or using the "up one dir" and "back" buttons (actually, more using these, probably because then the dir content was cached while loading it from the beginning reset the pointer?)
Additionally, most AVIs are still reported as broken but at least are playable, while an huge amount of wmv give an "VLC coud not read the file" error. I can't tell if there's a difference in the codec used because the codec infromation window (Ctrl-J) seems not to be implemented yet.
As an additional note, I can't change the interface language, it keeps being on "Auto" (I tried to switch to English in order to write the right menu names)
Also, if a movie reach the end in full-screen mode, it automatically reverts to the desktop and the VLC main window is not available, I have to use the bottom right cone taskbar icon to display it again. Is that the desired behavior?

CloudStalker
Big Cone-huna
Big Cone-huna
Posts: 2581
Joined: 14 Jan 2007 19:00
VLC version: OVER 9000!!!
Operating System: It's...blue screen
Location: Heaven? No no. What's that other place that starts with an "H"? Oh yes: Home. ^_^

Re: Nightly Builds - Bugs and Fixes

Postby CloudStalker » 20 Dec 2007 10:22

Assertion errors persist. :( It still crashes when loading multiple items; I'm forced to always revert back to the November 22 Nightly build.


Return to “Contribute and help the VideoLAN project”

Who is online

Users browsing this forum: No registered users and 4 guests