The VideoLAN Forums

udp playing not work in 1.1.0 -win32

in 1.0.5 work fine

More details, please.

i try to plaing vlc translated stream on 2 PC
1 on windows XP sp3
2 windows 7 or vista i dont know
if i downgrade to 1.0.5 version all work fine

Some URL you could share?

udp://224.1.1.1:1234

That isn't in public internet. Could you open Tools -> Messages (set Verbosity to 2) before you start playback and paste messages here or to pastebin?

in linux mandriva 2010 and vlc 1.1.0

main debug: processing request item udp://224.1.1.1:1234 node Плейлист skip 0
main debug: resyncing on udp://224.1.1.1:1234
main debug: udp://224.1.1.1:1234 is at 56
main debug: starting new item
main debug: creating new input thread
main debug: Creating an input for 'udp://224.1.1.1:1234'
main debug: thread started
main debug: using timeshift granularity of 50 MiB
main debug: using timeshift path '/tmp'
main debug: thread (input) created at priority 10 (input/input.c:214)
main debug: `udp://224.1.1.1:1234' gives access `udp' demux `' path `224.1.1.1:1234'
main debug: creating demux: access='udp' demux='' path='224.1.1.1:1234'
main debug: looking for access_demux module: 0 candidates
main debug: no access_demux module matched "udp"
main debug: TIMER module_need() : 0.303 ms - Total 0.303 ms / 1 intvls (Avg 0.303 ms)
main debug: creating access 'udp' path='224.1.1.1:1234'
main debug: looking for access module: 1 candidate
access_udp debug: opening server=224.1.1.1:1234 local=:1234
main debug: net: connecting to [224.1.1.1]:1234 from []:1234
main debug: TIMER input launching for 'udp://224.1.1.1:1234' : 14182.647 ms - Total 14182.647 ms / 1 intvls (Avg 14182.646 ms)
qt4 debug: IM: Setting an input
main debug: using access module "access_udp"
main debug: TIMER module_need() : 29.938 ms - Total 29.938 ms / 1 intvls (Avg 29.938 ms)
main debug: Using AStream*Block
main debug: pre buffering

thats all
no sound and no picture
in windows i have only 1.0.5

in windows

main debug: processing request item udp://224.1.1.1:1234 node Плейлист skip 0
main debug: resyncing on udp://224.1.1.1:1234
main debug: udp://224.1.1.1:1234 is at 1
main debug: starting new item
main debug: creating new input thread
main debug: Creating an input for 'udp://224.1.1.1:1234'
main debug: thread (input) created at priority 1 (../.././src/input/input.c:214)
main debug: thread started
main debug: using timeshift granularity of 50 MiB
main debug: using timeshift path 'D:\DOCUME~1\admin4eg\LOCALS~1\Temp'
main debug: `udp://224.1.1.1:1234' gives access `udp' demux `' path `224.1.1.1:1234'
main debug: creating demux: access='udp' demux='' path='224.1.1.1:1234'
main debug: looking for access_demux module: 0 candidates
main debug: no access_demux module matched "udp"
main debug: TIMER module_need() : 1.000 ms - Total 1.000 ms / 1 intvls (Avg 1.000 ms)
main debug: creating access 'udp' path='224.1.1.1:1234'
main debug: looking for access module: 1 candidate
access_udp debug: opening server=224.1.1.1:1234 local=:1234
main debug: net: connecting to [224.1.1.1]:1234 from []:1234
main debug: using access module "access_udp"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: Using AStream*Block
main debug: pre buffering
qt4 debug: IM: Setting an input

in windows 1.0.5

main debug: processing request item udp://224.1.1.1:1234 node Плейлист skip 0
main debug: resyncing on udp://224.1.1.1:1234
main debug: udp://224.1.1.1:1234 is at 0
main debug: starting new item
main debug: creating new input thread
main debug: Creating an input for 'udp://224.1.1.1:1234'
main debug: thread (input) created at priority 1 (../.././src/input/input.c:230)
qt4 debug: IM: Setting an input
main debug: thread started
main debug: using timeshift granularity of 50 MBytes
main debug: using timeshift path 'D:\DOCUME~1\admin4eg\LOCALS~1\Temp'
main debug: `udp://@224.1.1.1:1234' gives access `udp' demux `' path `@224.1.1.1:1234'
main debug: creating demux: access='udp' demux='' path='@224.1.1.1:1234'
qt4 debug: Updating the geometry
qt4 debug: Updating the geometry
main debug: looking for access_demux module: 0 candidates
main debug: no access_demux module matched "udp"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: creating access 'udp' path='@224.1.1.1:1234'
main debug: looking for access module: 1 candidate
access_udp debug: opening server=:0 local=224.1.1.1:1234
main debug: net: opening 224.1.1.1 datagram port 1234
main debug: Multicast group join request
main debug: IP_ADD_MEMBERSHIP multicast request
main debug: using access module "access_udp"
main debug: TIMER module_need() : 9.000 ms - Total 9.000 ms / 1 intvls (Avg 9.000 ms)
main debug: Using AStream*Block
main debug: pre buffering
main debug: received first data after 378 ms
main debug: prebuffering done 1316 bytes in 0s - 3 kbytes/s
main debug: looking for stream_filter module: 2 candidates
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: looking for stream_filter module: 1 candidate
main debug: using stream_filter module "stream_filter_record"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: creating demux: access='udp' demux='' path='@224.1.1.1:1234'
main debug: looking for demux module: 50 candidates
main debug: using demux module "ts"
main debug: TIMER module_need() : 22.000 ms - Total 22.000 ms / 1 intvls (Avg 22.000 ms)
main debug: looking for a subtitle file in D:\Program Files\VideoLAN\VLC\
ts debug: DEMUX_SET_GROUP 0 00000000
access_udp warning: unimplemented query in control
main debug: `udp://@224.1.1.1:1234' successfully opened
ts debug: pid[69] unknown
ts debug: pid[68] unknown
ts debug: PATCallBack called
ts debug: new PAT ts_id=35329 version=19 current_next=1
ts debug: * number=1 pid=66
ts debug: PMTCallBack called
ts debug: new PMT program number=1 version=21 pid_pcr=69
ts debug: * es pid=68 type=3 dr->i_tag=0xa
ts debug: found language: eng
ts debug: * es pid=68 type=3 fcc=mpga
main debug: selecting program id=1
main debug: looking for decoder module: 35 candidates
main debug: using decoder module "mpeg_audio"
main debug: TIMER module_need() : 1.000 ms - Total 1.000 ms / 1 intvls (Avg 1.000 ms)
main debug: thread (decoder) created at priority 2 (../.././src/input/decoder.c:315)
main debug: thread started
ts debug: * es pid=69 type=2 fcc=mpgv
qt4 debug: Updating the geometry
qt4 debug: Updating the geometry
main debug: looking for decoder module: 35 candidates
qt4 debug: Updating the geometry
qt4 debug: Updating the geometry
main debug: using decoder module "libmpeg2"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: thread (decoder) created at priority 0 (../.././src/input/decoder.c:315)
main debug: thread started
ts warning: first packet for pid=69 cc=0x6
ts warning: first packet for pid=68 cc=0x7
qt4 debug: Updating the geometry
qt4 debug: Updating the geometry
qt4 debug: Updating the geometry
qt4 debug: Updating the geometry
main debug: Buffering 0%
mpeg_audio debug: MPGA channels:2 samplerate:48000 bitrate:192
main debug: reusing aout
main debug: looking for audio output module: 3 candidates
aout_directx debug: OpenAudio
aout_directx debug: found device: ��������� �������� �������
aout_directx debug: found device: Emu10Kx Audio [BC00]
aout_directx debug: found device: C-Media USB Headphone Set
qt4 debug: Updating the geometry
qt4 debug: Updating the geometry
aout_directx debug: device supports 2 channels (DEFAULT!)
aout_directx debug: device supports 1 channel
aout_directx debug: Windows says your SpeakerConfig is stereo
aout_directx debug: creating DirectSoundThread
main debug: thread started
aout_directx debug: DirectSoundThread ready
main debug: thread (DirectSound Notification Thread) created at priority 15 (../../.././modules/audio_output/directx.c:427)
main debug: using audio output module "aout_directx"
main debug: TIMER module_need() : 17.000 ms - Total 17.000 ms / 1 intvls (Avg 17.000 ms)
main debug: output 's16l' 48000 Hz Stereo frame=1 samples/4 bytes
main debug: mixer 'fl32' 48000 Hz Stereo frame=1 samples/8 bytes
main debug: filter(s) 'fl32'->'s16l' 48000 Hz->48000 Hz Stereo->Stereo
main debug: looking for audio filter module: 24 candidates
main debug: using audio filter module "converter_float"
main debug: TIMER module_need() : 1.000 ms - Total 1.000 ms / 1 intvls (Avg 1.000 ms)
main debug: found a filter for the whole conversion
main debug: looking for audio mixer module: 3 candidates
main debug: using audio mixer module "float32_mixer"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: input 'mpga' 48000 Hz Stereo frame=1152 samples/1161 bytes
main debug: looking for audio filter module: 1 candidate
scaletempo warning: bad input or output format
main warning: no audio filter module matching "scaletempo" could be loaded
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: looking for audio filter module: 1 candidate
scaletempo debug: format: 48000 rate, 2 nch, 4 bps, fl32
scaletempo debug: params: 30 stride, 0.200 overlap, 14 search
scaletempo debug: 1.000 scale, 1440.000 stride_in, 1440 stride_out, 1152 standing, 288 overlap, 672 search, 2400 queue, fl32 mode
main debug: using audio filter module "scaletempo"
main debug: TIMER module_need() : 1.000 ms - Total 1.000 ms / 1 intvls (Avg 1.000 ms)
main debug: filter(s) 'mpga'->'fl32' 48000 Hz->48000 Hz Stereo->Stereo
main debug: looking for audio filter module: 24 candidates
main debug: using audio filter module "mpgatofixed32"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: found a filter for the whole conversion
main debug: filter(s) 'fl32'->'fl32' 52800 Hz->48000 Hz Stereo->Stereo
main debug: looking for audio filter module: 24 candidates
main debug: using audio filter module "bandlimited_resampler"
main debug: TIMER module_need() : 1.000 ms - Total 1.000 ms / 1 intvls (Avg 1.000 ms)
main debug: found a filter for the whole conversion
main debug: End of audio preroll
main debug: Buffering 23%
libmpeg2 debug: 704x576 (display 704,576), aspect 576000, sar 12:11, 25.000 fps
main debug: no usable vout present, spawning one
main debug: looking for text renderer module: 2 candidates
main debug: thread (fontlist builder) created at priority 0 (../../.././modules/misc/freetype.c:480)
freetype debug: using fontsize: 2
main debug: using text renderer module "freetype"
main debug: TIMER module_need() : 2.000 ms - Total 2.000 ms / 1 intvls (Avg 2.000 ms)
main debug: looking for video filter2 module: 20 candidates
swscale debug: 32x32 chroma: YUVA -> 16x16 chroma: YUVA with scaling using Bicubic (good quality)
main debug: using video filter2 module "swscale"
main debug: TIMER module_need() : 2.000 ms - Total 2.000 ms / 1 intvls (Avg 2.000 ms)
main debug: looking for video filter2 module: 20 candidates
yuvp debug: YUVP to YUVA converter
main debug: using video filter2 module "yuvp"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: window size: 768x576
main debug: looking for video output module: 7 candidates
vout_directx debug: creating DirectXEventThread
main debug: thread (Vout Events Thread) created at priority 0 (../../../.././modules/video_output/msw/directx.c:282)
main debug: thread started
vout_directx debug: DirectXCreateWindow
main debug: looking for hwnd module: 3 candidates
qt4 debug: requesting video...
main debug: thread started
freetype debug: Building font database...
freetype debug: Finished building font database.
freetype debug: Took 0 microseconds
main debug: thread ended
main debug: Buffering 47%
main debug: Buffering 70%
qt4 debug: Video was requested -1, -1
qt4 debug: Video is resizing to: 768 576
qt4 debug: Updating the geometry
main debug: using hwnd module "qt4"
main debug: TIMER module_need() : 176.000 ms - Total 176.000 ms / 1 intvls (Avg 176.000 ms)
vout_directx debug: created video sub-window
vout_directx debug: Vout EventThread running
vout_directx debug: DirectXInitDDraw
vout_directx debug: directx-device:
vout_directx debug: DirectXEnumCallback: ��������� ������������, display
vout_directx debug: screen dimensions (0x0,1280x1024)
vout_directx debug: DirectDraw Capabilities: overlay=1 yuvoverlay=1 can_deinterlace_overlay=1 colorkey=1 stretch=1 bltfourcc=1
vout_directx debug: align_boundary_src=0,0 align_boundary_dest=1,1 align_size_src=0,0 align_size_dest=0,0
vout_directx debug: End DirectXInitDDraw
vout_directx debug: DirectXCreateDisplay
main debug: Buffering 93%
vout_directx debug: DirectXCreateClipper
vout_directx debug: disabling screen saver
main debug: using video output module "vout_directx"
main debug: TIMER module_need() : 247.000 ms - Total 247.000 ms / 1 intvls (Avg 247.000 ms)
main debug: Deinterlacing available
vout_directx debug: NewPictureVec overlay:yes chroma:YV12
main debug: Stream buffering done (352 ms in 354 ms)
vout_directx debug: YUV overlay created successfully
vout_directx debug: End NewPictureVec (succeeded)
main debug: got 1 direct buffer(s)
main debug: pic render sz 704x576, of (0,0), vsz 704x576, 4cc I420, ar 4:3, sar 12:11, msk r0x0 g0x0 b0x0
main debug: pic in sz 704x576, of (0,0), vsz 704x576, 4cc I420, ar 4:3, sar 12:11, msk r0x0 g0x0 b0x0
main debug: pic out sz 704x576, of (0,0), vsz 704x576, 4cc I420, ar 4:3, sar 12:11, msk r0x0 g0x0 b0x0
main debug: direct render, mapping render pictures 0-14 to system pictures 1-15
main warning: dts != current_pts (-36129083187)
main warning: decoder synchro warning: pts != current_date (-40000)
main debug: End of video preroll
main debug: Received first picture
main debug: Decoder buffering done in 42 ms
qt4 debug: Qt: Entering Fullscreen
main warning: buffer is 106299 late, triggering upsampling
freetype debug: using fontsize: 36
main debug: looking for video blending module: 1 candidate
blend debug: chroma: YUVA -> I420
main debug: using video blending module "blend"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: decoded 106/108 pictures

aaaaaaaaaa
i find problem
udp://224.1.1.1:1234 - cant work
udp://@224.1.1.1:1234 - WORK!!!!