The VideoLAN Forums

Hi guys,

Since 0.8.6 version I can't play multicast streams anymore. My OS is Vista x64 and I have dual network card config, the iptv one placed on top in adapters and bindings config.
Note: bottom half of the output is writter after I press STOP button.
Any ideas?

Thanks

Here is the message window output:
main debug: processing request item udp://239.255.0.1:1234 node Playlist skip 0
main debug: resyncing on udp://239.255.0.1:1234
main debug: udp://239.255.0.1:1234 is at 0
main debug: starting new item
main debug: creating new input thread
main debug: Creating an input for 'udp://239.255.0.1:1234'
main debug: thread (input) created at priority 1 (../.././src/input/input.c:230)
qt4 debug: IM: Setting an input
main debug: thread started
main debug: using timeshift granularity of 50 MBytes
main debug: using timeshift path '[ROOT PATH]\AppData\Local\Temp'
main debug: `udp://@239.255.0.1:1234' gives access `udp' demux `' path `@239.255.0.1:1234'
main debug: creating demux: access='udp' demux='' path='@239.255.0.1:1234'
main debug: looking for access_demux module: 0 candidates
main debug: no access_demux module matched "udp"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: creating access 'udp' path='@239.255.0.1:1234'
main debug: looking for access module: 1 candidate
access_udp debug: opening server=:0 local=239.255.0.1:1234
main debug: net: opening 239.255.0.1 datagram port 1234
main debug: Multicast group join request
main debug: using access module "access_udp"
main debug: TIMER module_need() : 1.000 ms - Total 1.000 ms / 1 intvls (Avg 1.000 ms)
main debug: Using AStream*Block
main debug: pre buffering
qt4 debug: Updating the geometry
qt4 debug: Updating the geometry
main debug: incoming request - stopping current input
main debug: waitpipe: object killed
main debug: dying input
main debug: socket 880 polling interrupted
main debug: prebuffering done 0 bytes in 20s - 0 kbytes/s
main error: cannot pre fill buffer
main warning: cannot create a stream_t from access
main debug: removing module "access_udp"
main debug: thread ended
main debug: dead input
main debug: thread times: real 0m20.265000s, kernel 0m0.000000s, user 0m0.031200s
qt4 debug: IM: Deleting the input
qt4 debug: Updating the geometry
qt4 debug: Updating the geometry
main debug: TIMER input launching for 'udp://239.255.0.1:1234' : 20290.001 ms - Total 20290.001 ms / 1 intvls (Avg 20290.000 ms)