Using version 2.0.5 to 2.0.8 I could successfully convert a video file from one type to another... the file save menu would show all available extension types even after I selected a specific file conversion. However after installing version 2.1 when trying to convert files, regardless of which conversion type I choose .mp4 .asf etc. the conversion only saves the audio portion and leaves out the video (greatly reducing the file size) additionally the save menu only shows the extension I chose instead of all available types as before, unknown if that's relevant. Additionally VLC 2.1 would often (but not always) crash when starting a convert/save or trying to open a converted file after which, even trying to open VLC normally would cause it to crash before opening and could only be accessed by clicking on a "clean" file to initiate autoplay with VLC. Upon returning to 2.0.8 I could convert video properly again, if I reinstall 2.1, conversion problem returns.
(Possibly Unrelated, I originally tried to install 2.1 to resolve Firefox plugin issue/bug/clerical error. When I check for updates from 2.0.8 Check menu it says I have latest version)
System: HP Envy 23 All in one touch, Win 8Pro-64bit
VLC 2.1 convert/save not working
Forum rules
Please post only Windows specific questions in this forum category. If you don't know where to post, please read the different forums' rules. Thanks.
Please post only Windows specific questions in this forum category. If you don't know where to post, please read the different forums' rules. Thanks.
-
Lotesdelere
- Cone Master
- Posts: 9513
- Joined: 08 Sep 2006 04:39
- Location: Europe
Re: VLC 2.1 convert/save not working
What is your source file ?
Please open Tools -> Messages (set Verbosity to 2) before you start the conversion, and then paste the full resulting log here or on Pastebin.com if it's too long.
Please open Tools -> Messages (set Verbosity to 2) before you start the conversion, and then paste the full resulting log here or on Pastebin.com if it's too long.
Re: VLC 2.1 convert/save not working
I reinstalled 2.1.0 set the message verbosity to 2 (debug) but when it crashed all it did was tell me it had crashed and would I like to send a report. If any log was created where would I see it?
Re: VLC 2.1 convert/save not working
On a whim I decided to check the video settings to see if the video track was disabled but the entire video menu was grayed out. The originals of the files I'm trying to convert play correctly in VLC 2.1.0 as do all other video files including those that were converted using 2.0.8
-
Phoenixrising72
- New Cone
- Posts: 4
- Joined: 22 Oct 2013 17:51
Re: VLC 2.1 convert/save not working
Hi I just faced the same issue trying to convert an MP4 file into an MP3 file. I just upgraded to the most current version and conversion worked great before. What I did and I am happy to share to help others is I went and downloaded version 2.0.5 of the VLC player. When I installed that it uninstalled the current version and went back to the previous version. Now conversion works fine. Hope that helps 
Re: VLC 2.1 convert/save not working
Same for Reinstalling 2.0.8 the conversion problem doesn't happen there either
-
Lotesdelere
- Cone Master
- Posts: 9513
- Joined: 08 Sep 2006 04:39
- Location: Europe
Re: VLC 2.1 convert/save not working
First, reset VLC preferences:
http://wiki.videolan.org/Reset_prefs
How to get to a MS-DOS prompt:
http://www.computerhope.com/issues/chdos.htm
Then run VLC with this command line:
You may have to change the path to the destination file for a location folder where you're allowed to write in.
Start your conversion then post the full resulting log.
http://wiki.videolan.org/Reset_prefs
How to get to a MS-DOS prompt:
http://www.computerhope.com/issues/chdos.htm
Then run VLC with this command line:
Code: Select all
vlc --extraintf=logger --verbose=2 --logfile=C:\vlc.log --logmode=text --file-loggingStart your conversion then post the full resulting log.
Re: VLC 2.1 convert/save not working
seems that the problem doesn't exist in 2.1.1
Re: VLC 2.1 convert/save not working
Correction, after 2 successful conversions of different file types the problem resurfaced in 2.1.1 did full uninstall/reinstall (including delete cache/pref) problem persists switching back to 2.0.8 since it works
Re: VLC 2.1 convert/save not working
reinstalled 2.1.1 to make log file
deleted pref/cache "vlc" folder from appdata\roaming
first attempt .mp4 to .asf crashed
second attempt .flv to .mp4 "missing video" problem occurred, DOS prompt window gave the following on second attempt:
[03d44f24] logger interface: using logger
[03d44f24] logger interface debug: opening logfile 'C:\vlc.log'
(color cyan) [h264 @ 05b17de0] (color red) Missing reference picture, default is 0
(color cyan) [h264 @ 05b17de0] (color red) decode_slice_header error
Posting contents of vlc.log:
deleted pref/cache "vlc" folder from appdata\roaming
first attempt .mp4 to .asf crashed
second attempt .flv to .mp4 "missing video" problem occurred, DOS prompt window gave the following on second attempt:
[03d44f24] logger interface: using logger
[03d44f24] logger interface debug: opening logfile 'C:\vlc.log'
(color cyan) [h264 @ 05b17de0] (color red) Missing reference picture, default is 0
(color cyan) [h264 @ 05b17de0] (color red) decode_slice_header error
Posting contents of vlc.log:
Code: Select all
-- logger module started --
main debug: VLC media player - 2.1.1 Rincewind
main debug: Copyright © 1996-2013 the VideoLAN team
main debug: revision 2.1.1-0-g89db9aa
main debug: configured with ../extras/package/win32/../../../configure '--enable-update-check' '--enable-lua' '--enable-faad' '--enable-flac' '--enable-theora' '--enable-twolame' '--enable-quicktime' '--enable-avcodec' '--enable-merge-ffmpeg' '--enable-dca' '--enable-mpc' '--enable-libass' '--enable-x264' '--enable-schroedinger' '--enable-realrtsp' '--enable-live555' '--enable-dvdread' '--enable-shout' '--enable-goom' '--enable-caca' '--disable-sdl' '--enable-qt' '--enable-skins2' '--enable-sse' '--enable-mmx' '--enable-libcddb' '--enable-zvbi' '--disable-telx' '--enable-nls' '--disable-dirac' '--host=i686-w64-mingw32' 'host_alias=i686-w64-mingw32'
main debug: using interface module "logger"
main debug: looking for interface module matching "logger,none": 15 candidates
logger: VLC media player - 2.1.1 Rincewind
logger: Copyright © 1996-2013 the VideoLAN team
logger:
Warning: if you cannot access the GUI anymore, open a command-line window, go to the directory where you installed VLC and run "vlc -I qt"
logger: using logger.
logger debug: opening logfile `C:\vlc.log'
-- logger module started --
main debug: VLC media player - 2.1.1 Rincewind
main debug: Copyright © 1996-2013 the VideoLAN team
main debug: revision 2.1.1-0-g89db9aa
main debug: configured with ../extras/package/win32/../../../configure '--enable-update-check' '--enable-lua' '--enable-faad' '--enable-flac' '--enable-theora' '--enable-twolame' '--enable-quicktime' '--enable-avcodec' '--enable-merge-ffmpeg' '--enable-dca' '--enable-mpc' '--enable-libass' '--enable-x264' '--enable-schroedinger' '--enable-realrtsp' '--enable-live555' '--enable-dvdread' '--enable-shout' '--enable-goom' '--enable-caca' '--disable-sdl' '--enable-qt' '--enable-skins2' '--enable-sse' '--enable-mmx' '--enable-libcddb' '--enable-zvbi' '--disable-telx' '--enable-nls' '--disable-dirac' '--host=i686-w64-mingw32' 'host_alias=i686-w64-mingw32'
main debug: using interface module "logger"
main debug: creating audio output
main debug: looking for audio output module matching "any": 6 candidates
directsound debug: found 2 devices
main debug: using audio output module "directsound"
main debug: keeping audio output
main debug: looking for interface module matching "hotkeys,none": 15 candidates
main debug: using interface module "hotkeys"
main debug: looking for interface module matching "globalhotkeys,none": 15 candidates
main debug: using interface module "globalhotkeys"
main: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
main debug: looking for interface module matching "any": 15 candidates
qt4 debug: Boring first Run Wizard
main debug: looking for extension module matching "any": 1 candidates
lua debug: Opening Lua Extension module
lua debug: Trying Lua scripts in C:\Users\Ronald\AppData\Roaming\vlc\lua\extensions
lua debug: Trying Lua scripts in C:\Program Files (x86)\VideoLAN\VLC\lua\extensions
main debug: using extension module "lua"
main debug: using interface module "qt4"
qt4 debug: MRL passed to the Sout: file:///C:/Users/Ronald/Pictures/%2B%205%20to%20Punching_%20A%20Bunkers%20%26%20Badasses%20Prologue%20-%20YouTube.mp4
qt4 debug: Transcode MRL: sout=#transcode{vcodec=WMV2,vb=800,acodec=wma2,ab=128,channels=2,samplerate=44100}:std{access=file{no-overwrite},mux=asf,dst='C:\Users\Ronald\Videos\test1.asf'}
qt4 debug: Adding option: file-caching=300
qt4 debug: Adding option: sout=#transcode{vcodec=WMV2,vb=800,acodec=wma2,ab=128,channels=2,samplerate=44100}:std{access=file{no-overwrite},mux=asf,dst='C:\Users\Ronald\Videos\test1.asf'}
main debug: adding item `Streaming' ( file:///C:/Users/Ronald/Pictures/%2B%205%20to%20Punching_%20A%20Bunkers%20%26%20Badasses%20Prologue%20-%20YouTube.mp4 )
qt4 debug: Amdainding a ndeebugw M:RL to recen t ones: mfile:///pC:ra/oince dUsessbugin:eg rers/Ronald/Pqict ueuCreatreing an insput for s'tStre /ai%tem2Bm: Streaming, inode: %null205, ski%2p0to: %020Punching_n%20A%20
Bunkers%g2m0a%26%20Baidnasses%2'0Prologue %d20ebug
:- %2re0buYouTube.mpi4ld
ing array of current - root Playlist
main debug: rebuild done - 1 items, index 0
main debug: starting playback of the new playlist item
main debug: resyncing on Streaming
main debug: Streaming is at 0
main debug: creating new input thread
main debug: Creating an input for 'Streaming'
main debug: using sout chain=`transcode{vcodec=WMV2,vb=800,acodec=wma2,ab=128,channels=2,samplerate=44100}:std{access=file{no-overwrite},mux=asf,dst='C:\Users\Ronald\Videos\test1.asf'}'
main debug: stream=`std'
main debug: looking for sout stream module matching "std": 21 candidates
main debug: set config option: sout-standard-access to file{no-overwrite}
main debug: set config option: sout-standard-mux to asfq
t4 debmauign: dIebug: seMt: config Seotptitionn: gs aoutn input-
standard-dst to C:\Users\Ronald\Videos\test1.asf
main debug: looking for sout access module matching "file": 8 candidates
main debug: set config option: sout-file-overwrite to (null)
access_output_file debug: file access output opened (C:\Users\Ronald\Videos\test1.asf)
main debug: using sout access module "access_output_file"
main debug: looking for sout mux module matching "asf": 10 candidates
main debug: mno fux_asfe tcdh rebugequ:ir easf muxedr fopened
or (null) (mart uxcurrent_lasy (null))
f debug: Packet size 4096
mux_asf debug: meta data: title='', author='', copyright='', comment='', rating=''
main debug: using sout mux module "mux_asf"
stream_out_standard debug: using `file{no-overwrite}/asf://C:\Users\Ronald\Videos\test1.asf'
main debug: using sout stream module "stream_out_standard"
main debug: stream=`transcode'
main debug: looking for sout stream module matching "transcode": 21 candidates
main debug: set config option: sout-transcode-vcodec to WMV2
main debug: set config option: sout-transcode-vb to 800
main debug: set config option: sout-transcode-acodec to wma2
main debug: set config option: sout-transcode-ab to 128
main debug: set config option: sout-transcode-channels to 2
main debug: set config option: sout-transcode-samplerate to 44100
stream_out_transcode debug: codec audio=wma2 44100Hz 2 channels 128Kb/s
stream_out_transcode debug: codec video=WMV2 0x0 scaling: 0.000000 800kb/s
main debug: using sout stream module "stream_out_transcode"
main debug: using timeshift granularity of 50 MiB, in path 'C:\Users\Ronald\AppData\Local\Temp'
main debug: `file:///C:/Users/Ronald/Pictures/%2B%205%20to%20Punching_%20A%20Bunkers%20%26%20Badasses%20Prologue%20-%20YouTube.mp4' gives access `file' demux `' path `/C:/Users/Ronald/Pictures/%2B%205%20to%20Punching_%20A%20Bunkers%20%26%20Badasses%20Prologue%20-%20YouTube.mp4'
main debug: creating demux: access='file' demux='' location='/C:/Users/Ronald/Pictures/%2B%205%20to%20Punching_%20A%20Bunkers%20%26%20Badasses%20Prologue%20-%20YouTube.mp4' file='C:\Users\Ronald\Pictures\+ 5 to Punching_ A Bunkers & Badasses Prologue - YouTube.mp4'
main debug: looking for access_demux module matching "file": 12 candidates
main debug: no access_demux modules matched
main debug: creating access 'file' location='/C:/Users/Ronald/Pictures/%2B%205%20to%20Punching_%20A%20Bunkers%20%26%20Badasses%20Prologue%20-%20YouTube.mp4', path='C:\Users\Ronald\Pictures\+ 5 to Punching_ A Bunkers & Badasses Prologue - YouTube.mp4'
main debug: looking for access module matching "file": 20 candidates
filesystem debug: opening file `C:\Users\Ronald\Pictures\+ 5 to Punching_ A Bunkers & Badasses Prologue - YouTube.mp4'
main debug: using access module "filesystem"
main debug: Using stream method for AStream*
main debug: starting pre-buffering
main debug: received first data after 0 ms
main debug: pre-buffering done 1024 bytes in 0s - 1000000 KiB/s
main debug: looking for stream_filter module matching "any": 6 candidates
main debug: no stream_filter modules matched
main debug: looking for stream_filter module matching "record": 6 candidates
main debug: using stream_filter module "record"
main debug: creating demux: access='file' demux='' location='/C:/Users/Ronald/Pictures/%2B%205%20to%20Punching_%20A%20Bunkers%20%26%20Badasses%20Prologue%20-%20YouTube.mp4' file='C:\Users\Ronald\Pictures\+ 5 to Punching_ A Bunkers & Badasses Prologue - YouTube.mp4'
main debug: looking for demux module matching "mp4": 63 candidates
mp4 warning: unknown box type btrt (incompletely loaded)
mp4 warning: unknown box type gsst (incompletely loaded)
mp4 warning: unknown box type gstd (incompletely loaded)
mp4 warning: unknown box type gssd (incompletely loaded)
mp4 warning: unknown box type gspu (incompletely loaded)
mp4 warning: unknown box type gspm (incompletely loaded)
mp4 warning: unknown box type gshh (incompletely loaded)
mp4 debug: dumping root Box "root"
mp4 debug: | + ftyp size 24
mp4 debug: | + moov size 71878
mp4 debug: | | + mvhd size 108
mp4 debug: | | + iods size 21
mp4 debug: | | + trak size 29392
mp4 debug: | | | + tkhd size 92
mp4 debug: | | | + edts size 36
mp4 debug: | | | | + elst size 28
mp4 debug: | | | + mdia size 29256
mp4 debug: | | | | + mdhd size 32
mp4 debug: | | | | + hdlr size 45
mp4 debug: | | | | + minf size 29171
mp4 debug: | | | | | + vmhd size 20
mp4 debug: | | | | | + dinf size 36
mp4 debug: | | | | | | + dref size 28
mp4 debug: | | | | | | | + url size 12
mp4 debug: | | | | | + stbl size 29107
mp4 debug: | | | | | | + stsd size 167
mp4 debug: | | | | | | | + avc1 size 151
mp4 debug: | | | | | | | | + avcC size 45
mp4 debug: | | | | | | | | + btrt size 20
mp4 debug: | | | | | | + stts size 24
mp4 debug: | | | | | | + stss size 524
mp4 debug: | | | | | | + stsc size 52
mp4 debug: | | | | | | + stsz size 26428
mp4 debug: | | | | | | + stco size 1904
mp4 debug: | | + trak size 41593
mp4 debug: | | | + tkhd size 92
mp4 debug: | | | + mdia size 41493
mp4 debug: | | | | + mdhd size 32
mp4 debug: | | | | + hdlr size 76
mp4 debug: | | | | + minf size 41377
mp4 debug: | | | | | + smhd size 16
mp4 debug: | | | | | + dinf size 36
mp4 debug: | | | | | | + dref size 28
mp4 debug: | | | | | | | + url size 12
mp4 debug: | | | | | + stbl size 41317
mp4 debug: | | | | | | + stsd size 105
mp4 debug: | | | | | | | + mp4a size 89
mp4 debug: | | | | | | | | + esds size 53
mp4 debug: | | | | | | + stts size 24
mp4 debug: | | | | | | + stsc size 1312
mp4 debug: | | | | | | + stsz size 37968
mp4 debug: | | | | | | + stco size 1900
mp4 debug: | | + udta size 756
mp4 debug: | | | + meta size 748
mp4 debug: | | | | + hdlr size 33
mp4 debug: | | | | + ilst size 703
mp4 debug: | | | | | + gsst size 25
mp4 debug: | | | | | + gstd size 30
mp4 debug: | | | | | + gssd size 56
mp4 debug: | | | | | + gspu size 152
mp4 debug: | | | | | + gspm size 152
mp4 debug: | | | | | + gshh size 280
mp4 debug: | + mdat size 74483939
mp4 debug: unrecognized major file specification (mp42).
mp4 debug: found 2 tracks
mp4 warning: elst box found
mp4 debug: - [0] duration=220270ms media time=0ms) rate=1.0
mp4 debug: track[Id 0x1] read 472 chunk
mp4 debug: track[Id 0x1] read 6602 samples length:220s
main debug: selecting program id=0
mp4 debug: adding track[Id 0x1] video (enable) language undef
mp4 debug: track[Id 0x2] read 471 chunk
mp4 debug: track[Id 0x2] read 9487 samples length:220s
mp4 debug: adding track[Id 0x2] audio (enable) language undef
main debug: using demux module "mp4"
main debug: looking for a subtitle file in C:\Users\Ronald\Pictures\
main debug: looking for packetizer module matching "any": 21 candidates
packetizer_h264 debug: found NAL_SPS (sps_id=0)
packetizer_h264 debug: found NAL_PPS (pps_id=0 sps_id=0)
packetizer_h264 debug: avcC length size=4, sps=1, pps=1
main debug: using packetizer module "packetizer_h264"
main debug: looking for packetizer module matching "any": 21 candidates
packetizer_mpeg4audio debug: running MPEG4 audio packetizer
packetizer_mpeg4audio debug: AAC 44100Hz 1024 samples/frame
main debug: using packetizer module "packetizer_mpeg4audio"
main debug: starting in sync mode
main debug: looking for meta reader module matching "any": 2 candidates
lua debug: Trying Lua scripts in C:\Users\Ronald\AppData\Roaming\vlc\lua\meta\reader
lua debug: Trying Lua scripts in C:\Program Files (x86)\VideoLAN\VLC\lua\meta\reader
lua debug: Trying Lua playlist script C:\Program Files (x86)\VideoLAN\VLC\lua\meta\reader\filename.luac
main debug: no meta reader modules matched
main debug: `file:///C:/Users/Ronald/Pictures/%2B%205%20to%20Punching_%20A%20Bunkers%20%26%20Badasses%20Prologue%20-%20YouTube.mp4' successfully opened
mp4 debug: elst (0) gives 0ms (movie)-> 0ms (track)
mp4 debug: track[Id 0x1] using Sync Sample Box (stss)
mp4 debug: stts gives 0 --> 0 (sample number)
mp4 debug: track[Id 0x2] does not provide Sync Sample Box (stss)
main debug: Buffering 0%
main debug: switching to async mode
mmaaiinm adnei debung: deBbuffering b0uugg%::
aadding damd neiw sonautin g debiug:n p auBufft ering 3 3%(n
seowut_i mnputs:a0ino u3debu9g237d0: )tB
inuput (fsout_instream_out_transcfodepeu tr:d03ebugi9n:9g ec4b606)%r
eating video transmaincodi ndgeb fruomg fcc=`h26:4 'Buffering 1to fcc=`0WMV20'%
mainma deinbu degbug:: Stream lbuoffeokingring don e (for 40de0cod er mms in 2o ms)du
le matching "any": 39 candidates
avcodec debug: trying to use direct rendering
avcodec debug: allowing 4 thread(s) for decoding
avcodec debug: avcodec codec (H264 - MPEG-4 AVC (part 10)) started
avcodec debug: using frame thread mode with 4 threads
main debug: using decoder module "avcodec"
main debug: looking for encoder module matching "any": 17 candidates
avcodec debug: found encoder Windows Media Video 8
main debug: using encoder module "avcodec"
main debug: removing module "avcodec"
stream_out_transcode debug: creating audio transcoding from fcc=`mp4a' to fcc=`wma2'
main debug: looking for decoder module matching "any": 39 candidates
main debug: using decoder module "faad"
main debug: looking for encoder module matching "any": 17 candidates
avcodec debug: Trying to find packet sample format instead of planar fltp
avcodec debug: Ended up using fltp as sample format
avcodec debug: found encoder Windows Media Audio 2
main debug: using encoder module "avcodec"
main debug: input 'f32l' 44100 Hz Stereo frame=1 samples/8 bytes
main debug: conversion: 'f32l'->'f32l' 44100 Hz->44100 Hz Stereo->Stereo
main debug: conversion pipeline complete
main debug: looking for audio resampler module matching "any": 3 candidates
main debug: using audio resampler module "samplerate"
main debug: adding a new input
mux_asf debug: adding input
main debug: Decoder buffering done in 48 ms
avcodec debug: using direct rendering
faad warning: decoded zero sample
-- logger module started --
main debug: VLC media player - 2.1.1 Rincewind
main debug: Copyright © 1996-2013 the VideoLAN team
main debug: revision 2.1.1-0-g89db9aa
main debug: configured with ../extras/package/win32/../../../configure '--enable-update-check' '--enable-lua' '--enable-faad' '--enable-flac' '--enable-theora' '--enable-twolame' '--enable-quicktime' '--enable-avcodec' '--enable-merge-ffmpeg' '--enable-dca' '--enable-mpc' '--enable-libass' '--enable-x264' '--enable-schroedinger' '--enable-realrtsp' '--enable-live555' '--enable-dvdread' '--enable-shout' '--enable-goom' '--enable-caca' '--disable-sdl' '--enable-qt' '--enable-skins2' '--enable-sse' '--enable-mmx' '--enable-libcddb' '--enable-zvbi' '--disable-telx' '--enable-nls' '--disable-dirac' '--host=i686-w64-mingw32' 'host_alias=i686-w64-mingw32'
main debug: using interface module "logger"
main debug: looking for interface module matching "logger,none": 15 candidates
logger: VLC media player - 2.1.1 Rincewind
logger: Copyright © 1996-2013 the VideoLAN team
logger:
Warning: if you cannot access the GUI anymore, open a command-line window, go to the directory where you installed VLC and run "vlc -I qt"
logger: using logger.
logger debug: opening logfile `C:\vlc.log'
-- logger module started --
main debug: VLC media player - 2.1.1 Rincewind
main debug: Copyright © 1996-2013 the VideoLAN team
main debug: revision 2.1.1-0-g89db9aa
main debug: configured with ../extras/package/win32/../../../configure '--enable-update-check' '--enable-lua' '--enable-faad' '--enable-flac' '--enable-theora' '--enable-twolame' '--enable-quicktime' '--enable-avcodec' '--enable-merge-ffmpeg' '--enable-dca' '--enable-mpc' '--enable-libass' '--enable-x264' '--enable-schroedinger' '--enable-realrtsp' '--enable-live555' '--enable-dvdread' '--enable-shout' '--enable-goom' '--enable-caca' '--disable-sdl' '--enable-qt' '--enable-skins2' '--enable-sse' '--enable-mmx' '--enable-libcddb' '--enable-zvbi' '--disable-telx' '--enable-nls' '--disable-dirac' '--host=i686-w64-mingw32' 'host_alias=i686-w64-mingw32'
main debug: using interface module "logger"
main debug: creating audio output
main debug: looking for audio output module matching "any": 6 candidates
directsound debug: found 2 devices
main debug: using audio output module "directsound"
main debug: keeping audio output
main debug: looking for interface module matching "hotkeys,none": 15 candidates
main debug: using interface module "hotkeys"
main debug: looking for interface module matching "globalhotkeys,none": 15 candidates
main debug: using interface module "globalhotkeys"
main: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
main debug: looking for interface module matching "any": 15 candidates
main debug: creating access 'http' location='update.videolan.org/vlc/status-win-x86', path='\\update.videolan.org\vlc\status-win-x86'
main debug: looking for access module matching "http": 20 candidates
access_http debug: querying proxy for http://update.videolan.org/vlc/status-win-x86
access_http debug: no proxy
access_http debug: http: server='update.videolan.org' port=80 file='/vlc/status-win-x86'
mainm daeibung debug: :n elt: oconoknecting tion gu pfdaotr eext.videolan.orge ponsriton 8m0odul
e matching "any": 1 candidates
lua debug: Opening Lua Extension module
lua debug: Trying Lua scripts in C:\Users\Ronald\AppData\Roaming\vlc\lua\extensions
lua debug: Trying Lua scripts in C:\Program Files (x86)\VideoLAN\VLC\lua\extensions
main debug: using extension module "lua"
main debug: using interface module "qt4"
main debug: connection succeeded (socket = 1824)
access_http debug: protocol 'HTTP' answer code 206
access_http debug: Server: nginx/1.5.6
access_http debug: Content-Type: text/plain
access_http debug: this frame size=273
access_http debug: Connection: close
access_http debug: stream size=273,pos=0,remaining=273
main debug: using access module "access_http"
main debug: Using stream method for AStream*
main debug: starting pre-buffering
main debug: received first data after 0 ms
main debug: pre-buffering done 273 bytes in 0s - 266 KiB/s
main debug: removing module "access_http"
main debug: creating access 'http' location='update.videolan.org/vlc/status-win-x86.asc', path='\\update.videolan.org\vlc\status-win-x86.asc'
main debug: looking for access module matching "http": 20 candidates
access_http debug: querying proxy for http://update.videolan.org/vlc/status-win-x86.asc
access_http debug: no proxy
access_http debug: http: server='update.videolan.org' port=80 file='/vlc/status-win-x86.asc'
main debug: net: connecting to update.videolan.org port 80
main debug: connection succeeded (socket = 1768)
access_http debug: protocol 'HTTP' answer code 206
access_http debug: Server: nginx/1.5.6
access_http debug: Content-Type: text/plain
access_http debug: this frame size=198
access_http debug: Connection: close
access_http debug: stream size=198,pos=0,remaining=198
main debug: using access module "access_http"
main debug: Using stream method for AStream*
main debug: starting pre-buffering
main debug: received first data after 0 ms
main debug: pre-buffering done 198 bytes in 0s - 193359 KiB/s
main debug: Downloading signature (198 bytes)
main debug: removing module "access_http"
main debug: Unarmoring signature
main: Status file authenticated
qt4 debug: MRL passed to the Sout: file:///C:/Users/Ronald/Pictures/test0.flv
qt4 debug: Transcode MRL: sout=#transcode{vcodec=h264,acodec=mpga,ab=128,channels=2,samplerate=44100}:std{access=file{no-overwrite},mux=mp4,dst='C:\Users\Ronald\Videos\test5.mp4'}
qt4 debug: Adding option: file-caching=300
qt4 debug: Adding option: sout=#transcode{vcodec=h264,acodec=mpga,ab=128,channels=2,samplerate=44100}:std{access=file{no-overwrite},mux=mp4,dst='C:\Users\Ronald\Videos\test5.mp4'}
main debug: adding item `Streaming' ( file:///C:/Users/Ronald/Pictures/test0.flv )
qt4 debugma: inAd ddebing uga : newpr ocessing requestm item: StreamingM, node: Rnull, skip: L0
taoin drebuge:cent m Caoirnne ds: eefaiblting e:/uan/ in/C:gp/:ut Usfers/ Rreoor 'nald/Pictures/test0.flvS
btreaminugilding a'rr
ay of current - root Playlist
main debug: rebuild done - 1 items, index 0
main debug: starting playback of the new playlist item
main debug: resyncing on Streaming
main debug: Streaming is at 0
main debug: creating new input thread
main debug: Creating an input for 'Streaming'
main debug: using sout chain=`transcode{vcodec=h264,acodec=mpga,ab=128,channels=2,samplerate=44100}:std{access=file{no-overwrite},mux=mp4,dst='C:\Users\Ronald\Videos\test5.mp4'}'
main debug: stream=`std'
main debug: looking for sout stream module matching "std": 21 candidates
qt4 debug: IM: Setting an input
main debug: set config option: sout-standard-access to file{no-overwrite}
main debug: set config option: sout-standard-mux to mp4
main debug: set config option: sout-standard-dst to C:\Users\Ronald\Videos\test5.mp4
main debug: looking for sout access module matching "file": 8 candidates
main debug: set config option: sout-file-overwrite to (null)
access_output_file debug: file access output opened (C:\Users\Ronald\Videos\test5.mp4)
main debug: using sout access module "access_output_file"
main debug: looking for sout mux module matching "mp4": 10 candidates
mux_mp4 debug: Mp4 muxer opened
main debug: using sout mux module "mux_mp4"
stream_out_standard debug: using `file{no-overwrite}/mp4://C:\Users\Ronald\Videos\test5.mp4'
main debug: using sout stream module "stream_out_standard"
main debug: stream=`transcode'
main debug: looking for sout stream module matching "transcode": 21 candidates
main debug: set config option: sout-transcode-vcodec to h264
main debug: set config option: sout-transcode-acodec to mpga
main debug: set config option: sout-transcode-ab to 128
main debug: set config option: sout-transcode-channels to 2
main debug: set config option: sout-transcode-samplerate to 44100
stream_out_transcode debug: codec audio=mpga 44100Hz 2 channels 128Kb/s
stream_out_transcode debug: codec video=h264 0x0 scaling: 0.000000 0kb/s
main debug: using sout stream module "stream_out_transcode"
main debug: using timeshift granularity of 50 MiB, in path 'C:\Users\Ronald\AppData\Local\Temp'
main debug: `file:///C:/Users/Ronald/Pictures/test0.flv' gives access `file' demux `' path `/C:/Users/Ronald/Pictures/test0.flv'
main debug: creating demux: access='file' demux='' location='/C:/Users/Ronald/Pictures/test0.flv' file='C:\Users\Ronald\Pictures\test0.flv'
main debug: looking for access_demux module matching "file": 12 candidates
main debug: no access_demux modules matched
main debug: creating access 'file' location='/C:/Users/Ronald/Pictures/test0.flv', path='C:\Users\Ronald\Pictures\test0.flv'
main debug: looking for access module matching "file": 20 candidates
filesystem debug: opening file `C:\Users\Ronald\Pictures\test0.flv'
main debug: using access module "filesystem"
main debug: Using stream method for AStream*
main debug: starting pre-buffering
main debug: received first data after 0 ms
main debug: pre-buffering done 1024 bytes in 0s - 1000000 KiB/s
main debug: looking for stream_filter module matching "any": 6 candidates
main debug: no stream_filter modules matched
main debug: looking for stream_filter module matching "record": 6 candidates
main debug: using stream_filter module "record"
main debug: creating demux: access='file' demux='' location='/C:/Users/Ronald/Pictures/test0.flv' file='C:\Users\Ronald\Pictures\test0.flv'
main debug: looking for demux module matching "any": 63 candidates
mod debug: MOD validation failed (ext=flv)
ts debug: TS module discarded (lost sync)
avcodec debug: trying url: C:\Users\Ronald\Pictures\test0.flv
avcodec debug: detected format: flv
main debug: meta ok for (null), need to fetch art
main debug: looking for meta fetcher module matching "any": 1 candidates
lua debug: Trying Lua scripts in C:\Users\Ronald\AppData\Roaming\vlc\lua\meta\fetcher
lua debug: Trying Lua scripts in C:\Program Files (x86)\VideoLAN\VLC\lua\meta\fetcher
lua debug: Trying Lua playlist script C:\Program Files (x86)\VideoLAN\VLC\lua\meta\fetcher\tvrage.luac
main debug: using meta fetcher module "lua"
mainm aidebnug deb:ug : rseelemctoving pironggra mm oidd=u0l
e "lua"
main debug: avcsodeeca debugr: cadhdiing es: videon gcodec = ha2rt64 fo(r2 8Streaming)
main debug: looking for art finder module matcahvcodec debuign:g a"ddaning yes: "a: ud2 candidaitoes c
odec = mp4a (86018)
avcodec debug: AVFormat supported stream
avcodec debug: - format = flv (FLV (Flash Video))
avcodec debug: - start timle = ua3 debug:7 000T
rying Lua savccrodeipts inc dC:\eUserbugs\Ronald\AppData\Roaming\vlc\lua\meta:\ a r t-
duration = 2572153000lu
a debug:m aiTrying Luan debug: ussincg ridemptuxs m inod ule C:\Program File"sa v(x86co)dec\VideoL"AN\
VLC\lua\meta\art
main debug: looking for a subtiltle file uian Cd:\Uesbuers\Ronagld:\P iTcturres\y
ing Lua playlist script C:\Program Files (x86)\VideoLAN\VLC\lua\meta\art\00_musicbrainz.luac
lua debug: Trying Lua playlist script C:\Program Files mai(x86n)\ dVideoLAeNbu\VLC\luga\m: eta\art\01_googleimlaogoek.ingluac for
packetizer module matching "any": 21 candidates
lua debug: Trying Lua playlist script C:\Program Files (x86)\VideoLAN\VLC\lua\meta\art\02_frenchtv.luac
lua debug: Trying Lua playlist script C:\Program Files (x86)\VideoLAN\VLC\lua\meta\art\03_lastfm.luac
main debug: no art finder modules matched
main debug: art not found for Streaming
packetizer_h264 debug: found NAL_SPS (sps_id=0)
packetizer_h264 debug: found NAL_PPS (pps_id=0 sps_id=0)
packetizer_h264 debug: avcC length size=4, sps=1, pps=1
main debug: using packetizer module "packetizer_h264"
main debug: looking for packetizer module matching "any": 21 candidates
packetizer_mpeg4audio debug: running MPEG4 audio packetizer
packetizer_mpeg4audio debug: AAC 44100Hz 1024 samples/frame
main debug: using packetizer module "packetizer_mpeg4audio"
main debug: starting in sync mode
main debug: looking for meta reader module matching "any": 2 candidates
lua debug: Trying Lua scripts in C:\Users\Ronald\AppData\Roaming\vlc\lua\meta\reader
lua debug: Trying Lua scripts in C:\Program Files (x86)\VideoLAN\VLC\lua\meta\reader
lua debug: Trying Lua playlist script C:\Program Files (x86)\VideoLAN\VLC\lua\meta\reader\filename.luac
main debug: no meta reader modules matched
main debug: `file:///C:/Users/Ronald/Pictures/test0.flv' successfully opened
main debug: Buffering 0%
main debug: switching to async mode
main debug: Buffering 0%
main debug: Buffering m0ai%n
debug: admding ama anewin debsouiutng :d e abiugn: dBduffering a new isnout piunput (sout_intpu t:g05ba5e20)(
so u1t_inp%ut:
05sbt3a370r)me
aam_out_triannscode de bdebugu: g:Buffe ring creating video transcoding fro7m%
fcc=`h264' to fcmc=`aih264n' debug:
Buffering 15%
main debugm: ailooking for nd edecbouderg module matchin:g B"ufafny"e: r39ing c andidates1
5%
main debug: Buffering 23%
main debug: Buffering 29%
main debug: Buffering 29%
main debug: Buffering 38%
main debug: Buffering 43%
main debug: Buffering 43%
main debug: Buffering 54%
main debug: Buffering 56%
main debug: Buffering 56%
main debug: Buffering 69%
main debug: Buffering 71%
main debug: Buffering 77%
main debug: Buffering 85%
main debug: Buffering 85%
main debug: Buffering 92%
main debug: Buffering 98%
main debug: Buffering 98%
avcodecma indebug deb: ugtrying t:o uStream buffering done (s3e2 5d msirect rend eirn ing5
ms)
avcodec debug: allowing 4 thread(s) for decoding
avcodec debug: avcodec codec (H264 - MPEG-4 AVC (part 10)) started
avcodec debug: using frame thread mode with 4 threads
main debug: using decoder module "avcodec"
main debug: looking for encoder module matching "any": 17 candidates
x264 debug: version x264 0.135.X
x264: using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX
x264: profile High, level 3.0
main debug: using encoder module "x264"
main debug: removing module "x264"
x264 debug: framecount still in libx264 buffer: 0
stream_out_transcode debug: creating audio transcoding from fcc=`mp4a' to fcc=`mpga'
main debug: looking for decoder module matching "any": 39 candidates
main debug: using decoder module "faad"
main debug: looking for encoder module matching "any": 17 candidates
main debug: using encoder module "twolame"
main debug: input 'f32l' 44100 Hz Stereo frame=1 samples/8 bytes
main debug: conversion: 'f32l'->'s16l' 44100 Hz->44100 Hz Stereo->Stereo
main debug: looking for audio converter module matching "any": 12 candidates
audio_format debug: f32l->s16l, bits per sample: 32->16
main debug: using audio converter module "audio_format"
main debug: conversion pipeline complete
main debug: looking for audio resampler module matching "any": 3 candidates
main debug: using audio resampler module "ugly_resampler"
main debug: adding a new input
mux_mp4 debug: adding input
main debug: Decoder buffering done in 129 ms
main warning: trying to send non-dated fpaaacketd to s wtraream outnpingu:t!
decoded zero sample
avcodec debug: using direct rendering
stream_out_transcode debug: decoder aspect is 1.782178:1
stream_out_transcode debug: source pixel aspect is 1.000000:1
stream_out_transcode debug: scaled pixel aspect is 1.000000:1
stream_out_transcode debug: source 720x404, destination 720x404
stream_out_transcode debug: encoder aspect is 720:404
stream_out_transcode debug: destination (after video filters) 720x404
main debug: looking for encoder module matching "any": 17 candidates
x264 debug: version x264 0.135.X
x264: using SAR=1/1
x264: using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX
x264: profile High, level 3.0
main debug: using encoder module "x264"
main error: cannot add a new stream (unsupported while muxing to this format). You can try increasing sout-mux-caching value
stream_out_transcode error: cannot add this stream
main debug: removing module "avcodec"
avcodec debug: ffmpeg codec (H264 - MPEG-4 AVC (part 10)) stopped
main debug: removing module "x264"
x264 debug: framecount still in libx264 buffer: 0
main debug: EOF reached
main debug: waiting decoder fifos to empty
main debug: finished input
main debug: removing module "packetizer_h264"
main debug: killing decoder fourcc `h264', 0 PES in FIFO
main debug: removing a sout input (sout_input:05ba5e20)
main debug: removing module "packetizer_mpeg4audio"
main debug: killing decoder fourcc `mp4a', 0 PES in FIFO
main debug: removing a sout input (sout_input:05b3a370)
main debug: removing module "faad"
main debug: removing module "twolame"
main debug: removing module "ugly_resampler"
main debug: removing module "audio_format"
mux_mp4 debug: removing input
main warning: no more input streams for this mux
main debug: removing module "avcodec"
main debug: removing module "record"
main debug: removing module "filesystem"
main debug: Program doesn't contain anymore ES
main debug: dead input
main debug: destroying useless sout
main debug: destroying chain... (name=transcode)
main debug: removing module "stream_out_transcode"
main debug: destroying chain done
main debug: destroying chain... (name=std)
main debug: removing module "stream_out_standard"
main debug: removing module "mux_mp4"
mux_mp4 debug: Close
mux_mp4 debug: movie duration 2571s
mux_mp4 debug: created 1 chunks (stco)
main debug: removing module "access_output_file"
access_output_file debug: file access output closed
main debug: destroying chain done
main debug: changing item without a request (current 0/1)
main debug: nothing to play
qt4 debug: IM: Deleting the inputRe: VLC 2.1 convert/save not working
VLC v2.1.0 or v2.1.1 running on Windows 7:
Source file: http://a1408.g.akamai.net/5/1408/1388/2 ... od.m4v.zip
(taken from bug#9200 discussion)
Steps to re-create issue:
Source file: http://a1408.g.akamai.net/5/1408/1388/2 ... od.m4v.zip
(taken from bug#9200 discussion)
Steps to re-create issue:
- Use GUI.
- Convert / Save...
- Use source file above (I've been using 3gp sources that lack audio in v2.0.x without issue, then encountered this starting with v2.1.0)
- Create a new profile for conversions
- The profile should have:
Encapsulation tab: MP4/MOV selected
Video codec tab: Video - checked, Keep original video track - checked
Audio codec tab: Nothing checked
Subtitles tab: Nothing checked - Select the new profile and Start.
Re: VLC 2.1 convert/save not working
I seem to be having the same problem.Correction, after 2 successful conversions of different file types the problem resurfaced in 2.1.1 did full uninstall/reinstall (including delete cache/pref) problem persists switching back to 2.0.8 since it works
I had not been using VLC 2.0.x on my WIN 7 PC because of continuous crashing upon start up. It would not run no matter what version I used. Version 2.1.1 was released and I decided to try my luck. I installed version 2.1.1 on 64-bit Windows 7 Home Premium SP1/AMD Athlon II X4 - 2.9 GHz/ATI Radeon HD 4200 - 256MB. All went well ... VLC launched without crashing. It seemed to be okay. I loaded a .wtv file and it played. I chose to Convert / Save the file as an MP4 file. My first attempt resulted in video but no audio. I made some adjustments and my second, third and fourth attempt were successful; all having video and audio. Today I am trying to do the same conversion and I am getting audio but no video. The only thing I changed was turning on the "De-interlace" option. I thought maybe that was somehow causing the video to not convert and turned it off, but that did not fix the problem.
MacBook Pro - Intel Core i7 Quad 2.2 GHz - Intel HD Graphics 3000 384 MB - 4 GB DDR3 1333 MHz RAM - OS X 10.9.5
-
Jean-Baptiste Kempf
- Site Administrator
- Posts: 37519
- Joined: 22 Jul 2005 15:29
- VLC version: 4.0.0-git
- Operating System: Linux, Windows, Mac
- Location: Cone, France
- Contact:
Re: VLC 2.1 convert/save not working
2.1.2 sould be better on this. We have many fixes for 2.2.0 too.
Jean-Baptiste Kempf
http://www.jbkempf.com/ - http://www.jbkempf.com/blog/category/Videolan
VLC media player developer, VideoLAN President and Sites administrator
If you want an answer to your question, just be specific and precise. Don't use Private Messages.
http://www.jbkempf.com/ - http://www.jbkempf.com/blog/category/Videolan
VLC media player developer, VideoLAN President and Sites administrator
If you want an answer to your question, just be specific and precise. Don't use Private Messages.
Re: VLC 2.1 convert/save not working
News flash 2.1.2 is even worse... it keeps trying to save everything as .raw (which cannot be changed) and simply crashes as soon as you try to start the process, going back to 2.0.8... again
Re: VLC 2.1 convert/save not working
I confirm that this VLC 2.1.2 converter does not work anymore, whereas 2.0.X versions did. I tried to convert a MTS file to AVI, which I successfully did many times before . The source came directly from a Sony Camrecorder copied to the hard disk. The verbosed log file message is this one if this can help :
main warning: trying to send non-dated packet to stream output! (3000 times)
The full log file is :
(on windows XP)
qt4 debug: MRL passed to the Sout: file:///M:/Mes%20Documents/Mes%20vid%C3%A9os/Guitare2014/00012.MTS
qt4 debug: Transcode MRL: sout=#transcode{acodec=mp4a,ab=192,channels=2,samplerate=48000,scodec=dvbs}:std{access=file{no-overwrite},mux=avi,dst='M:\Mes Documents\Mes vidéos\Guitare2014\0012.avi'}
qt4 debug: Adding option: file-caching=300
qt4 debug: Adding option: sout=#transcode{acodec=mp4a,ab=192,channels=2,samplerate=48000,scodec=dvbs}:std{access=file{no-overwrite},mux=avi,dst='M:\Mes Documents\Mes vidéos\Guitare2014\0012.avi'}
main debug: adding item `Diffusion' ( file:///M:/Mes%20Documents/Mes%20vid%C3%A9os/Guitare2014/00012.MTS )
qt4 debug: Adding a new MRL to recent ones: file:///M:/Mes%20Documents/Mes%20vid%C3%A9os/Guitare2014/00012.MTS
main debug: processing request item: Diffusion, node: null, skip: 0
main debug: rebuilding array of current - root Liste de lecture
main debug: rebuild done - 1 items, index 0
main debug: starting playback of the new playlist item
main debug: resyncing on Diffusion
main debug: Diffusion is at 0
main debug: creating new input thread
main debug: Creating an input for 'Diffusion'
main debug: using sout chain=`transcode{acodec=mp4a,ab=192,channels=2,samplerate=48000,scodec=dvbs}:std{access=file{no-overwrite},mux=avi,dst='M:\Mes Documents\Mes vidéos\Guitare2014\0012.avi'}'
main debug: stream=`std'
main debug: looking for sout stream module matching "std": 21 candidates
main debug: set config option: sout-standard-access to file{no-overwrite}
main debug: set config option: sout-standard-mux to avi
main debug: set config option: sout-standard-dst to M:\Mes Documents\Mes vidéos\Guitare2014\0012.avi
main debug: looking for sout access module matching "file": 8 candidates
main debug: Creating an input for 'Diffusion'
main debug: set config option: sout-file-overwrite to (null)
access_output_file debug: file access output opened (M:\Mes Documents\Mes vidéos\Guitare2014\0012.avi)
main debug: using sout access module "access_output_file"
main debug: looking for sout mux module matching "avi": 10 candidates
mux_avi debug: AVI muxer opened
main debug: using sout mux module "mux_avi"
stream_out_standard debug: using `file{no-overwrite}/avi://M:\Mes Documents\Mes vidéos\Guitare2014\0012.avi'
main debug: using sout stream module "stream_out_standard"
main debug: stream=`transcode'
main debug: looking for sout stream module matching "transcode": 21 candidates
main debug: set config option: sout-transcode-acodec to mp4a
main debug: set config option: sout-transcode-ab to 192
main debug: set config option: sout-transcode-channels to 2
main debug: set config option: sout-transcode-samplerate to 48000
main debug: set config option: sout-transcode-scodec to dvbs
stream_out_transcode debug: codec audio=mp4a 48000Hz 2 channels 192Kb/s
stream_out_transcode debug: codec spu=dvbs
main debug: using sout stream module "stream_out_transcode"
main debug: using timeshift granularity of 50 MiB, in path 'C:\DOCUME~1\User\LOCALS~1\Temp'
main debug: `file:///M:/Mes%20Documents/Mes%20vid%C3%A9os/Guitare2014/00012.MTS' gives access `file' demux `' path `/M:/Mes%20Documents/Mes%20vid%C3%A9os/Guitare2014/00012.MTS'
main debug: creating demux: access='file' demux='' location='/M:/Mes%20Documents/Mes%20vid%C3%A9os/Guitare2014/00012.MTS' file='M:\Mes Documents\Mes vidéos\Guitare2014\00012.MTS'
main debug: looking for access_demux module matching "file": 12 candidates
main debug: no access_demux modules matched
main debug: creating access 'file' location='/M:/Mes%20Documents/Mes%20vid%C3%A9os/Guitare2014/00012.MTS', path='M:\Mes Documents\Mes vidéos\Guitare2014\00012.MTS'
main debug: looking for access module matching "file": 20 candidates
filesystem debug: opening file `M:\Mes Documents\Mes vidéos\Guitare2014\00012.MTS'
main debug: using access module "filesystem"
main debug: Using stream method for AStream*
main debug: starting pre-buffering
main debug: received first data after 0 ms
main debug: pre-buffering done 1024 bytes in 0s - 1000000 KiB/s
main debug: looking for stream_filter module matching "any": 6 candidates
main debug: no stream_filter modules matched
main debug: looking for stream_filter module matching "record": 6 candidates
main debug: using stream_filter module "record"
main debug: creating demux: access='file' demux='' location='/M:/Mes%20Documents/Mes%20vid%C3%A9os/Guitare2014/00012.MTS' file='M:\Mes Documents\Mes vidéos\Guitare2014\00012.MTS'
main debug: looking for demux module matching "any": 63 candidates
qt4 debug: IM: Setting an input
mod debug: MOD validation failed (ext=MTS)
ts warning: lost synchro
ts debug: skipping 4 bytes of garbage
ts warning: lost synchro
ts debug: skipping 81 bytes of garbage
ts warning: lost synchro
ts debug: skipping 158 bytes of garbage
ts warning: lost synchro
ts debug: skipping 43 bytes of garbage
ts warning: lost synchro
ts debug: skipping 120 bytes of garbage
ts warning: lost synchro
ts debug: skipping 5 bytes of garbage
ts warning: lost synchro
ts debug: skipping 82 bytes of garbage
ts warning: lost synchro
ts debug: skipping 159 bytes of garbage
ts warning: lost synchro
ts debug: skipping 44 bytes of garbage
ts warning: lost synchro
ts debug: skipping 121 bytes of garbage
ts warning: lost synchro
ts debug: skipping 4 bytes of garbage
ts warning: lost synchro
ts debug: skipping 4 bytes of garbage
ts debug: pid[256] unknown
ts debug: pid[31] unknown
ts debug: pid[4097] unknown
ts debug: pid[4113] unknown
ts debug: pid[4352] unknown
ts debug: PATCallBack called
ts debug: new PAT ts_id=0 version=0 current_next=1
ts debug: * number=0 pid=31
ts debug: * number=1 pid=256
ts debug: PMTCallBack called
ts debug: new PMT program number=1 version=0 pid_pcr=4097
ts debug: * descriptor : registration HDMV
ts debug: * descriptor : unknown (0x88)
ts debug: * es pid=4113 type=27 dr->i_tag=0x5
ts debug: * es pid=4113 type=27 fcc=h264
main debug: selecting program id=1
ts debug: * es pid=4352 type=129 dr->i_tag=0x5
ts debug: * es pid=4352 type=129 dr->i_tag=0x81
ts debug: * es pid=4352 type=129 fcc=a52
ts debug: * es pid=4608 type=144 fcc=bdpg
filesystem warning: unimplemented query 4097 in control
main debug: using demux module "ts"
main debug: looking for a subtitle file in M:\Mes Documents\Mes vidéos\Guitare2014\
main debug: looking for packetizer module matching "any": 21 candidates
main debug: using packetizer module "packetizer_h264"
main debug: looking for packetizer module matching "any": 21 candidates
main debug: using packetizer module "a52"
main debug: meta ok for (null), need to fetch art
ts debug: DEMUX_SET_GROUP 0 00000000
main debug: starting in sync mode
main debug: looking for meta reader module matching "any": 2 candidates
lua debug: Trying Lua scripts in C:\Documents and Settings\User\Application Data\vlc\lua\meta\reader
lua debug: Trying Lua scripts in C:\Program Files\VideoLAN\VLC\lua\meta\reader
lua debug: Trying Lua playlist script C:\Program Files\VideoLAN\VLC\lua\meta\reader\filename.luac
main debug: no meta reader modules matched
main debug: `file:///M:/Mes%20Documents/Mes%20vid%C3%A9os/Guitare2014/00012.MTS' successfully opened
ts warning: first packet for pid=4113 cc=0x4
main debug: Buffering 0%
ts warning: first packet for pid=4352 cc=0x4
main debug: looking for meta fetcher module matching "any": 1 candidates
lua debug: Trying Lua scripts in C:\Documents and Settings\User\Application Data\vlc\lua\meta\fetcher
lua debug: Trying Lua scripts in C:\Program Files\VideoLAN\VLC\lua\meta\fetcher
main debug: switching to async mode
packetizer_h264 debug: found NAL_PPS (pps_id=0 sps_id=0)
packetizer_h264 warning: waiting for SPS/PPS
lua debug: Trying Lua playlist script C:\Program Files\VideoLAN\VLC\lua\meta\fetcher\tvrage.luac
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
a52 debug: A/52 channels:6 samplerate:48000 bitrate:448000
main debug: adding a new sout input (sout_input:027e7b88)
stream_out_transcode debug: creating audio transcoding from fcc=`a52 ' to fcc=`mp4a'
main debug: looking for decoder module matching "any": 39 candidates
main debug: using meta fetcher module "lua"
main debug: removing module "lua"
main debug: searching art for Diffusion
main debug: looking for art finder module matching "any": 2 candidates
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
main debug: Buffering 29%
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
lua debug: Trying Lua scripts in C:\Documents and Settings\User\Application Data\vlc\lua\meta\art
lua debug: Trying Lua scripts in C:\Program Files\VideoLAN\VLC\lua\meta\art
lua debug: Trying Lua playlist script C:\Program Files\VideoLAN\VLC\lua\meta\art\00_musicbrainz.luac
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
lua debug: Trying Lua playlist script C:\Program Files\VideoLAN\VLC\lua\meta\art\01_googleimage.luac
main debug: using decoder module "a52"
main debug: Buffering 59%
main debug: looking for encoder module matching "any": 17 candidates
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
lua debug: Trying Lua playlist script C:\Program Files\VideoLAN\VLC\lua\meta\art\02_frenchtv.luac
main debug: Buffering 89%
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
avcodec debug: Trying to find more suitable sample format instead of fltp
avcodec debug: Trying to find packet sample format instead of planar fltp
avcodec debug: Ended up using fltp as sample format
avcodec error: cannot open encoder
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
lua debug: Trying Lua playlist script C:\Program Files\VideoLAN\VLC\lua\meta\art\03_lastfm.luac
main debug: Stream buffering done (359 ms in 41 ms)
main debug: no art finder modules matched
main debug: art not found for Diffusion
main debug: no encoder modules matched
stream_out_transcode error: cannot find audio encoder (module:any fourcc:mp4a). Take a look few lines earlier to see possible reason.
main debug: removing module "a52"
stream_out_transcode error: cannot create audio chain
main error: cannot create packetizer output (a52 )
main debug: Decoder buffering done in 5 ms
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 debug: found NAL_SPS (sps_id=0)
packetizer_h264 debug: Seen SEI recovery point, 0 recovery frames
packetizer_h264 debug: Recovery from SEI recovery point complete
main debug: adding a new sout input (sout_input:03b74e40)
stream_out_transcode debug: not transcoding a stream (fcc=`h264')
main debug: adding a new input
mux_avi debug: adding input
main warning: trying to send non-dated packet to stream output!
mux_avi debug: writing header
main warning: trying to send non-dated packet to stream output!
(... repeated 2794 times....)
ts debug: eof ?
main debug: EOF reached
main debug: waiting decoder fifos to empty
main warning: trying to send non-dated packet to stream output!
main warning: trying to send non-dated packet to stream output!
main warning: trying to send non-dated packet to stream output!
main warning: trying to send non-dated packet to stream output!
main warning: trying to send non-dated packet to stream output!
main warning: trying to send non-dated packet to stream output!
main warning: trying to send non-dated packet to stream output!
main warning: trying to send non-dated packet to stream output!
main warning: trying to send non-dated packet to stream output!
main warning: trying to send non-dated packet to stream output!
main debug: finished input
main debug: removing module "packetizer_h264"
main debug: killing decoder fourcc `h264', 0 PES in FIFO
main debug: removing a sout input (sout_input:03b74e40)
mux_avi debug: removing input
main warning: no more input streams for this mux
main debug: removing module "a52"
main debug: killing decoder fourcc `a52 ', 0 PES in FIFO
main debug: removing module "ts"
ts debug: pid list:
ts debug: - pid[0] seen
ts debug: - pid[31] seen
ts debug: - pid[256] seen
ts debug: - pid[4097] seen
ts debug: - pid[4113] seen
ts debug: - pid[4352] seen
main debug: Program doesn't contain anymore ES
ts debug: - pid[4608] seen
ts debug: - pid[8191] seen
main debug: removing module "record"
main debug: removing module "filesystem"
main debug: dead input
main debug: destroying useless sout
main debug: destroying chain... (name=transcode)
main debug: removing module "stream_out_transcode"
main debug: destroying chain done
main debug: destroying chain... (name=std)
main debug: removing module "stream_out_standard"
main debug: removing module "mux_avi"
mux_avi debug: AVI muxer closed
mux_avi info: stream[0] duration:112 totalsize:161695609 frames:2808 fps:24.902449 KiB/s:11202
main debug: removing module "access_output_file"
access_output_file debug: file access output closed
main debug: destroying chain done
main debug: changing item without a request (current 0/1)
main debug: nothing to play
qt4 debug: IM: Deleting the input
qt4 debug: MRL passed to the Sout: file:///M:/Mes%20Documents/Mes%20vid%C3%A9os/Guitare2014/00012.MTS
Friendly
JP
main warning: trying to send non-dated packet to stream output! (3000 times)
The full log file is :
(on windows XP)
qt4 debug: MRL passed to the Sout: file:///M:/Mes%20Documents/Mes%20vid%C3%A9os/Guitare2014/00012.MTS
qt4 debug: Transcode MRL: sout=#transcode{acodec=mp4a,ab=192,channels=2,samplerate=48000,scodec=dvbs}:std{access=file{no-overwrite},mux=avi,dst='M:\Mes Documents\Mes vidéos\Guitare2014\0012.avi'}
qt4 debug: Adding option: file-caching=300
qt4 debug: Adding option: sout=#transcode{acodec=mp4a,ab=192,channels=2,samplerate=48000,scodec=dvbs}:std{access=file{no-overwrite},mux=avi,dst='M:\Mes Documents\Mes vidéos\Guitare2014\0012.avi'}
main debug: adding item `Diffusion' ( file:///M:/Mes%20Documents/Mes%20vid%C3%A9os/Guitare2014/00012.MTS )
qt4 debug: Adding a new MRL to recent ones: file:///M:/Mes%20Documents/Mes%20vid%C3%A9os/Guitare2014/00012.MTS
main debug: processing request item: Diffusion, node: null, skip: 0
main debug: rebuilding array of current - root Liste de lecture
main debug: rebuild done - 1 items, index 0
main debug: starting playback of the new playlist item
main debug: resyncing on Diffusion
main debug: Diffusion is at 0
main debug: creating new input thread
main debug: Creating an input for 'Diffusion'
main debug: using sout chain=`transcode{acodec=mp4a,ab=192,channels=2,samplerate=48000,scodec=dvbs}:std{access=file{no-overwrite},mux=avi,dst='M:\Mes Documents\Mes vidéos\Guitare2014\0012.avi'}'
main debug: stream=`std'
main debug: looking for sout stream module matching "std": 21 candidates
main debug: set config option: sout-standard-access to file{no-overwrite}
main debug: set config option: sout-standard-mux to avi
main debug: set config option: sout-standard-dst to M:\Mes Documents\Mes vidéos\Guitare2014\0012.avi
main debug: looking for sout access module matching "file": 8 candidates
main debug: Creating an input for 'Diffusion'
main debug: set config option: sout-file-overwrite to (null)
access_output_file debug: file access output opened (M:\Mes Documents\Mes vidéos\Guitare2014\0012.avi)
main debug: using sout access module "access_output_file"
main debug: looking for sout mux module matching "avi": 10 candidates
mux_avi debug: AVI muxer opened
main debug: using sout mux module "mux_avi"
stream_out_standard debug: using `file{no-overwrite}/avi://M:\Mes Documents\Mes vidéos\Guitare2014\0012.avi'
main debug: using sout stream module "stream_out_standard"
main debug: stream=`transcode'
main debug: looking for sout stream module matching "transcode": 21 candidates
main debug: set config option: sout-transcode-acodec to mp4a
main debug: set config option: sout-transcode-ab to 192
main debug: set config option: sout-transcode-channels to 2
main debug: set config option: sout-transcode-samplerate to 48000
main debug: set config option: sout-transcode-scodec to dvbs
stream_out_transcode debug: codec audio=mp4a 48000Hz 2 channels 192Kb/s
stream_out_transcode debug: codec spu=dvbs
main debug: using sout stream module "stream_out_transcode"
main debug: using timeshift granularity of 50 MiB, in path 'C:\DOCUME~1\User\LOCALS~1\Temp'
main debug: `file:///M:/Mes%20Documents/Mes%20vid%C3%A9os/Guitare2014/00012.MTS' gives access `file' demux `' path `/M:/Mes%20Documents/Mes%20vid%C3%A9os/Guitare2014/00012.MTS'
main debug: creating demux: access='file' demux='' location='/M:/Mes%20Documents/Mes%20vid%C3%A9os/Guitare2014/00012.MTS' file='M:\Mes Documents\Mes vidéos\Guitare2014\00012.MTS'
main debug: looking for access_demux module matching "file": 12 candidates
main debug: no access_demux modules matched
main debug: creating access 'file' location='/M:/Mes%20Documents/Mes%20vid%C3%A9os/Guitare2014/00012.MTS', path='M:\Mes Documents\Mes vidéos\Guitare2014\00012.MTS'
main debug: looking for access module matching "file": 20 candidates
filesystem debug: opening file `M:\Mes Documents\Mes vidéos\Guitare2014\00012.MTS'
main debug: using access module "filesystem"
main debug: Using stream method for AStream*
main debug: starting pre-buffering
main debug: received first data after 0 ms
main debug: pre-buffering done 1024 bytes in 0s - 1000000 KiB/s
main debug: looking for stream_filter module matching "any": 6 candidates
main debug: no stream_filter modules matched
main debug: looking for stream_filter module matching "record": 6 candidates
main debug: using stream_filter module "record"
main debug: creating demux: access='file' demux='' location='/M:/Mes%20Documents/Mes%20vid%C3%A9os/Guitare2014/00012.MTS' file='M:\Mes Documents\Mes vidéos\Guitare2014\00012.MTS'
main debug: looking for demux module matching "any": 63 candidates
qt4 debug: IM: Setting an input
mod debug: MOD validation failed (ext=MTS)
ts warning: lost synchro
ts debug: skipping 4 bytes of garbage
ts warning: lost synchro
ts debug: skipping 81 bytes of garbage
ts warning: lost synchro
ts debug: skipping 158 bytes of garbage
ts warning: lost synchro
ts debug: skipping 43 bytes of garbage
ts warning: lost synchro
ts debug: skipping 120 bytes of garbage
ts warning: lost synchro
ts debug: skipping 5 bytes of garbage
ts warning: lost synchro
ts debug: skipping 82 bytes of garbage
ts warning: lost synchro
ts debug: skipping 159 bytes of garbage
ts warning: lost synchro
ts debug: skipping 44 bytes of garbage
ts warning: lost synchro
ts debug: skipping 121 bytes of garbage
ts warning: lost synchro
ts debug: skipping 4 bytes of garbage
ts warning: lost synchro
ts debug: skipping 4 bytes of garbage
ts debug: pid[256] unknown
ts debug: pid[31] unknown
ts debug: pid[4097] unknown
ts debug: pid[4113] unknown
ts debug: pid[4352] unknown
ts debug: PATCallBack called
ts debug: new PAT ts_id=0 version=0 current_next=1
ts debug: * number=0 pid=31
ts debug: * number=1 pid=256
ts debug: PMTCallBack called
ts debug: new PMT program number=1 version=0 pid_pcr=4097
ts debug: * descriptor : registration HDMV
ts debug: * descriptor : unknown (0x88)
ts debug: * es pid=4113 type=27 dr->i_tag=0x5
ts debug: * es pid=4113 type=27 fcc=h264
main debug: selecting program id=1
ts debug: * es pid=4352 type=129 dr->i_tag=0x5
ts debug: * es pid=4352 type=129 dr->i_tag=0x81
ts debug: * es pid=4352 type=129 fcc=a52
ts debug: * es pid=4608 type=144 fcc=bdpg
filesystem warning: unimplemented query 4097 in control
main debug: using demux module "ts"
main debug: looking for a subtitle file in M:\Mes Documents\Mes vidéos\Guitare2014\
main debug: looking for packetizer module matching "any": 21 candidates
main debug: using packetizer module "packetizer_h264"
main debug: looking for packetizer module matching "any": 21 candidates
main debug: using packetizer module "a52"
main debug: meta ok for (null), need to fetch art
ts debug: DEMUX_SET_GROUP 0 00000000
main debug: starting in sync mode
main debug: looking for meta reader module matching "any": 2 candidates
lua debug: Trying Lua scripts in C:\Documents and Settings\User\Application Data\vlc\lua\meta\reader
lua debug: Trying Lua scripts in C:\Program Files\VideoLAN\VLC\lua\meta\reader
lua debug: Trying Lua playlist script C:\Program Files\VideoLAN\VLC\lua\meta\reader\filename.luac
main debug: no meta reader modules matched
main debug: `file:///M:/Mes%20Documents/Mes%20vid%C3%A9os/Guitare2014/00012.MTS' successfully opened
ts warning: first packet for pid=4113 cc=0x4
main debug: Buffering 0%
ts warning: first packet for pid=4352 cc=0x4
main debug: looking for meta fetcher module matching "any": 1 candidates
lua debug: Trying Lua scripts in C:\Documents and Settings\User\Application Data\vlc\lua\meta\fetcher
lua debug: Trying Lua scripts in C:\Program Files\VideoLAN\VLC\lua\meta\fetcher
main debug: switching to async mode
packetizer_h264 debug: found NAL_PPS (pps_id=0 sps_id=0)
packetizer_h264 warning: waiting for SPS/PPS
lua debug: Trying Lua playlist script C:\Program Files\VideoLAN\VLC\lua\meta\fetcher\tvrage.luac
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
a52 debug: A/52 channels:6 samplerate:48000 bitrate:448000
main debug: adding a new sout input (sout_input:027e7b88)
stream_out_transcode debug: creating audio transcoding from fcc=`a52 ' to fcc=`mp4a'
main debug: looking for decoder module matching "any": 39 candidates
main debug: using meta fetcher module "lua"
main debug: removing module "lua"
main debug: searching art for Diffusion
main debug: looking for art finder module matching "any": 2 candidates
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
main debug: Buffering 29%
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
lua debug: Trying Lua scripts in C:\Documents and Settings\User\Application Data\vlc\lua\meta\art
lua debug: Trying Lua scripts in C:\Program Files\VideoLAN\VLC\lua\meta\art
lua debug: Trying Lua playlist script C:\Program Files\VideoLAN\VLC\lua\meta\art\00_musicbrainz.luac
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
lua debug: Trying Lua playlist script C:\Program Files\VideoLAN\VLC\lua\meta\art\01_googleimage.luac
main debug: using decoder module "a52"
main debug: Buffering 59%
main debug: looking for encoder module matching "any": 17 candidates
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
lua debug: Trying Lua playlist script C:\Program Files\VideoLAN\VLC\lua\meta\art\02_frenchtv.luac
main debug: Buffering 89%
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
avcodec debug: Trying to find more suitable sample format instead of fltp
avcodec debug: Trying to find packet sample format instead of planar fltp
avcodec debug: Ended up using fltp as sample format
avcodec error: cannot open encoder
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 warning: waiting for SPS/PPS
lua debug: Trying Lua playlist script C:\Program Files\VideoLAN\VLC\lua\meta\art\03_lastfm.luac
main debug: Stream buffering done (359 ms in 41 ms)
main debug: no art finder modules matched
main debug: art not found for Diffusion
main debug: no encoder modules matched
stream_out_transcode error: cannot find audio encoder (module:any fourcc:mp4a). Take a look few lines earlier to see possible reason.
main debug: removing module "a52"
stream_out_transcode error: cannot create audio chain
main error: cannot create packetizer output (a52 )
main debug: Decoder buffering done in 5 ms
packetizer_h264 warning: waiting for SPS/PPS
packetizer_h264 debug: found NAL_SPS (sps_id=0)
packetizer_h264 debug: Seen SEI recovery point, 0 recovery frames
packetizer_h264 debug: Recovery from SEI recovery point complete
main debug: adding a new sout input (sout_input:03b74e40)
stream_out_transcode debug: not transcoding a stream (fcc=`h264')
main debug: adding a new input
mux_avi debug: adding input
main warning: trying to send non-dated packet to stream output!
mux_avi debug: writing header
main warning: trying to send non-dated packet to stream output!
(... repeated 2794 times....)
ts debug: eof ?
main debug: EOF reached
main debug: waiting decoder fifos to empty
main warning: trying to send non-dated packet to stream output!
main warning: trying to send non-dated packet to stream output!
main warning: trying to send non-dated packet to stream output!
main warning: trying to send non-dated packet to stream output!
main warning: trying to send non-dated packet to stream output!
main warning: trying to send non-dated packet to stream output!
main warning: trying to send non-dated packet to stream output!
main warning: trying to send non-dated packet to stream output!
main warning: trying to send non-dated packet to stream output!
main warning: trying to send non-dated packet to stream output!
main debug: finished input
main debug: removing module "packetizer_h264"
main debug: killing decoder fourcc `h264', 0 PES in FIFO
main debug: removing a sout input (sout_input:03b74e40)
mux_avi debug: removing input
main warning: no more input streams for this mux
main debug: removing module "a52"
main debug: killing decoder fourcc `a52 ', 0 PES in FIFO
main debug: removing module "ts"
ts debug: pid list:
ts debug: - pid[0] seen
ts debug: - pid[31] seen
ts debug: - pid[256] seen
ts debug: - pid[4097] seen
ts debug: - pid[4113] seen
ts debug: - pid[4352] seen
main debug: Program doesn't contain anymore ES
ts debug: - pid[4608] seen
ts debug: - pid[8191] seen
main debug: removing module "record"
main debug: removing module "filesystem"
main debug: dead input
main debug: destroying useless sout
main debug: destroying chain... (name=transcode)
main debug: removing module "stream_out_transcode"
main debug: destroying chain done
main debug: destroying chain... (name=std)
main debug: removing module "stream_out_standard"
main debug: removing module "mux_avi"
mux_avi debug: AVI muxer closed
mux_avi info: stream[0] duration:112 totalsize:161695609 frames:2808 fps:24.902449 KiB/s:11202
main debug: removing module "access_output_file"
access_output_file debug: file access output closed
main debug: destroying chain done
main debug: changing item without a request (current 0/1)
main debug: nothing to play
qt4 debug: IM: Deleting the input
qt4 debug: MRL passed to the Sout: file:///M:/Mes%20Documents/Mes%20vid%C3%A9os/Guitare2014/00012.MTS
Friendly
JP
Re: VLC 2.1 convert/save not working
2.1.3 same problem, can only convert to *.raw regardless of input type entered or output type chosen.... reloading 2.0.8 again
Re: VLC 2.1 convert/save not working
I ended up here after searching for a solution to the same problem. (btw, do people really use a command line interface with VLC? I mean, if that works for you, great, but you expect us to revert to that because a feature is broken? - /endrant)
SPOILER: I got it to work. But its buggy, and there doesn't seem to be a way to process a batch of files.
I've been using VLC for about 10 years. Subtle (and not so subtle) changes to the functionality and the interface throw me now and again, so I, at first, chalked this problem up to that, but it was worse. Your mileage may be similar.
Condition: attempting to convert flac (and MP4) to mp3 - no MP3 output option could be invoked.
Symptoms: as the above posters, I was unable to get the save/convert function to output to MP3 when attempting a file conversion, but with some minor difference(s). specifically, I could obtain a conversion, but only to MP4s. While MP3 was listed in a couple of profiles, selecting those profiles either would only produce MP4's or .MPEG-TS. I couldn't' find, or force it to convert to MP3.
Additionally - creating, editing, or copy/modifying a conversion profile to convert to MP3 would not work. In all cases, it defaulted to a TS conversion, even if I specified the proper extension during the profile creation. I also attempted to convert to MP4 (getting rather desperate), which seemed to work - if you wanted an audio only MP4 (which wouldn't work in WMP). The issue seemed to be that there was no selection for MP3 audio in the video section which is the first screen you encounter during save/convert session. There was no way to "unselect" the radio button - so it appeared to be stuck giving you a MP4 or whatever it was set at, even though I had un-selected all options on the video tab, and had specified MP3 conversion on the audio tab. General context of how I got to that point - whether with no playlist, or with a series, or even selecting the source file from the playlist - none of anything I could think to do would invoke an MP3 output - period.
So...
I updated to the latest ver from one just a couple months older. No joy.
I reinstalled. Same - no joy.
I uninstalled completely, then reinstalled after confirming no settings remained in the VLC program folder. At this point, after installing again "new", the option to save/convert to an output for MP3 appeared, and after testing on several conversions, it is working! Mostly.
I had one failure to work with the same symptoms as before the reinstall: it reverted to trying to save as a .TS. I discovered that it would exhibit this issue if I was trying to convert a file in the playlist by right clicking and save/convert through the context menu there. (yeah, I'm thinking, "oh crap, it's broke again"). But if I invoke save/convert from the main media pull down menu, it works and MP3s are again available. It was the same symptom I'd first seen - no MP3 choice as a destination in the drop-down, and the radio button on the opening page was already selected and there appears to be no "unselect" option for that button. I also played with the way that "worked", where, from the root media drop down, I invoke and got this same page but without a radio button pre-selected on opening. If I select a button at this point, you cannot unselected it, and the resulting output seems to be stuck on whatever video format that's there. (I figured I was taking a chance and from then on, a selection would be present on opening that page no matter how it was invoked, but thankfully, accessing save/convert from the root media drop down and the MP3 option was back. There's probably a context issue with the menus that won't allow an MP3 convert option if...???... my testing wasn't so exhaustive to discover what the anomaly (or programming condition) actually is, but it's damn confusing as the exactly when or why it does this.
SECONDARY ISSUE
On another note, that may or may not be related... The ability to conduct a batch operation of converting several files at once or from the playlist seems broken as well. In ALL cases attempted, it always prompts for an out-going file name, and I could not find a way through any convention I'm familiar with to coax a batch conversion process - whether loading a folder, or compiling a list of files in the playlist and trying to convert all - it always needs the filename populated manually - it only processes one file at a time. It strikes me these two issues may be related.
While the first issue (no MP3 output format) seems to be dependant on the context of where you are in the program, or how you get there (context), I could not determine that the second issue (no batch operation) would work at all. Sure, I may be missing the "context" that makes it work, but hey, what's the point of making menu options and the functions they invoke available if you really have to get there from a different screen or operation to begin with. I'm inclinded to think, rather strongly, that this is an error and not the intent of the authors.
Just to be absolutely clear here - when I've stated above that I got it to work, it was from the main menu "MEDIA" drop down, I mean, specifically, that this is the starting point which invoked got me to the operation that worked. So... "MEDIA" (dropdown), "convert/save", "Open Media" dialog box opens, "add" a source file, "convert/save", "Convert" dialog opens up, select "audio MP3" from the drop down, confirm destination path and manually type in a filename, hit "start", and you're off.
Wow, that's a heck of a lot of steps, not to mention the default path opens every time, and you have to manually type (or at least paste) in a filename for output,
Ok, after writing that (and experiencing the stuff before that), I cannot make it fail. It pulls up the conversion for MP3 every time now. I can't find a situation/context where it won't give me an MP3 output option after starting a conversion from - anywhere. I can't even replicate the failures I had AFTER reinstalling. Well, considering how many steps it takes to get to a file converted an MP3 and there seems to be no batch function, it's probably time to find another app. it's a pity, I love VLC (otherwise).
FINAL Observations: While is seems possible, if not likely, that my app had some corruption or error with respect to the context (I can't see anything in the version changelogs that would directly affect these issues), It seems like there some more work to do to hammer out the conversion functionality.
PS: Wow, that's a long post. Sorry for the length. Aside from my wordiness, I wanted to document this issue as I found it, for both those looking to make it work, and those who might be interested in fixing it. 'hope it helps some.
SPOILER: I got it to work. But its buggy, and there doesn't seem to be a way to process a batch of files.
I've been using VLC for about 10 years. Subtle (and not so subtle) changes to the functionality and the interface throw me now and again, so I, at first, chalked this problem up to that, but it was worse. Your mileage may be similar.
Condition: attempting to convert flac (and MP4) to mp3 - no MP3 output option could be invoked.
Symptoms: as the above posters, I was unable to get the save/convert function to output to MP3 when attempting a file conversion, but with some minor difference(s). specifically, I could obtain a conversion, but only to MP4s. While MP3 was listed in a couple of profiles, selecting those profiles either would only produce MP4's or .MPEG-TS. I couldn't' find, or force it to convert to MP3.
Additionally - creating, editing, or copy/modifying a conversion profile to convert to MP3 would not work. In all cases, it defaulted to a TS conversion, even if I specified the proper extension during the profile creation. I also attempted to convert to MP4 (getting rather desperate), which seemed to work - if you wanted an audio only MP4 (which wouldn't work in WMP). The issue seemed to be that there was no selection for MP3 audio in the video section which is the first screen you encounter during save/convert session. There was no way to "unselect" the radio button - so it appeared to be stuck giving you a MP4 or whatever it was set at, even though I had un-selected all options on the video tab, and had specified MP3 conversion on the audio tab. General context of how I got to that point - whether with no playlist, or with a series, or even selecting the source file from the playlist - none of anything I could think to do would invoke an MP3 output - period.
So...
I updated to the latest ver from one just a couple months older. No joy.
I reinstalled. Same - no joy.
I uninstalled completely, then reinstalled after confirming no settings remained in the VLC program folder. At this point, after installing again "new", the option to save/convert to an output for MP3 appeared, and after testing on several conversions, it is working! Mostly.
I had one failure to work with the same symptoms as before the reinstall: it reverted to trying to save as a .TS. I discovered that it would exhibit this issue if I was trying to convert a file in the playlist by right clicking and save/convert through the context menu there. (yeah, I'm thinking, "oh crap, it's broke again"). But if I invoke save/convert from the main media pull down menu, it works and MP3s are again available. It was the same symptom I'd first seen - no MP3 choice as a destination in the drop-down, and the radio button on the opening page was already selected and there appears to be no "unselect" option for that button. I also played with the way that "worked", where, from the root media drop down, I invoke and got this same page but without a radio button pre-selected on opening. If I select a button at this point, you cannot unselected it, and the resulting output seems to be stuck on whatever video format that's there. (I figured I was taking a chance and from then on, a selection would be present on opening that page no matter how it was invoked, but thankfully, accessing save/convert from the root media drop down and the MP3 option was back. There's probably a context issue with the menus that won't allow an MP3 convert option if...???... my testing wasn't so exhaustive to discover what the anomaly (or programming condition) actually is, but it's damn confusing as the exactly when or why it does this.
SECONDARY ISSUE
On another note, that may or may not be related... The ability to conduct a batch operation of converting several files at once or from the playlist seems broken as well. In ALL cases attempted, it always prompts for an out-going file name, and I could not find a way through any convention I'm familiar with to coax a batch conversion process - whether loading a folder, or compiling a list of files in the playlist and trying to convert all - it always needs the filename populated manually - it only processes one file at a time. It strikes me these two issues may be related.
While the first issue (no MP3 output format) seems to be dependant on the context of where you are in the program, or how you get there (context), I could not determine that the second issue (no batch operation) would work at all. Sure, I may be missing the "context" that makes it work, but hey, what's the point of making menu options and the functions they invoke available if you really have to get there from a different screen or operation to begin with. I'm inclinded to think, rather strongly, that this is an error and not the intent of the authors.
Just to be absolutely clear here - when I've stated above that I got it to work, it was from the main menu "MEDIA" drop down, I mean, specifically, that this is the starting point which invoked got me to the operation that worked. So... "MEDIA" (dropdown), "convert/save", "Open Media" dialog box opens, "add" a source file, "convert/save", "Convert" dialog opens up, select "audio MP3" from the drop down, confirm destination path and manually type in a filename, hit "start", and you're off.
Wow, that's a heck of a lot of steps, not to mention the default path opens every time, and you have to manually type (or at least paste) in a filename for output,
Ok, after writing that (and experiencing the stuff before that), I cannot make it fail. It pulls up the conversion for MP3 every time now. I can't find a situation/context where it won't give me an MP3 output option after starting a conversion from - anywhere. I can't even replicate the failures I had AFTER reinstalling. Well, considering how many steps it takes to get to a file converted an MP3 and there seems to be no batch function, it's probably time to find another app. it's a pity, I love VLC (otherwise).
FINAL Observations: While is seems possible, if not likely, that my app had some corruption or error with respect to the context (I can't see anything in the version changelogs that would directly affect these issues), It seems like there some more work to do to hammer out the conversion functionality.
PS: Wow, that's a long post. Sorry for the length. Aside from my wordiness, I wanted to document this issue as I found it, for both those looking to make it work, and those who might be interested in fixing it. 'hope it helps some.
-
Jean-Baptiste Kempf
- Site Administrator
- Posts: 37519
- Joined: 22 Jul 2005 15:29
- VLC version: 4.0.0-git
- Operating System: Linux, Windows, Mac
- Location: Cone, France
- Contact:
Re: VLC 2.1 convert/save not working
Try 2.2.0 it should be better.
Jean-Baptiste Kempf
http://www.jbkempf.com/ - http://www.jbkempf.com/blog/category/Videolan
VLC media player developer, VideoLAN President and Sites administrator
If you want an answer to your question, just be specific and precise. Don't use Private Messages.
http://www.jbkempf.com/ - http://www.jbkempf.com/blog/category/Videolan
VLC media player developer, VideoLAN President and Sites administrator
If you want an answer to your question, just be specific and precise. Don't use Private Messages.
Re: VLC 2.1 convert/save not working
Better? You mean the batch conversion works?
'could you elaborate some?
- It looks like the version above, 2.1.3 is mostly working as long as you don't try using batch process/conversion.
- where's 2.2.0 hiding? latest ver on all download links I could find is still 2.1.3. (we're talking Windows ver here, right?)
thanks JBK
'could you elaborate some?
- It looks like the version above, 2.1.3 is mostly working as long as you don't try using batch process/conversion.
- where's 2.2.0 hiding? latest ver on all download links I could find is still 2.1.3. (we're talking Windows ver here, right?)
thanks JBK
Re: VLC 2.1 convert/save not working SOLVED
I had the convert/save not working after VLC 2.0.8 on win7 x64. After reading this thread, I found that when Tools>Messages>Verbosity is set to 1, convert/save works.
The work-around is set verbosity to 1. To do this automatically, each time VLC is started, add --verbose=1 to the command line. I did it in a shortcut. This is my command line: "C:\Program Files\VideoLAN\VLC\vlc.exe" --verbose=1
I also tried deleting %AppData% VLC and the Start>All Programs>VLC>...reset settings, but the dependable work-around is verbose=1. The convert/save failure did not produce an error message. It seems that verbose=1 may introduce a delay in execution?
Many thanks to the VLC team for the nice work!
The work-around is set verbosity to 1. To do this automatically, each time VLC is started, add --verbose=1 to the command line. I did it in a shortcut. This is my command line: "C:\Program Files\VideoLAN\VLC\vlc.exe" --verbose=1
I also tried deleting %AppData% VLC and the Start>All Programs>VLC>...reset settings, but the dependable work-around is verbose=1. The convert/save failure did not produce an error message. It seems that verbose=1 may introduce a delay in execution?
Many thanks to the VLC team for the nice work!
Re: VLC 2.1 convert/save not working
Hi I tried the Verbosity fix it didn't work for me. I'm trying to convert amr to mp3 on Windows xp.
Any other tips?
Any other tips?
Re: VLC 2.1 convert/save not working
Just tried to Update to 2.1.3 again (from vlc help menu), converter seems to work now (4 successful tests so far) it even shows the right container/extension when saving the file type instead of locking it into *.RAW. I'm confused as to why it's working now when it didn't a few months ago... aside from Windows updates, I've made no major changes to my system between the 2 attempts at getting 2.1.3 to convert
Re: VLC 2.1 convert/save not working
I'm noticing that because the new interface forces the file extension on the convert/save, there is ABSOLUTELY NO WAY to convert to a proper audio format. All of the audio converters are encapsulated as RAW except mp3 (mp4) which forces .mp4 This worked fine in 2.0.8 since you could manually type in your own file extension but in 2.1.3 it dumps out everything as RAW or MP4 which cannot be read by anything but vlc (including programs like Audacity that read raw) in order to get an audio conversion to mp3 I had to covert using .WAV encapsulation and then use Audacity to export as .mp3
-
kodela
- Big Cone-huna
- Posts: 632
- Joined: 25 Sep 2012 19:40
- VLC version: 2.2.4
- Operating System: Windows 10
- Location: Germany
Re: VLC 2.1 convert/save not working
With the correct profile settings will be converted to MP3 or other audio formats.
As an extension 'RAW' is used.
Here is an excerpt from MediaInfo for a converted MP4 to MP3 file:
You just have to rename the converted files to MP3.
As an extension 'RAW' is used.
Here is an excerpt from MediaInfo for a converted MP4 to MP3 file:
Code: Select all
Allgemein
Vollständiger Name : D:\VLC\Test.raw
Format : MPEG Audio
Dateigröße : 8,17 MiB
Dauer : 8min 55s
Modus der Gesamtbitrate : konstant
Gesamte Bitrate : 128 Kbps
verwendete Encoder-Bibliothek : LAME3.99.5
Audio
Format : MPEG Audio
Format-Version : Version 1
Format-Profil : Layer 3
Format_Settings_Mode : Joint stereo
Dauer : 8min 56s
Bitraten-Modus : konstant
Bitrate : 128 Kbps
Kanäle : 2 Kanäle
Samplingrate : 44,1 KHz
Stream-Größe : 8,17 MiB (100%)
verwendete Encoder-Bibliothek : LAME3.99.5
-
TedHanwell
- New Cone
- Posts: 1
- Joined: 27 May 2014 01:35
- VLC version: 2.1.3
- Operating System: Windows
Re: VLC 2.1 convert/save not working
Hi
Are there newer posts on this subject? Is there a solution?
I'm trying to convert .MTS to .MP4. I'm using ver 2.1.3.
I've seen that someone else gets a 1.2kb file which is not playable. I have tried setting Verbosity to 1 or 2, but no log is created.
Please help if possible... thanks.
Are there newer posts on this subject? Is there a solution?
I'm trying to convert .MTS to .MP4. I'm using ver 2.1.3.
I've seen that someone else gets a 1.2kb file which is not playable. I have tried setting Verbosity to 1 or 2, but no log is created.
Please help if possible... thanks.
Return to “VLC media player for Windows Troubleshooting”
Who is online
Users browsing this forum: Chris N and 11 guests