Passthrough SPDIF not working

[Jemborg]

It still doesn't work like it should.
I get it working with some tweaking for most video. You have to tick "use spdif when available", choose the correct output module (which simply was win32 waveout), fiddled around some with directx and waveout, set it all to my audio interface having the receiver connected through spdif, and then thought I had it working. Until I launched a bluray and didn't get it to work at all.
I use Win 7 x64 , Echo Gina3g audio interface connected to my Onkyo receiver through a fibre optic cable. Which used to work fine, and still works fine in 2.0.8 ,but doesn't after that version.
Any dev any insight on this?

You had 2.0.8 playing bluray disks/isos?

I used to have to use a different program for that so that's news to me. Do you need AnyDVD HD for it to work?

[hurius]

2.1.2 not fixed yet

[MiltJR111]

This isn't working for me on 2.1.2 either. I can literally play the video in 2.1.2, and I don't get Dolby Digital output, and then roll back to 2.0.8 and play the same file, and it immediately works. I don't believe I should have to do any additional tweaking when on 2.0.8 it just works. Hopefully this gets worked out soon, but in the meantime, I guess I'll be sticking with 2.0.8.

[Jemborg]

This isn't working for me on 2.1.2 either. I can literally play the video in 2.1.2, and I don't get Dolby Digital output, and then roll back to 2.0.8 and play the same file, and it immediately works. I don't believe I should have to do any additional tweaking when on 2.0.8 it just works. Hopefully this gets worked out soon, but in the meantime, I guess I'll be sticking with 2.0.8.

Just curious. Did you try ticking the relevant box under advanced>audio?

[tobisama]

Hey, I just realized about this problem, I like to see movies on my pc with 2 frontal and two back speakers, so I like to change between stereo and 4.0 (for music or movies), why was this option removed?... this option was one of my favorites, it's a shame...it's going to be fixed soon?...... in the meantime .....downgrade to 2.0.8 and everything is working again....

This always happens with the software, sooner or later a crucial option is removed ....and the search for another application starts......

[Ludrax]

I like to see movies on my pc with 2 frontal and two back speakers, so I like to change between stereo and 4.0 (for music or movies), why was this option removed?... this option was one of my favorites, it's a shame...it's going to be fixed soon?

Audio Device on VLC 2.0.8 and 2.1.0

[MiltJR111]

This isn't working for me on 2.1.2 either. I can literally play the video in 2.1.2, and I don't get Dolby Digital output, and then roll back to 2.0.8 and play the same file, and it immediately works. I don't believe I should have to do any additional tweaking when on 2.0.8 it just works. Hopefully this gets worked out soon, but in the meantime, I guess I'll be sticking with 2.0.8.

Just curious. Did you try ticking the relevant box under advanced>audio?

I've always had that box checked.

[Jemborg]

This isn't working for me on 2.1.2 either. I can literally play the video in 2.1.2, and I don't get Dolby Digital output, and then roll back to 2.0.8 and play the same file, and it immediately works. I don't believe I should have to do any additional tweaking when on 2.0.8 it just works. Hopefully this gets worked out soon, but in the meantime, I guess I'll be sticking with 2.0.8.

Just curious. Did you try ticking the relevant box under advanced>audio?

I've always had that box checked.

No worries.

Why the heck did they change it... was it pressure from the MPAA or some such? I can't get a a straight answer.

[InterClaw]

Well, it started working for me again in 2.1.2, so maybe it's different for different hardware.

[MiltJR111]

Well, it started working for me again in 2.1.2, so maybe it's different for different hardware.

I did figure out how to get it working, finally, but it took changing the DirectX audio settings, which was never necessary before. But since the newest version supports x265-encoded files, I'm glad I figured out a way to get it working, even though it causes some audio delay at the beginning of files.

[Jemborg]

Well, it started working for me again in 2.1.2, so maybe it's different for different hardware.

I did figure out how to get it working, finally, but it took changing the DirectX audio settings, which was never necessary before. But since the newest version supports x265-encoded files, I'm glad I figured out a way to get it working, even though it causes some audio delay at the beginning of files.

I've never had to change any DirectX settings, only repair it. What did you have to do... it might be important to someone else?

EDIT: Did you just select HDMI Digital Out or SPDIF as the system audio default?

[MiltJR111]

Well, it started working for me again in 2.1.2, so maybe it's different for different hardware.

I did figure out how to get it working, finally, but it took changing the DirectX audio settings, which was never necessary before. But since the newest version supports x265-encoded files, I'm glad I figured out a way to get it working, even though it causes some audio delay at the beginning of files.

I've never had to change any DirectX settings, only repair it. What did you have to do... it might be important to someone else?

EDIT: Did you just select HDMI Digital Out or SPDIF as the system audio default?

My system uses Optical Out as the system default audio device. I selected that audio device in the DirectX settings in VLC and set the output to Stereo. I have since gone back and changed the device to "Default" in the DirectX settings, and it does appear to still be working. But I have noticed that I miss half a second to a second of audio at the beginning of my audio files when playing them now.

[Jean-Baptiste Kempf]

It should be done in 2.1.3

[maxscience]

Doesn't work with latest OS X on HDMI passthrough, DTS surround and VLC 2.1.3

[rocketskunk]

It should be done in 2.1.3

Hi

I have upgraded to 2.1.3 and I still cannot get DTS or 5.1 to work. Whenever I pass through VLC stops working and windows closes it.

Really frustrated with this, I have been using VLC for many years without an issue. Do you have any ideas what is happening here.

I am using a ASUS DGX soundcard connected to Yamaha RX-V620RDSAV receiver via optical.

No mater how much I fiddle it just won't work.

The most frustrating thing is I rolled back to 2.0.8 but for some reason that now does exactly the same. So crashes as soon as I switch.

Please help!

Many thanks

[dreckflag]

Finally it works!

I did a fresh install and resetted the settings (because it crashed many times on windows)

1. install the 2.1.4
2. open the settings menu
3. activate "all Settings" (on the bottom left side in the settings menu)
4. go to the Audio category -- enable "Force Dolby Surround"
5. Ebable "Use S/PDIF if available"
6. save
7. right click on the screen -- audio -- and then again choose your audio device

Now audio will work in 5.1!

[SilentWarrior]

I can confirm that 2.1.4 works now with 5.1

[Jemborg]

I can confirm that 2.1.4 works now with 5.1

Is that a beta?... because there is NO official 2.1.4 VLC to download that I can find

[Ludrax]

or x64 version?
news

[SilentWarrior]

I use this version: http://download.videolan.org/pub/videol ... 1.4/win64/

[elvisaloha]

works fine, thank you buddy!!!

[miqrogroove]

I can confirm that 2.1.4 works now with 5.1

Is that a beta?... because there is NO official 2.1.4 VLC to download that I can find

I allowed 2.0.8 to perform the automatic update to 2.1.4 since it's not available for download from the website. Audio works fine. Thanks for the fix.

[Phorward]

I'd be really happy if a 32 bit version of 2.1.4 was made available.

[Remote202]

My PC is connected to the AV Receiver via optical cable.

I´m using this option.



The sound is often broken when using VLC version 2.1.5 but it work´s fine with VLC version 2.0.8
(best tested with *.mkv files dd,dts,..)
Is a fix available ?

[slashpm]

I use this version: http://download.videolan.org/pub/videol ... 1.4/win64/

Perfect, this 2.1.4 solved my problem too