Page 1 of 1
m2ts no video
Posted: 03 Jun 2012 23:33
by dramadeur
Audio plays, but no video. VLC version 1.1.11
Code: Select all
General
ID : 1 (0x1)
Complete name : C:\Users\Admin\Desktop\JOURNEYEDGEUNIVERSE\BDMV\STREAM\00001.m2ts
Format : BDAV
Format/Info : Blu-ray Video
File size : 19.6 GiB
Duration : 1h 30mn
Overall bit rate : 31.0 Mbps
Maximum Overall bit rate : 35.5 Mbps
Video
ID : 4113 (0x1011)
Menu ID : 1 (0x1)
Format : VC-1
Format profile : AP@L3
Codec ID : 234
Duration : 1h 30mn
Bit rate : 28.8 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 29.970 fps
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Interlaced
Scan order : Top Field First
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.464
Stream size : 18.2 GiB (93%)
This file plays just fine in other media players. I know, I can remux it, the issue of VLC to play m2ts is still gonna be up.
Re: m2ts no video
Posted: 04 Jun 2012 00:01
by Jean-Baptiste Kempf
Please share the logs. And use 2.0.1
Re: m2ts no video
Posted: 04 Jun 2012 00:22
by Lotesdelere
Audio plays, but no video.
Code: Select all
Format : VC-1
Scan type : Interlaced
Scan order : Top Field First
viewtopic.php?p=313971#p313971
Re: m2ts no video
Posted: 04 Jun 2012 13:29
by dramadeur
Please share the logs. And use 2.0.1
Code: Select all
avcodec warning: cannot decode one frame (92630 bytes)
avcodec warning: cannot decode one frame (100980 bytes)
avcodec warning: cannot decode one frame (215144 bytes)
avcodec warning: cannot decode one frame (76354 bytes)
avcodec warning: cannot decode one frame (88104 bytes)
avcodec warning: cannot decode one frame (216308 bytes)
avcodec warning: cannot decode one frame (75173 bytes)
avcodec warning: cannot decode one frame (86694 bytes)
avcodec warning: cannot decode one frame (211863 bytes)
avcodec warning: cannot decode one frame (105454 bytes)
avcodec warning: cannot decode one frame (81299 bytes)
Verbosity level: 1
Tried with Windows Command Promt:
Code: Select all
C:\>"Program Files (x86)\VideoLAN\VLC\vlc.exe" --codec dmo
Still, no video
Also, can I set this codec on default for "m2ts" video format? Also, if I use VLC with dmo codec, will the output be in OPen GL?
Because I need Open GL, as said in this thread.
Also, tried with VLC 2.1.1. Video plays the same as with DMO codec and as without.
When I try to take a snapshot it gives me an error:
"Streaming / Transcoding failed:
VLC could not open the encoder."
Also, video plays like this (at some frames it gets normal, but then returns to displaying like this), I don't even know how to describe it in english, texturized (as in Photoshop filter)?
Re: m2ts no video
Posted: 05 Jun 2012 09:13
by Lotesdelere
Yes, you can try another video output module but it looks like the DMO feature is broken for now, at least with some versions of Windows. And VLC can't natively play most of interlaced VC-1 content, it's a work in progress.
About the screenshots, it seems that JPG snapshots are broken in v2.0.1 but you can use PNG until it's fixed.
Re: m2ts no video
Posted: 06 Jun 2012 22:51
by dramadeur
Yes, you can try another video output module but it looks like the DMO feature is broken for now, at least with some versions of Windows. And VLC can't natively play most of interlaced VC-1 content, it's a work in progress.
About the screenshots, it seems that JPG snapshots are broken in v2.0.1 but you can use PNG until it's fixed.
With png snapshot it's only a black screen.
Also, could you tell (in that thread)
what exactly makes OpenGL play video without brightness flickering on a TV?
I have an impression, that with "OpenGL" output the quality of the picture got a little bit worsened... but at least gamma/brightness is stable.
Also, MPC with Haali rendered transcodes (is it a right word here?) videoframes without brightness flickering too.
Re: m2ts no video
Posted: 08 Jun 2012 00:28
by dramadeur
well?
Re: m2ts no video
Posted: 08 Jun 2012 09:56
by Lotesdelere
As stated before, VLC can't natively play most of interlaced VC-1 content and the DMO feature might be broken.
Re: m2ts no video
Posted: 09 Jun 2012 17:14
by dramadeur
As stated before, VLC can't natively play most of interlaced VC-1 content and the DMO feature might be broken.
No, the question asked in
this post
Re: m2ts no video
Posted: 16 Jun 2012 21:25
by dramadeur
can someone answer the question already?
Re: m2ts no video
Posted: 22 Jun 2012 01:40
by dramadeur
up
Re: m2ts no video
Posted: 03 Jul 2012 19:17
by Jean-Baptiste Kempf
Probably because noone knows.
Re: m2ts no video
Posted: 12 Jul 2012 02:24
by dramadeur
Probably because noone knows.
Also, could you tell (in that thread)
what exactly makes OpenGL play video without brightness flickering on a TV?
I have an impression, that with "OpenGL" output the quality of the picture got a little bit worsened... but at least gamma/brightness is stable.
You suggested to use OpenGL output and you don't know how it fixes the problem?
btw, what is this output thing? How does it differ from the default one?
You're one of VLC developers, right? How can you not know about that!
Re: m2ts no video/blu-ray playback issue
Posted: 07 Nov 2012 20:38
by dramadeur
OMG ALARM!
The video is still not being played well by the latest VLC 2.0.4!
Media Player Classic with k-lite codecs can't properly play audio, it outputs it at 16bit integer, PCM and the sound is intermittent (annoying).
For god's sake, fix this, don't make me turn over to another media players such as KM or Light Alloy!
There's no need to be lazy. If I had knowledge on how to fix it, I'd have done it already!
Here's info about codecs of the aforementioned video:
Code: Select all
General
Unique ID : 251398534808105505767778050555392670215 (0xBD2198BBD6DE5CAB8B76F30312B5BA07)
Format : Matroska
Format version : Version 2
File size : 18.7 GiB
Duration : 1h 30mn
Overall bit rate : 29.6 Mbps
Encoded date : UTC 2012-06-06 19:02:39
Writing application : mkvmerge v5.6.0 ('Kenya Kane') built on May 27 2012 16:44:04
Writing library : libebml v1.2.3 + libmatroska v1.3.0
Video
ID : 1
Format : VC-1
Format profile : Advanced@L3
Codec ID : WVC1
Codec ID/Hint : Microsoft
Duration : 1h 30mn
Bit rate : 28.1 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 29.970 fps
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Interlaced
Scan order : Top Field First
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.452
Stream size : 17.8 GiB (95%)
Default : Yes
Forced : No
Audio #1
ID : 2
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Muxing mode : Header stripping
Codec ID : A_AC3
Duration : 1h 30mn
Bit rate mode : Constant
Bit rate : 448 Kbps
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Stream size : 290 MiB (2%)
Language : English
Default : Yes
Forced : No
Audio #2
ID : 3
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Muxing mode : Header stripping
Codec ID : A_AC3
Duration : 1h 30mn
Bit rate mode : Constant
Bit rate : 448 Kbps
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Stream size : 290 MiB (2%)
Language : Russian
Default : No
Forced : No
Text
ID : 4
Format : UTF-8
Codec ID : S_TEXT/UTF8
Codec ID/Info : UTF-8 Plain Text
Language : English
Default : Yes
Forced : No
Here's a
link to a sample of the video.
Re: m2ts no video
Posted: 08 Nov 2012 12:29
by Jean-Baptiste Kempf
This is not m2ts, but mkv...
