The VideoLAN Forums

Im going to be getting blackmagic intensity pro and was wondering if the Marquee settings like logo etc and txt
will still show if i open them from the device menu

Atm i do not use a capture card just open my streams from the dreambox and the Marquee settings show great
just like to know if i got Blackmagic pro and opened the device in vlc would the Marquee settings still all show fine

And If i was to stream from the capture device to a local http h264 format would the Marquee settings still be shown?

hi, i'm thinking of getting one too you will need additional hardware if you are going to use hdmi out on your box. yes overlays will show.
Can i ask if ur HDstreams drop for a splitsecond after connection to vlc which then affects x2 deinterlaceing (bob, linear and yadif2x) for gpu decoding?
also try setting up a playlist like this, put dm in standby and change channel in vlc

Nice how did you get that setup? no mate do no lose connect Before i had the marquee settings show up local as i just
had to set it up with vlc gui settings and used a screen capture

Now i'm trying to direct stream from the dreambox with the marquee showing still streams are fine but no marquee

:sout=#transcode{vcodec=h264,vb=1800,fps=25,scale=0,width=1280,height=720,acodec=mpga,ab=60,channels=2,samplerate=48000}:http{mux=ps,dst=:8080/} :no-sout-rtp-sap :no-sout-standard-sap :ttl=1 :sout-keep

what do i need to add please

deinterlacing is needed, if streaming to ios then httplive is needed too
something like this:
normal http streaming can leave out most of it.

playlist set up by downloading bouquet m3u rather than single channel. in vlc playlist settings check use media library and then repeat for each bouquet you use.

ta I'm sure it already deinterlaces? whats the command for the marquee

cant remember enigma2 code but go to webif, (wont work in openwebif), right click on the tv icon next to bouquet name, save as... rename services.m3u to bouquet name. job done.
to get bouquets setup initially i use DreamboxUK Services Database, then edit in dreambox edit, then again in notepad (not needed for vlc) then transfer to vlc as above, then finally remove all placeholder channels using vlc search filter.
if i change dm ip address i just use textcawler to replace in ml.xspf file

cheers i have streaming sorted i just need to know how to display my marquee txt while streaming
dude do you know what I'm on about? marquee that display the txt you put in the vlc gui
can i get this to show While streaming from my dreambox

ah sorry, thought marquee was some name for bouquet lol
in that case no, no idea, sorry
don't use them myself

ok cheers mate np hope someone can help me

as you can seem to do it to vettle

http://veetle.com/index.php/article/view/marquee

:sout=#transcode{soverlay, sfilter=marq{marquee="$N$_$T$_$D", position=5, size=14, opacity=255},vcodec=h264, venc=x264{bpyramid=none, weightp=0},vb=0,scale=0,acodec=mp4a,ab=96,channels=2,samplerate=44100}:http{mux=ts,dst=:8080/} :no-sout-rtp-sap :no-sout-standard-sap :ttl=1 :sout-keep

should this work?
x64 nightly
either crashes vlc, breaks audio, wont start streaming, late mux, or streams fine but no marquee. tested direct3d and opengl

does not work more stress on the cpu lol

hey daz any chance you could help me get the playlist on my vlc put dm in standby and change channel in vlc can you do that while streaming
would it change the channel?

Hi, didn't see your reply. if you don't have the video embedded, yes u can change stream while it is playing
The bouquets are downloaded from the net, i just split them up and make them into a vlc media library.
Here's my ml.xspf. Olympic Streams are included. Just change the ip addresses to that of your dreambox
http://fileduct.net/kvtixymt7x34

sorry for the late reply daz only just seen your msg any chance you could upload the file again ta

hello, i haven't updated them for a while and am still using these ones. viewtopic.php?f=14&t=103339&p=349579#p349579
no paraolympic streams and a few itv regions maybe a broken, but pretty much all of them are there.

daz thnx can you change channels while streaming? like with the dreambox need a code like http://192.168.1.65:8001/1:0:19:FA1:7D2:2:11A0000:0:0:0: to stream every chan has a different code
if i wanted to stream another channel i have to stop and input another key

your 2nd file says File Not Found

also deinterlacing is not needed right can set that when watching