Deinterlace not working with VLC 3 and Quadro K2000M

Microsoft Windows specific usage questions
Forum rules
Please post only Windows specific questions in this forum category. If you don't know where to post, please read the different forums' rules. Thanks.
benoitm
Blank Cone
Blank Cone
Posts: 25
Joined: 21 Sep 2006 17:43
Location: Belgium

Deinterlace not working with VLC 3 and Quadro K2000M

Postby benoitm » 23 Aug 2018 14:54

Just upgraded my 'old' laptop with VLC 3.0.3
This is a laptop with dual GPU (Intel HD Graphics 4000 & nVidia Quadro K2000M) and 'Optimus' technology. nVidia driver version 390.77 & Windows 7 Pro 64bit.
I noticed that deinterlace only works with the Intel HD Graphics 4000 (laptop display only), and does NOT work with the K2000M GPU (used when external monitors are used)
With the K2000M, forcing deinterlace on interlaced SD video has no effect, no mattter the deinterlace method chosen.
This used to work just fine with the previous version on this system, i.e. 2.2.4; I have attempted a clean reinstall of 3.0.3, no improvement.

Is there a setting I should change for deinterlace to work when using the K2000M (i.e. 99% of the usage time of this laptop) ?

garf
Developer
Developer
Posts: 132
Joined: 19 Jul 2017 09:38

Re: Deinterlace not working with VLC 3 and Quadro K2000M

Postby garf » 24 Aug 2018 09:38

Hello,

Try to deactivate the hardware acceleration:
Tools -> Preferences -> Input/Codecs -> Hardware-accelerated decoding -> Set to Disable

benoitm
Blank Cone
Blank Cone
Posts: 25
Joined: 21 Sep 2006 17:43
Location: Belgium

Re: Deinterlace not working with VLC 3 and Quadro K2000M

Postby benoitm » 24 Aug 2018 14:49

Yes, with hardware acceleration disabled, it works fine. Who's the culprit ? It worked fine with 2.2 :(

garf
Developer
Developer
Posts: 132
Joined: 19 Jul 2017 09:38

Re: Deinterlace not working with VLC 3 and Quadro K2000M

Postby garf » 29 Aug 2018 09:16

VLC 2.2 version hardware acceleration was disabled by default.

The culprit is probably your GPU driver, which claims that it is able to decode some codecs.

benoitm
Blank Cone
Blank Cone
Posts: 25
Joined: 21 Sep 2006 17:43
Location: Belgium

Re: Deinterlace not working with VLC 3 and Quadro K2000M

Postby benoitm » 29 Aug 2018 09:22

Fair enough...I have to stick to the GPU driver version certified for my video editing app :P
I can live with HW acceleration disabled - thanks for the tip

benoitm
Blank Cone
Blank Cone
Posts: 25
Joined: 21 Sep 2006 17:43
Location: Belgium

Re: Deinterlace not working with VLC 3 and Quadro K2000M

Postby benoitm » 19 Jun 2020 21:50

FYI, I am facing this problem again (deinterlacing not functioning properly, e.g. no "fluid" playback with 50i content in Bob or YADIF2x mode)
This time it is on a Microsoft Surface Pro 7, with Intel Iris Plus GPU (26.20.100.7641 driver, as updated by Microsoft Windows Update)
Observed with VLC 3.0.10 & 3.0.11 (doesn't mean the problem wasn't there with earlier versions on this GPU)
The workaround (disable VLC hardware decoding) is OK, but the result is probably less battery-friendly.

Note that the Windows 10 app "Films & TV" displays 50i content in the expected fluid way without cheating

Jean-Baptiste Kempf
Site Administrator
Site Administrator
Posts: 37523
Joined: 22 Jul 2005 15:29
VLC version: 4.0.0-git
Operating System: Linux, Windows, Mac
Location: Cone, France
Contact:

Re: Deinterlace not working with VLC 3 and Quadro K2000M

Postby Jean-Baptiste Kempf » 20 Jun 2020 10:26

FYI, I am facing this problem again (deinterlacing not functioning properly, e.g. no "fluid" playback with 50i content in Bob or YADIF2x mode)
This time it is on a Microsoft Surface Pro 7, with Intel Iris Plus GPU (26.20.100.7641 driver, as updated by Microsoft Windows Update)
Observed with VLC 3.0.10 & 3.0.11 (doesn't mean the problem wasn't there with earlier versions on this GPU)
The workaround (disable VLC hardware decoding) is OK, but the result is probably less battery-friendly.

Note that the Windows 10 app "Films & TV" displays 50i content in the expected fluid way without cheating
Does it work in software mode?
Jean-Baptiste Kempf
http://www.jbkempf.com/ - http://www.jbkempf.com/blog/category/Videolan
VLC media player developer, VideoLAN President and Sites administrator
If you want an answer to your question, just be specific and precise. Don't use Private Messages.

benoitm
Blank Cone
Blank Cone
Posts: 25
Joined: 21 Sep 2006 17:43
Location: Belgium

Re: Deinterlace not working with VLC 3 and Quadro K2000M

Postby benoitm » 20 Jun 2020 14:33

Yes, as said, when I disable 'tools -> Preferences -> Input/Codecs -> Hardware-accelerated decoding' it works fine (at the expense of significantly higher battery drain)

Jean-Baptiste Kempf
Site Administrator
Site Administrator
Posts: 37523
Joined: 22 Jul 2005 15:29
VLC version: 4.0.0-git
Operating System: Linux, Windows, Mac
Location: Cone, France
Contact:

Re: Deinterlace not working with VLC 3 and Quadro K2000M

Postby Jean-Baptiste Kempf » 20 Jun 2020 14:37

And in hardware decoder, but keeping the auto deinterlace, does it work?
Jean-Baptiste Kempf
http://www.jbkempf.com/ - http://www.jbkempf.com/blog/category/Videolan
VLC media player developer, VideoLAN President and Sites administrator
If you want an answer to your question, just be specific and precise. Don't use Private Messages.

benoitm
Blank Cone
Blank Cone
Posts: 25
Joined: 21 Sep 2006 17:43
Location: Belgium

Re: Deinterlace not working with VLC 3 and Quadro K2000M

Postby benoitm » 20 Jun 2020 15:25

in hardware decoder, but keeping the auto deinterlace, there is deinterlacing occurring but it always results in 25 fps video, no matter the method chosen. Bob and YADIF2x should yield smooth, fluid motion (during panning, etc.) with 50i material.
IOW there is no visible difference between YADIF and YADIF2x (which is not the case with hw decoding disabled, or on another computer with a nVidia GPU)

Jean-Baptiste Kempf
Site Administrator
Site Administrator
Posts: 37523
Joined: 22 Jul 2005 15:29
VLC version: 4.0.0-git
Operating System: Linux, Windows, Mac
Location: Cone, France
Contact:

Re: Deinterlace not working with VLC 3 and Quadro K2000M

Postby Jean-Baptiste Kempf » 23 Jun 2020 15:23

in hardware decoder, but keeping the auto deinterlace, there is deinterlacing occurring but it always results in 25 fps video, no matter the method chosen. Bob and YADIF2x should yield smooth, fluid motion (during panning, etc.) with 50i material.
IOW there is no visible difference between YADIF and YADIF2x (which is not the case with hw decoding disabled, or on another computer with a nVidia GPU)
Yes, this is something we will fix in 4.0
Jean-Baptiste Kempf
http://www.jbkempf.com/ - http://www.jbkempf.com/blog/category/Videolan
VLC media player developer, VideoLAN President and Sites administrator
If you want an answer to your question, just be specific and precise. Don't use Private Messages.


Return to “VLC media player for Windows Troubleshooting”

Who is online

Users browsing this forum: No registered users and 31 guests

cron