unable to play dvb-s with ss2

[dorijan]

Hi..
I am unable to play any channel with techinstar skystar2 pci with vlc

this is how it looks:
mrl: dvb-s://frequency=12460000
options: :dvb-srate=27500

error is:

Code: Select all

Your input can't be opened: VLC is unable to open the MRL 'dvb-s://frequency=12460000'. Check the log for details.

and this is
message :

Code: Select all

main debug: processing request item dvb-s://frequency=12460000 node Playlist skip 0 main debug: resyncing on dvb-s://frequency=12460000 main debug: dvb-s://frequency=12460000 is at 0 main debug: starting new item main debug: creating new input thread main debug: Creating an input for 'dvb-s://frequency=12460000' main debug: thread (input) created at priority 1 (input/input.c:230) main debug: thread started qt4 debug: IM: Setting an input main debug: using timeshift granularity of 50 MBytes main debug: using timeshift path 'C:\Windows\Temp' main debug: `dvb-s://frequency=12460000' gives access `dvb-s' demux `' path `frequency=12460000' main debug: creating demux: access='dvb-s' demux='' path='frequency=12460000' main debug: looking for access_demux module: 0 candidates main debug: no access_demux module matched "dvb-s" main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms) main debug: creating access 'dvb-s' path='frequency=12460000' main debug: looking for access module: 1 candidate bda warning: CreateTuneRequest: Cannot find a suitable System Tuning Space: hr=0x80004005 bda warning: SubmitDVBSTuneRequest: Cannot create Tune Request: hr=0x80004005 bda warning: DVB_Open: Unsupported Network dvb-s main warning: no access module matching "dvb-s" could be loaded main debug: TIMER module_need() : 4.000 ms - Total 4.000 ms / 1 intvls (Avg 4.000 ms) main error: open of `dvb-s://frequency=12460000' failed: (null) main debug: finished input main debug: dead input main debug: thread ended main debug: thread times: real 0m0.000000s, kernel 0m0.000000s, user 0m0.000000s main debug: changing item without a request (current 0/1) main debug: nothing to play qt4 debug: Updating the geometry qt4 debug: size: 106 - 349 qt4 debug: sizeHint: 106 - 349 qt4 debug: Updating the geometry qt4 debug: size: 106 - 349 qt4 debug: sizeHint: 106 - 349 qt4 debug: IM: Deleting the input qt4 debug: Updating the geometry qt4 debug: size: 106 - 349 qt4 debug: sizeHint: 106 - 349 qt4 debug: Updating the geometry qt4 debug: size: 106 - 349 qt4 debug: sizeHint: 106 - 349 main debug: Destroying the input for 'dvb-s://frequency=12460000' main debug: TIMER input launching for 'dvb-s://frequency=12460000' : 18.000 ms - Total 18.000 ms / 1 intvls (Avg 18.000 ms)

i tried using bda drivers and other usual drivers...
I can tune with dvbviewer and dvbviewer and everything is ok...
VLC is 1.0.0 Goldeneye

[VLC_help]

You use the tuner via QT4 GUI? Or you just paste the MRL?

[dorijan]

via gui(with wizard), or if I paste, its all the same...it does not work
I even tried with command prompt vlc dvb-s://frequency=12460000 :dvb-srate=27500
but without success
It seems when I use bda drivers for skystar2 in messages there is this line main debug: looking for access module: 1 candidate

but when I use native drivers there are 0 candidates, so I suppose it find some kind card...

[VLC_help]

Only BDA drivers are supported. And because you get warnings

bda warning: CreateTuneRequest: Cannot find a suitable System Tuning Space: hr=0x80004005
bda warning: SubmitDVBSTuneRequest: Cannot create Tune Request: hr=0x80004005

with both method, I assume VLC code changes are required to make it work.

[dorijan]

ok...i have BDA drivers for skystar2 card installed and they are working with other programs like mediaportal, so I assume it is problem with VLC...
Is ther any other card that is working with sattelite reception?
I want also to congrat to vlc team, for milestone release of version 1.0 and now streaming and transcoding with h264 of DVB-T is finaly working )))

[dorijan]

I tried with latest 1.1-pre version but it is not working..
can someone tell me if I am doing it right?
so I have transponder on 10832 Mhz, so I am putting 10832000 and for 22000 symbol rate, I am putting 22000000
is that right?
this should open whole transponder, so I could choose programs that are on that transponder