Vlc configured Dvb-S-card as Dvb-T-device ?
Posted: 14 Jan 2012 17:37
Hey!
My system-info: ubuntu 11.10 (newest v4l-dvb compiled and installed) , vlc v.1.1.12 , Installed devices: one and only WinTV-Nova-HD-S2 PCI TV-card (registered per "dmesg | grep dvb).
I would open with vlc my TV-card by frequenc and symbol-rate. "media"-->"open capture device"--> "capture mode=DVB"--> "DVB-Type=DVB-S"--> i filled in the transponderfrequency and the symbol-rate and then i pushed the button "play", after i becomed a message that "can't open this frequency" . I looked at the error console verbosity-level 2 with the following ....
I wrong configured vlc settings and where i must change the settings ?
I hope everybody help me
bye
My system-info: ubuntu 11.10 (newest v4l-dvb compiled and installed) , vlc v.1.1.12 , Installed devices: one and only WinTV-Nova-HD-S2 PCI TV-card (registered per "dmesg | grep dvb).
I would open with vlc my TV-card by frequenc and symbol-rate. "media"-->"open capture device"--> "capture mode=DVB"--> "DVB-Type=DVB-S"--> i filled in the transponderfrequency and the symbol-rate and then i pushed the button "play", after i becomed a message that "can't open this frequency" . I looked at the error console verbosity-level 2 with the following ....
Code: Select all
qt4 warning: Input option: dvb-adapter=0
qt4 warning: Input option: dvb-srate=27500000000
qt4 warning: Input option: file-caching=300
main debug: adding item `dvb://frequency=12188000' ( dvb://frequency=12188000 )
main debug: rebuilding array of current - root Wiedergabeliste
main debug: rebuild done - 1 items, index -1
main debug: processing request item dvb://frequency=12188000 node Wiedergabeliste skip 0
main debug: resyncing on dvb://frequency=12188000
main debug: dvb://frequency=12188000 is at 0
main debug: starting new item
main debug: creating new input thread
main debug: Creating an input for 'dvb://frequency=12188000'
main debug: selected audio language[0] de
main debug: selected audio language[1] any
main debug: selected subtitle language[0] de
main debug: thread (input) created at priority 10 (input/input.c:220)
main debug: thread started
main debug: TIMER input launching for 'dvb://frequency=12188000' : 9951315.000 ms - Total 9951315.000 ms / 1 intvls (Avg 9951315.000 ms)
main debug: using timeshift granularity of 50 MiB
main debug: using timeshift path '/tmp'
main debug: `dvb://frequency=12188000' gives access `dvb' demux `' path `frequency=12188000'
main debug: creating demux: access='dvb' demux='' path='frequency=12188000'
qt4 debug: Adding a new MRL to recent ones: dvb://frequency=12188000
main debug: looking for access_demux module: 0 candidates
main debug: no access_demux module matched "dvb"
main debug: TIMER module_need() : 0.147 ms - Total 0.147 ms / 1 intvls (Avg 0.147 ms)
main debug: creating access 'dvb' path='frequency=12188000'
main debug: looking for access module: 1 candidate
dvb debug: Opening device /dev/dvb/adapter0/frontend0
qt4 debug: IM: Setting an input
dvb debug: Frontend Info:
dvb debug: name = Conexant CX24116/CX24118
dvb debug: type = OFDM (DVB-T)
dvb debug: frequency_min = 950000 (kHz)
dvb debug: frequency_max = 2150000 (kHz)
dvb debug: frequency_stepsize = 1011
dvb debug: frequency_tolerance = 5000
dvb debug: symbol_rate_min = 1000000 (kHz)
dvb debug: symbol_rate_max = 45000000 (kHz)
dvb debug: symbol_rate_tolerance (ppm) = 0
dvb debug: notifier_delay (ms) = 0
dvb debug: Frontend Info capability list:
dvb debug: inversion auto
dvb debug: forward error correction 1/2
dvb debug: forward error correction 2/3
dvb debug: forward error correction 3/4
dvb debug: forward error correction 4/5
dvb debug: forward error correction 5/6
dvb debug: forward error correction 6/7
dvb debug: forward error correction 7/8
dvb debug: forward error correction auto
dvb debug: card can do QPSK
dvb debug: card can recover from a cable unplug
dvb debug: End of capability list
dvb debug: trying to tune the frontend...
dvb debug: using inversion=2
dvb debug: using bandwidth=0
dvb debug: using fec=9
dvb debug: using fec=9
dvb debug: using transmission=0
dvb debug: using guard=0
dvb debug: using hierarchy=0
dvb error: DVB-T: setting frontend failed (-1): Invalid argument
dvb error: DVB-T: tuning failed
main debug: no access module matching "dvb" could be loaded
main debug: TIMER module_need() : 159.340 ms - Total 159.340 ms / 1 intvls (Avg 159.340 ms)
main error: open of `dvb://frequency=12188000' failed: (null)
main debug: thread ended
main debug: dead input
main debug: changing item without a request (current 0/1)
main debug: nothing to play
qt4 debug: IM: Deleting the input
I hope everybody help me
bye