dvb warning: no lock, tuning again

[Barf]

Hi there, i'm a newbie to streaming. I have installed the VLC software from the site (automatically) and have just tried the basic 'wizard' for streaming. I have a usb DVB stick (not a tv card) and am running Opensuse.

Once i have run the wizard i get the following in the message box:

dvb warning: no lock, tuning again
dvb debug: using inversion=2
dvb debug: using bandwidth=0
dvb debug: using fec=9
dvb debug: using fec=9
dvb debug: using transmission=0
dvb debug: using guard=0
dvb debug: using hierarchy=0

This just repeats again and again. Have i not set up something correctly or is there some other problem? I would appreciate any help please.

Thanks

[Rémi Denis-Courmont]

Looks like you've not provisioned the right transponder settings to VLC.

[Barf]

Thanks for the reply.

I don't know how to find these out. Is this a difficult process? How do i find the settings for my setup?

[Barf]

Just to add an update. I have uninstalled VLC and reinstalled by compiling with DVB. Now when i run the same simple wizard i get the following output in the messages screen:

main debug: using sout mux module "mux_ts"
main debug: muxer support adding stream at any time
stream_out_standard debug: mux opened
main debug: using sout stream module "stream_out_standard"
main debug: `dvb://' gives access `dvb' demux `' path `'
main debug: creating demux: access='dvb' demux='' path=''
main debug: looking for access_demux module: 0 candidates
main warning: no access_demux module matched "dvb"
main debug: creating access 'dvb' path=''
main debug: looking for access2 module: 6 candidates
dvb debug: Opening device /dev/dvb/adapter0/frontend0
dvb debug: Frontend Info:
dvb debug: name = WideView USB DVB-T
dvb debug: type = OFDM (DVB-T)
dvb debug: frequency_min = 44250000 (kHz)
dvb debug: frequency_max = 867250000 (kHz)
dvb debug: frequency_stepsize = 250000
dvb debug: frequency_tolerance = 0
dvb debug: symbol_rate_min = 0 (kHz)
dvb debug: symbol_rate_max = 0 (kHz)
dvb debug: symbol_rate_tolerance (ppm) = 0
dvb debug: notifier_delay (ms) = 0
dvb debug: Frontend Info capability list:
dvb debug: inversion auto
dvb debug: forward error correction 1/2
dvb debug: forward error correction 2/3
dvb debug: forward error correction 3/4
dvb debug: forward error correction 5/6
dvb debug: forward error correction 7/8
dvb debug: forward error correction auto
dvb debug: card can do QPSK
dvb debug: card can do QAM 16
dvb debug: card can do QAM 64
dvb debug: card can do QAM auto
dvb debug: transmission mode auto
dvb debug: guard interval mode auto
dvb debug: hierarchy mode auto
dvb debug: card can recover from a cable unplug
dvb debug: End of capability list
dvb debug: trying to tune the frontend...
dvb debug: using inversion=2
dvb debug: using bandwidth=0
dvb debug: using fec=9
dvb debug: using fec=9
dvb debug: using transmission=0
dvb debug: using guard=0
dvb debug: using hierarchy=0
dvb debug: Opening device /dev/dvb/adapter0/dvr0
dvb debug: setting filter on PAT
dvb debug: Opening device /dev/dvb/adapter0/demux0
dvb debug: DMXSetFilter: DMX_PES_OTHER for PID 0
dvb debug: Opening device /dev/dvb/adapter0/ca0
dvb warning: CAMInit: opening CAM device failed (No such file or directory)
main debug: using access2 module "dvb"
main debug: pre buffering
dvb warning: no lock, tuning again
dvb debug: using inversion=2
dvb debug: using bandwidth=0
dvb debug: using fec=9
dvb debug: using fec=9
dvb debug: using transmission=0
dvb debug: using guard=0
dvb debug: using hierarchy=0

In the shell console (where VLC was invoked from) i get:


[00000261] main interface error: option dvdnav-caching does not exist
[00000261] main interface error: option dvdnav-caching does not exist



Can anyone help please.

Thanks

[tosty]

Hi,

What kind of antenna have you ? If your tuner doesn't lock, it maybe because the signal is not strong enough.

Tosty