*SOLVED* no lock, tuning again

[pluto70]

Hi,

so I finally get dvb-streaming to work, but I still have some little problems.

Every few seconds I get an "no lock, tuning again"

Here the log:

Code: Select all

[00000279] ts demuxer warning: discontinuity received 0x5 instead of 0x2 (pid=163) [00000279] ts demuxer warning: discontinuity received 0xa instead of 0x9 (pid=106) [00000279] ts demuxer warning: discontinuity received 0x6 instead of 0x5 (pid=105) [00000308] a52 packetizer debug: emulated sync word (no sync on following frame) [00000277] dvb access warning: no lock, tuning again [00000277] dvb access debug: using inversion=2 [00000277] dvb access debug: using fec=9 [00000277] dvb access debug: using voltage=18 [00000277] dvb access debug: using tone=1 [00000279] ts demuxer warning: discontinuity received 0xd instead of 0x3 (pid=163) [00000279] ts demuxer warning: discontinuity received 0xc instead of 0xb (pid=106) [00000279] ts demuxer warning: discontinuity received 0xe instead of 0xd (pid=105) libdvbpsi error (PSI decoder): TS discontinuity (received 14, expected 11) for PID 18 [00000276] main private warning: late buffer for mux input (45943) [00000276] main private warning: late buffer for mux input (24261) [00000276] main private warning: late buffer for mux input (1890) [00000308] a52 packetizer debug: emulated sync word (no sync on following frame) [00000279] ts demuxer debug: EITCallBack called [00000279] ts demuxer debug: new EIT service_id=12090 version=29 current_next=1 ts_id=1089 network_id=1 segment_last_section_number=1 last_table_id=78 [00000279] ts demuxer debug: * event id=41507 start_time:mjd=53913 06:00:00 duration=04:00:00 running=4 free_ca=0 [00000279] ts demuxer debug: - short event lang=ger 'Der Morgen bei n-tv' : '' [00000279] ts demuxer debug: - tag=0x54(84) FIXME: TS demuxer meta is broken FIXME: TS demuxer meta is broken [00000279] ts demuxer debug: * event id=41508 start_time:mjd=53913 10:00:00 duration=00:30:00 running=0 free_ca=0 [00000279] ts demuxer debug: - extended event lang=ger [00000279] ts demuxer debug: - text='- WM-News...' [00000279] ts demuxer debug: - short event lang=ger 'Der Mittag bei n-tv' : '' [00000279] ts demuxer debug: - tag=0x54(84) FIXME: TS demuxer meta is broken [00000263] main input debug: EsOutProgramMeta: number=12090 [00000277] dvb access warning: no lock, tuning again [00000277] dvb access debug: using inversion=2 [00000277] dvb access debug: using fec=9 [00000277] dvb access debug: using voltage=18 [00000277] dvb access debug: using tone=1 [00000279] ts demuxer warning: discontinuity received 0x3 instead of 0x8 (pid=163) [00000279] ts demuxer warning: discontinuity received 0xb instead of 0x9 (pid=106) [00000279] ts demuxer warning: discontinuity received 0x3 instead of 0x2 (pid=105) [00000308] a52 packetizer debug: emulated sync word (no sync on following frame) libdvbpsi error (PSI decoder): TS discontinuity (received 13, expected 11) for PID 17 [00000279] ts demuxer debug: SDTCallBack called [00000277] dvb access warning: no lock, tuning again [00000277] dvb access debug: using inversion=2 [00000277] dvb access debug: using fec=9 [00000277] dvb access debug: using voltage=18 [00000277] dvb access debug: using tone=1 [00000279] ts demuxer warning: discontinuity received 0x5 instead of 0x9 (pid=163) [00000279] ts demuxer warning: discontinuity received 0xa instead of 0x9 (pid=105) [00000279] ts demuxer warning: discontinuity received 0xe instead of 0xc (pid=106) [00000279] ts demuxer warning: discontinuity received 0x6 instead of 0x5 (pid=104) [00000308] a52 packetizer debug: emulated sync word (no sync on following frame) [00000299] mpeg_audio packetizer debug: emulated startcode (no startcode on following frame) [00000335] main private warning: backward_pts != current_pts (-40000)

I'm using Suse 10.1 / Kernel 2.6.16 (from SuSE but with handmake 2.6.17 I have this problem also), VLC-Head and an SkyStark 2 Rev 02

Any ideas?

UPDATE:

I found that after about 30 Mins I lost the signal completly with no stream. If I restart vlc all works like described above.
I forgot to say that using dvdstream works perfect so I can say that I have no problems with card or driver.

Code: Select all

[00000277] dvb access warning: no lock, tuning again [00000277] dvb access debug: using inversion=2 [00000277] dvb access debug: using fec=9 [00000277] dvb access debug: using voltage=13 [00000277] dvb access debug: using tone=1 [00000277] dvb access warning: no lock, tuning again [00000277] dvb access debug: using inversion=2 [00000277] dvb access debug: using fec=9 [00000277] dvb access debug: using voltage=13 [00000277] dvb access debug: using tone=1 [00000277] dvb access warning: no lock, tuning again [00000277] dvb access debug: using inversion=2 [00000277] dvb access debug: using fec=9 [00000277] dvb access debug: using voltage=13 [00000277] dvb access debug: using tone=1 [00000277] dvb access warning: no lock, tuning again [00000277] dvb access debug: using inversion=2 [00000277] dvb access debug: using fec=9 [00000277] dvb access debug: using voltage=13 [00000277] dvb access debug: using tone=1

[pluto70]

Next Update:

If I let femon running and tune with szap to some channel (no matter what channel) ber-rate remains at 0. If I do this with vlc I can see that femon shows up ber-sizes over 0 every few seconds and then vlc show "no lock, tuning agian".

I'm not expert but could it be a problem that vlc can't keep the tuner enabled and the driver-timeout turns off the tuner after some seconds??

I have no idea where to keep searching about this.

[pluto70]

Problem has been solved, it was a bug in vlc and was corrected at svn r15960.

Thanks to Dnumgis who found this bug after some tests.